• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2004년도 추계 기술심포지움 초록집
• /
• pp.3-4
• /
• 2004

A flexible Packaging scheme, which embedded chip packaging, has been developed using a thinned silicon chip. Mechanical characteristics of thinned silicon chips are examined by bending test and finite element analysis. Thinned silicon chips ($t<50{\mu}m$) are fabricated by chemical etching process to avoid possible surface damages on them. These technologies can be use for a real-time monitoring of blood pressure. Our research targets are implantable blood pressure sensor and its telemetric measurement. By winding round the coronary arteries, we can measure the blood pressure by capacitance variation of blood vessel.

• 대한기계학회논문집A
• /
• 제29권7호
• /
• pp.947-954
• /
• 2005

The purpose of this study is to develop failure pressure evaluation models, which are applicable to straight pipes and elbows containing an internally wall thinning defect induced by flow-accelerated-corrosion (FAC). In this study, thus, three dimensional finite element (FE) analyses are performed to investigate the dependences of failure pressure of internally wall thinned pipe on the defect shape, the pipe geometry, and the defect location and bend radius of elbow. Also, the existing failure pressure assessment models for externally wall thinned pipes are examined. Based on these, the new models for assessing failure pressure of piping components with an internally wall thinning defect are proposed. Comparison of failure pressure, predicted by proposed models, with FE analysis result shows good agreement regardless of pipe type, defect shape, and defect location and bend radius.

• 한국압력기기공학회 논문집
• /
• 제11권2호
• /
• pp.51-60
• /
• 2015

Local wall thinning and integrity degradation caused by several mechanisms, such as flow accelerated corrosion, cavitation, flashing and/or liquid droplet impingement, is a main concern in secondary steam cycle piping system of nuclear power plants in terms of safety and operability. Thinned pipe management program (TPMP) has being developed and optimized to reduce the possibility of unplanned shutdown and/or power reduction due to pipe failure caused by wall thinning. In this paper, newest technologies, standards and regulations related to the integrity assessment, repair and replacement of thinned pipe component are reviewed. And technical improvement items in TPMP to secure the reliability and effectiveness are also presented.

• Journal of the Korean Wood Science and Technology
• /
• 제28권4호
• /
• pp.51-55
• /
• 2000

The woodceramics which are new porous carbon materials were obtained by carbonizing from thinned small log of Aomori HIBA (Thujopsis dolabrata S. et. Z. var. hondae M.) impregnated with phenol resin in a vacuum furnace. During the carbonization process, the resin changes into glassy carbon, which has superior property. The resin impregnation rate and bending strength depend on the types of board and density. In this paper, the manufacturing method of woodceramics made from thinned small logs of Aomori HIBA was introduced and some properties were examined.

• 한국압력기기공학회 논문집
• /
• 제7권1호
• /
• pp.27-34
• /
• 2011

The objective of this study is to classify the geometry of wall-thinning defect that causes a circumferential crack in the pipe elbows subjected to internal pressure. For this objective, first of all a criterion to determine the occurrence of circumferential cracking at wall-thinned area was developed based on finite element simulation for burst tests of pipe elbow specimens that showed axial and circumferential cracking at wall-thinned area. In addition, parametric finite element analysis including various wall-thinning geometries, locations, and pipe geometries was conducted and the wall-thinning geometries that initiate circumferential crack were determined by applying the criterion to the results of parametric analysis. It showed that the circumferential crack occurs at wall-thinning defect, which has a deep, wide, and short geometry. Also, it is indicated that the pipe elbows with larger radius to thickness ratio are more susceptible to circumferential cracking at wall-thinned area.

• Nuclear Engineering and Technology
• /
• 제32권1호
• /
• pp.67-76
• /
• 2000

Significant wall thinning due to flow accelerated corrosion(FAC）was recently reported in main feedwater pipes in 3 Korean pressurized water reactor(PWR) plants. The main feedwater pipes in one plant were repaired using overlay weld method at the outside of pipe, while those in 2 other plants were replaced with new pipes. In this study, the effect of the wall thinning in the main feedwater pipes on piping integrity was evaluated using finite element method. Especially, the effects of both the overlay weld repair and the stress concentration in notch-type thinned area on the piping integrity were investigated. The results are as follows : (1) The piping load carrying capacity may significantly decrease due to FAC. In special, the load carrying capacity of the main feedwater pipe was reduced by about 40% during about 140 months operation in Korean PWR plants. (2) By performing overlay weld repair at the outside of pipe, the piping load carrying capacity can increase and the stress concentration level in the thinned area can be reduced.

