• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.2 no.3
• /
• pp.237-241
• /
• 2002

In this paper, we describe how to represent hand witten decimal digits by a sequence of one to five fuzzy sets. Each fuzzy set represents an arc segment of the digit and is a Cartesian product of four fuzzy sets; the first is fur the arc length of the segment, the second is for the arc direction, the third is fur the arc shape, and the fourth is a crisp number indicating whether it has a junction point and if it has an end point of a stroke. We show that an arbitrary pair of these sequences representing two different digits is mutually disjoint. We also show that various forms of a digit written in different styles can be represented by the same sequence of fuzzy sets and hence the deviations due to different writers can be modeled by using these fuzzy sets.

• Journal of the korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.48-59
• /
• 1990

A finite element program was developed using line elements for simulating the stretch/draw forming operation of an arbitrarily-shaped plane-strain section. An implicit, incremental, updated Lagrangian formulation is employed, introducing a minimum plastic work path assumption for each time step. Geometric and material nonlinearities are also considered within each time step. The finite element equation is based on the mesh-normal, which compatibly describes arbitrary tool surfaces and FEM meshes without depending on the explicit spatial derivatives of tool surfaces. The membrane approximation is adopted under the plane stress assumption. The sheet material is assumed to obey a rigid-viscoplastic constitutive law. The developed program was tested in the die-tryout of typical automotive inner panels. In order to determine a single friction coefficient and boundary length, FEM results and measurements of thinning for a stretched section of final die were compared. After finding analysis parameters, the sheet forming operations of original and final die designs were simulated. Excellent agreement between measured and computed thickness strains was obtained and the developed program was able to identify die designs which were rejected during die tryout.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.6
• /
• pp.76-85
• /
• 1993

In this paper, we propose a stroke matching method for the off-line recognition of handprinted Hangul. In this method, the preprocessing steps such as position normalization, contour tracing and thinning are carried out first. Then, after extracting features such as the firection component distribution of contour, the direction component distribution of skeleton, and the distribution of structural feature points, strokes are extracted and matched based on the midpont distribution of the direction and the length of each stroke. In order to reduce the recognition time, a preliminary classification based on the direction component distribution features of the contour is performed. In order to domonstrate the performance of the proposed method, experiments with 520 most frequently used Hangul were performed, and 90.7% of correct recognition rate and 0.46second of recognition time per one character has been obtained. This results reveal that the proposed method can absorb effectively the noise in input character and the variations of stroke slant.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.35 no.2
• /
• pp.103-110
• /
• 2009

The objective of this study is to analyze the influences of fatty alcohols and fatty acids on rheological properties of oil in water (O/W) emulsions using viscosity and rheograms. As the chain length of fatty alcohols and fatty acids lengthened, the viscosity of emulsions was increased. The influence of fatty alcohols on viscosity enhancement was stronger than that of fatty acids. Both stearyl alcohol and cetearyl alcohol, which have carbon chain length similar to lipophilic portion of surfactant used in emulsion preparation, had showed the best increase in viscosity of O/W emulsions. O/W emulsions prepared with fatty alcohols and fatty acids were pseudo-plastic fluid and they showed shear thinning behaviour like as the common cosmetic emulsions. O/W emulsions prepared with cetyl alcohol, cetearyl alcohol and stearyl alcohol were thixotropic fluids and thixotropy increased with an increase in the concentration of fatty alcohols and fatty acids. Also O/W emulsions prepared with fatty alcohols were more thixotropic than those prepared with fatty acids. For the sake of viscosity increase related to O/W emulsions stability and spreadability enhancement related to payoff, it is thought that fatty alcohols are more useful than fatty acids in the O/W emulsions as the emulsion stabilizer.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.7
• /
• pp.377-385
• /
• 2013

In this study, the performance of an impeller according to blade length and pitch angle was studied experimentally by building a variable pitch impeller while changing blade length to review the effect of blade length and pitch angle on a fan's performance. The pitch angle was changed in six steps from $20^{\circ}{\sim}45^{\circ}$ at intervals of $5^{\circ}$ while the blade lengths were changed to 90 mm, 100 mm, 110 mm and 120 mm with an identical airfoil shape while carrying out the experiment. The results are summarized as follows : The air flow per static pressure of axial fans increased linearly with increase of pitch angle, but the high static pressure showed a decrease at a pitch angle of $35^{\circ}$. The shaft power increased proportionally to the pitch angle at all blade lengths; the larger the pitch angle, the larger the measured increase of shaft power. This is because the drag at the fan's front increases with the pitch angle. In the axial fans considered in this research, the flow and incre.

