• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.6
• /
• pp.1-9
• /
• 2003

In this paper, we propose a new fingerprint feature extraction method using the convex structure. A fingerprint minutiae flows along the uniform direction and is regarded as a sinusoidal signal across the normal direction. Local maxima of the signal represent coarse thinned one-pixel-wide ridges in which the convex region of the signal correspond to ridges. The proposed fingerprint feature extraction method detects the convex structure and local maxima. Finally fingerprint features are extracted from one-pixel-wide ridges. Because it has no parameter, it is efficient for various fingerprint identification systems.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.269-272
• /
• 1999

It is still hard to measure the strain distribution over entire surface of a medium or large-size stamped part even by using an automated strain measurement system. Several methods which enable to enlarge the measurement range without losing accuracy and precision are suggested in this study, The superposition of images having different high-lightened or damaged part each other results in an enhanced image. A new method for constructing the element connectivity from a line-thinned image makes it possible to identify up to 1,000 elements. And the geometry assembling algorithm is proved very efficient in which the whole area to be measured is divided into several parts ; the coordinate transformation between every two adjacent parts is obtained from the concept of the least square error ; and the 3-D shape or strain distribution over the whole surface is assembled,

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.177-180
• /
• 2003

초 박형 실리콘 칩을 이용하여 실리콘 칩들을 포함한 모듈 전체가 굽힘이 자유로운 유연 패키징 기술을 구현하였으며 bending test와 FEA를 통해 초 박형 실리콘 칩의 기계적 특성을 살펴보았다. 초 박형 실리콘칩$(t<30{\mu}m)$은 표면손상의 가능성을 배제하기 위해 화학적 thinning 방법을 이용하여 제작되었으며 열압착 방식에 의해 $Kapton^{(R)}$에 바로 실장 되었다. 실리콘칩과 $Kapton^{(R)}$ 기판간의 단차가 적기 때문에 전기도금 방식으로 전기적 결선을 이룰 수 있었다. 이러한 방식의 패키징은 이러한 공정은 flip chip 공정에 비해 공정 간단하고 wire 본딩과 달리 표면 단차 적다. 따라서 연성회로 기관을 비롯한 인쇄회로기판의 표면뿐만 아니라 기판 자체에 삽임이 가능하여 패키징 밀도 증가를 기대할 수 있으며 실질적인 실장 가능면적을 극대화 할 수 있다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.2
• /
• pp.50-55
• /
• 2012

Fabry-Perot (FP) resonator antennas with scan capabilities are described in this paper. The proposed antennas, excited by a thinned array, not only achieve higher directivities but also improve suppression of sidelobes relative to that of the thin array alone. Compared to the conventional microstrip patch array, the directivity enhancement and suppression of sidelobe level were achieved by increase of the aperture size of the proposed Fabry-Perot resonator antenna.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.6
• /
• pp.802-813
• /
• 2000

This paper represents numerical computations of the interaction between the longitudinal vortex and a flat plate 3-D turbulent boundary layer. In the present study, the main interest is in the behavior of longitudinal vortices introduced in turbulent boundary layers. The flow field behind vortex generator is modeled by the information that is available from studies on the delta winglet. Also, the Reynolds-averaged Navier-Stoke equations for three-dimensional turbulent flows, together with a two-layer turbulence model to resolve the near-wall flow, is solved by the method of pseudo compressibility. The present results show that the boundary layer is thinned in the regions where the secondary flow is directed toward the wall and thickened where it is directed away from the wall, and have a good agreement with the experimental data.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1727-1732
• /
• 2008

We present a facile, yet versatile carbon nanofabrication method using electron beam lithography and resist pyrolysis. Various resist nanopatterns were fabricated using a negative electron beam resist, SAL-601, and were then subjected to heat treatment in an inert atmosphere to obtain carbon nanopatterns. Suspended carbon nanostructures were fabricated by wet-etching of an underlying sacrificial oxide layer. Free-standing carbon nanostructures, which contain 122 nm-wide, 15 nm-thick, and 2 ${\mu}m$-long nanobridges, were fabricated by resist pyrolysis and nanomachining processes. Electron beam exposure dose effects on resist thickness and pattern widening were studied. The thickness of the carbon nanostructures was thinned down by etching with oxygen plasma. An electrical biosensor utilizing carbon nanostructures as a conducting channel was studied. Conductance modulations of the carbon device due to streptavidin-biotin binding and pH variations were observed.

• Journal of Korean Neurosurgical Society
• /
• v.59 no.5
• /
• pp.525-528
• /
• 2016

Preservation of the optic nerves is an important issue in the resection of tuberculum sellae meningiomas. We report the case of a patient whose optic nerve was penetrated by a tuberculum sellae meningioma. During surgery, a bulging tumor was found to penetrate the right optic nerve. The tumor was gross totally removed, including tumors bulging through the optic nerve. Two trunks of the split optic nerve were preserved. The penetrated shape of the optic nerve may lead to misjudgment and its damage. Divided trunks of optic nerves are difficult to recognize and may be confused for the tumor capsule, because they may be thinned and seem to contain tumors. In addition, a single trunk may be confused for the whole nerve; thus, the other trunk may be easily damaged if not dissected cautiously. Treatment strategy according to the remnant visual acuity was suggested.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.106-108
• /
• 1994

Electromigration(EM) tests were carried out on Al and Cu films in HV systems to study surface migration. The Al films were made on oxidized silicon wafers by thermal evaporation, in-situ annealed at 300$^{\circ}C$, patterned, and EM tested at 260$^{\circ}C$ and 4.5MA/$\textrm{cm}^2$. SEM observation with back scattered electron mode on the EM tested Al films disclosed that thinning took place under the native Al oxide. In the case of Cu films, tested using in-situ TEM, thinning was also observed at the early stage of void formation even though the thinned areas were much less than those of the Al films.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.27-28
• /
• 2006

This study performs to investigate deformation of wall thinning pipe and to find out the position of the internal thinning defect by shearography. Shearography is one of optical methods those have applied to nondestructive testing (NDT) and the strain/stress analysis. This technique has the merit of the directly measuring the first derivative of displacement, sensitivity of which can be adjusted by the handling of optical component in interferometer. In this paper, we tested carbon steel pipe locally wall thinned and loaded internal pressure and developed the nondestructive out-of-plane deformation analysis technique fur internal thinning defect of elbow by shearography. From the results, it was confirmed that this technique is proper to the practical application on the pipe line system with internal defect.

• Journal of Veterinary Clinics
• /
• v.34 no.3
• /
• pp.204-207
• /
• 2017

We report the successful treatment of feline acute bullous keratopathy (FABK) and corneal perforation with a conjunctival hood graft. Two cats with FABK and corneal perforation had severe corneal edema with large central bullae. Their corneas were thinned and perforated. Conjunctival hood grafts were performed. All corneas recovered after 3-4 weeks. The grafts were then removed from the cornea using superficial keratectomy and no ocular irritation was observed. One month later, the corneas had recovered, although there was very mild fibrosis. The cats had normal vision without any corneal problems at this time. Conjunctival hood graft was thus useful for the treatment of severe FABK and allowed the cats to maintain vision.