• 임산에너지
• /
• 제22권1호
• /
• pp.44-48
• /
• 2003

국산 간벌 소경재인 리기다소나무(Pinus rigida Mill.), 소나무(Pinus densifora Sieb. et Zucc), 일본잎갈나무(Larix kaemferi Carr) 및 상수리나무(Quercus acutissima Carr.)로 만든 무결점재에 대한 휨특성을 조사하였다. 휨강도와 탄성계수는 수종에 따라 차이가 있었다. 비중이 큰 상수리나무가 가장 큰 휨강도와 탄성계수를 나타냈으며, 비중이 작은 일본잎갈나무가 가장 작은 값을 나타냈다. 휨탄성계수와 휨강도는 응력파 탄성계수와 양호한 정의 상관관계를 나타내어 응력파 탄성계수에 의해 휨 특성 예측이 가능하였다.

• 한국압력기기공학회 논문집
• /
• 제18권1호
• /
• pp.11-18
• /
• 2022

When wall-thinning in a pipe occurs during operation of nuclear power plant, reinforcement of the pipe needs to be performed. Accordingly, the structural response of the piping system due to introduction of the reinforcement may be re-evaluated. For elastic structural analysis of the piping system with the reinforced pipe using finite element (FE) analysis, the stiffness of the reinforced pipe is needed. In this study, the stiffness matrix of wall-thinned pipe with pad reinforcement or composite reinforcement is analytically derived. The validity of the proposed equations is checked by comparing with systematic finite element (FE) analysis results.

• 한국화재소방학회논문지
• /
• 제22권1호
• /
• pp.45-53
• /
• 2008

본 논문은 숲가꾸기 산물인 간벌목이 산불에 미치는 영향에 대하여 연구하였다. 즉, 간벌목이 산불에 미치는 영향을 조사하고자 강원도 양양군과 인제군, 경기도 가평군의 숲가꾸기 실행지와 미실행 지역을 선정하였다. 이 조사대상지에 대하여 수종, 입지특성, 간벌강도, 숲가꾸기 종류, 간벌재의 적재행태 및 산불위험도에 대한 조사를 수행하였다. 조사대상지인 양양군 5개소, 가평군 4개소, 인제군 5개소 총 14개 조사구에 대하여 숲가꾸기 실행지 9개소, 미실행지 5개소에 대한 현장조사를 실시하였다. 숲가꾸기 미실행지 5개소는 숲가꾸기 실행지와 인접한 조사지역을 선정하였고, 숲가꾸기 실행지와의 산불위험도에 대해 비교 분석을 수행하였다. 본 연구의 조사결과 숲가꾸기 실행지의 산물인 간벌목의 적재높이는 1 m 미만으로 적재되어 있어 산불연소시 수관부로 전파될 위험성은 거의 없는 것으로 판단되었다. 그러나 적재된 간벌목과 임목간의 거리가 거의 붙어 있어 적재된 간벌목에 산불이 붙을 경우 임목 줄기부(수간)에 직접영향을 줄 것으로 판단된다. 그리고 적재된 간벌목이 많이 쌓여 있을 경우 이로 인하여 재발화의 가능성이 있을 것으로 판단되었다.

• The Journal of the Acoustical Society of Korea
• /
• 제17권4E호
• /
• pp.22-27
• /
• 1998

A modified perturbation method is proposed to optimize the beam pattern of thinned microphone arrays. Both microphone spacing and array weight are iteratively adjusted via successive perturbation to achieve an optimum beam pattern in a Dolph Chebyshev sense. To improve the sidelobe performance, an alternative perturbation with respect to microphone spacing and array weight is implemented. Also, a linear space-tapering is employed in the perturbation process. It is demonstrated that the proposed approaches successfully yield sidelobe performances comparable to that of a normal array. Computer simulation results are presented.