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.185-196
• /
• 2000

Patients who want to reduce their lip protrusion usually estimate the severity of the lip protrusion on the frontal aspect. Most orthodontists have a perplexed experience of a reduced thin line of vermilion border on the frontal aspect as incisors we retracted, even though the lip protrusion is thought to be reduced favorably on the sagittal aspect. Some patients also look older after orthodontic treatment because of severe lip thinning. This unaesthetic reduction of vermilion border urges us to study the vertical lip change during orthodontic procedure. The purpose of this study was to evaluate the vertical lip and perioral soft tissue changes in respect to incisor retraction in an effort to analyze which factors might be responsible for their vertical changes, using the multiple regression analysis. The results were as follows. 1. Upper and lower lip philtrum length(SnLs, LiB') were increased after retraction of anterior teeth, where as upper and lower vermilion height(LsSuls, StmiLi), and vermilion length(LsLi) were decreased. 2. Upper and lower lip length(SnStms, StmiB'), and soft tissue lower anterior facial height(SnMe') did not show any significant difference after treatment. 3. The increase of the upper lip philtrum length was mainly influenced by the extrusion of upper anterior teeth(${\Delta}U1V$), and the increase of the lower lip philtrum length was mainly influenced by the initial overjet before treatment. 4. The decrease of the upper and lower lip vermilion height was mainly influenced by the decrease of upper lip thickness.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.15 no.1
• /
• pp.85-93
• /
• 2013

This study has been conducted to investigate the effect of GA₃ solution dipping treatment after 1 days full bloom on spike growth and fruit quality at harvest of 'Campbell Early' grapevine. The fruit cluster growth(weight, length, width) and fruit stalk(diameter, length) at harvest were increased significantly by GA₃ 10 mg·L^-1 solution dipping treatment compared to control and another concentration. The berry growth (berry No, weight, length, diameter) at harvest showed no difference by treatment GA₃ concentration different. Spike weight was increased by GA₃ 5, 10, 20, mg·L^-1 treatment compared to control, but no difference GA₃ 40 mg·L^-1 treatment. The degree of compact berry, bloom, skin color and SSC at harvest by GA₃ solution dipping treatment were not significantly different from those of control. but increased seedlessness induction by GA₃ 10 mg·L^-1 treatment. The occurrence percent of berry cracking by GA₃ 5, 10, 20, 40 mg·L^-1 treatment significantly decreased. The bitter rot of berry harvest showed no difference by treatment GA₃ concentration different. Total spike length was increased by GA₃ 5, 10 mg·L^-1 treatment compared to control and GA₃ 20, 40 mg·L^-1 treatment. The spike length of 1st from 15th to position increased by GA₃ 10 mg·L^-1 treatment.

• The Korean Journal of Ecology
• /
• v.17 no.2
• /
• pp.203-211
• /
• 1994

The establishment by seeds and the maintenance by ramets of the autumn olive (Elaeagnus umbellata) population were investigated in the Namhansansung Provincial Park, Jungbu-myun, Kwangju-gun, Kyunggi-do. Seed production and germination rate were 3, 300 $seeds{\cdot}m^{-2}{\cdot}yr^{-1}$ and 52%, respectively. The ramet formation in the population was classified into 4 types: stump type, creeping root type, lateral root type and secondary creeping root type. The subterranean creeping roots were 0.1~1.0 m in length, 4.5~14.0 mm in diameter and 0.06~0.2 m in soil depth. The number of ramets formed from a node was 1~21. The subterranean roots spread $5~509cm^2{\cdot}plant^{-1}{\cdot}yr^{-1}$, which began to be produced from 7~9 year-old individuals. The number of stems was 1~67 per stump, which was reduced by self-thinning from 2 to 14 year-old trees. The frequency distribution of stem diameter$(D_{30})$ showed a reverse J-shaped curve, suggesting that this population be maintained perpetually by their own ramets.

• Archives of Reconstructive Microsurgery
• /
• v.16 no.1
• /
• pp.14-22
• /
• 2007

Perforator free flap (PFF) is currently a major reconstructive option for soft tissue reconstruction in adults. Although PFFs have been used commonly, most reconstructive surgeons still hesitate to perform PFFs in children. The main cause of concern is the perceived high failure rate related to the small diameter of children's perforator vessels. We present 8 consecutive cases of successful transfer of thoracodorsal artery (TDA) & anterolateral thigh (ALT) perforator flap in children. Between 2003 and 2005, 8 children(4 to 13 years old) with soft tissue defects of the extremities were reconstructed with TDA & ALT PFFs. All flaps completely survived. There were no problems relating to vascular spasm or occlusion. Range of motion of reconstructed extremities were fully recovered. Among 8 patients, only 1 patient was performed an additional flap thinning procedure. 8 cases of TDA & ALT perforator flaps were successfully transferred in children. PFF is an excellent option in reconstruction of children as well as in adults because of its thinness, long pedicle length, least donor site morbidity and acceptable donor site scar.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.06a
• /
• pp.93-98
• /
• 2006

Warm forming technology was classified into hot gas forming of using compressible fluid as a nitrogen gas and warm hydroforming of using the incompressible fluid as a thermal oil by using medium fluid. In this study, the aluminum side-rail part was developed with warm hydroforming technology. For the warm hydroforming system, top and bottom die was designed to insert heating cartridge in die cavity and special indirect fluid heating system was designed to heat the thermal oil. As increase the temperature, hydroformability was increased linearly. Aluminum side-rail center part was formed 90% at the internal pressure of 100bar and perfectly formed at 300bar within a moderate temperature. The tube material used for warm hydroforming was a aluminum 6000 series alloy with the diameter of 120mm, thickness of 5mm, length of 1,300mm. Warm hydroformed side-rail center part had 20% of maximum expansion ratio and below 20% of maximum thinning ratio at corner radius. This results were provided to show warm hydroforming possibility for aluminum automotive components.