• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.2
• /
• pp.63-67
• /
• 2008

3D integration technology has been a major focus of the next generation of IC industries. In this study Si wafer ultra-thinning has been investigated especially for the effect of ultra-thinning on the silicon surface. Wafers were grinded down to $30{\mu}m\;or\;50{\mu}m$ thickness and then grinded only samples were compared with surface treated samples in terms of surface roughness, surface damages, and hardness. Dry polishing or wet etching treatment has been applied as a surface treatment. Surface treated samples definitely showed much less surface damages and better roughness. However, ultra-thinned Si samples have the almost same hardness as a bulk Si wafer.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.1
• /
• pp.12-19
• /
• 2012

This study conducted infrared (IR) thermography tests using pipe and plate specimens with artificial wall-thinning defects to find an optimal condition for IR thermography test on the wall-thinned nuclear piping components. In the experiment halogen lamp was used to heat the specimens. The distance between the specimen and the lamp and the intensity of halogen lamp were regarded as experimental parameter. When the distance was set to 1~2 m and the lamp intensity was above 60 % of full power, a single scanning of IR thermography detected all artificial wall-thinning defects, whose minimum dimension was $2{\Theta}=90^{\circ}$, d/t=0.5, and $L/D_o=0.25$, within the pipe of 500 mm in length. Regardless of the distance between the specimen and the lamp, the image of wall-thinning defect in IR thermography became distinctive as the intensity of halogen lamp increased. The detectability of IR thermography was similar for both plate and pipe specimens, but the optimal test condition for IR thermography depended on the type of specimen.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.5
• /
• pp.321-331
• /
• 2015

A study on the application of cooling defect detection was performed on the basis of a preceding study on the heated defect detection in nuclear piping loop system, using lock-in infrared thermography. A loop system with piping defects was made by varying the wall-thinning length, the circumference orientation angle, and the wall-thinning depth. The test was performed using an IR camera and a cooling device. Distance between the cooling device and the target loop system was fixed at 2 m. For analyzing experimental results, the temperature distribution data for cooling, and phase data were obtained. Through the analysis of this data, the defect length was measured. The reliability of the measurements for cooling defect conditions was shown to be higher in the lock-in infrared thermography data than the infrared thermography data.

• Journal of Agricultural Extension & Community Development
• /
• v.7 no.1
• /
• pp.167-173
• /
• 2000

This study was carried out to investigate suitable pruning methods to avoid poor berry setting of 'Kyoho' grapevine in Suwon and Anseong areas. Light pruning increased percentage of bud bursts and number of shoots per bearing mother branches(BMB), cluster weight and percentage of berry sating but it decreased shoot length, number of leaves and, leaf area and leaf weight. There was little difference in soluble solids, titratable acidity, and anthocyanin contents of berries by the treatment of either light or heavy pruning. Shoot length became longer as diameter of BMB thickened, leaf area and chlorophyll content also became larger and diameter of BMB. Total carbohydrate and N, P, K, Ca, and Mg contents showed significantly little difference, but total carbohydrate and Ca contents showed a tendency of continuous increase as diameter of BMB thinned. Number of seeded berries per cluster became fewer as BMB thinned but percentage of berry setting showed an increasing tendency. Cluster weight, berry weight, berry number per cluster, soluble solids, anthocyanin content were higher in case of around 1cm of diameters of BMB.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.11 no.1
• /
• pp.131-143
• /
• 1984

150 rats weighting about 150gm were devided into control group of 80 and experimental group of 70. Control group was subdivided into the irradiated vitamin D injection group and X-ray irradiated group. Experimental group was given 2.0mg ergocalciferol by four intramuscular injection prior to X-ray irradiation with single 800 rads and 1,500 rads respectively. Experimental animals from each group was sacrificed after 1, 3, 7, 14, and 28 days and their incisors were investigated by histopathological examination. The results were as follows; 1. In the irradiated groups, it showed dentin hypoplasia and formation of dentinoid substance caused by degeneration of odontoblast at the early stage. Especially, 1,500 rads group which was severely effected showed formation of osteoid dentin at the apical portion and severe injuries of dental papilla at the first week. 2. In the vitamin D2 administration group, it showed thinned dentin layer at the early stage but, taking time, predentin and dentin layer was thickened. At the fourth week, dentin was chiefly composed of interglobular dentin, especially in the lingual portion. 3. Using in combination of overdose vitamin D2 administration and X-ray irradiation, it effected severely odontoblast, undifferentiated mesenchymal cells around tooth germ and pulp tissue. At the early stage, dentin layer was thinned but, taking time, it was thickened and composed of interglobular dentin caused by calcification of predentin layer. 4. In 800 rads irradiation after the overdose vitamin D2 administration, it showed formation of osteoid dentin in the lingual portion at the first week. In the 1,500 rads irradiation after the overdose vitamin D2 administration, it showed formation of osteoid dentin and degeneration of ameloblast in both buccal and lingual portion at the first week, and enamel hypoplasia caused by edema and loss of polarity of ameloblasts at the second week. 5. By the entire experiment, the overdose vitamin D2 administration and X-ray irradiation effected severely odontoblasts, undifferentiated mesenchymal cells of dental papilla, and primitive cells of tooth germ among the dental tissue. Especially using combination of overdose vitamin D2 administration and X-ray irradiation also effected ameloblasts, resulting in enamel hypoplasia.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.1
• /
• pp.34-39
• /
• 2013

In the advanced research deducted infrared thermography (IRT) test using 4 inch pipe with artificial wall-thinning defect to measure on the wall-thinned nuclear pipe components. This study conducted for defect detection condition of nuclear small-bore pipe research using deducted condition in the advanced research. Defect process is processed by change for defect length, circumferential direction angle, wall-thinning depth. In the used equipment IR camera and two halogen lamps, whose full power capacitany is 1 kW, halogen lamps and Target pipe experiment performed to the distance of the changed 1 m, 1.5 m, 2 m. To analysis of the experimental results ensure for the temperature distribution data, by this data measure for defect length. artificial defect of 4 inch pipe is high reliability in the 2 m, but small-bore pipe is in the 1.5 m from the defect clearly was detected.

• Horticultural Science & Technology
• /
• v.18 no.3
• /
• pp.373-377
• /
• 2000

This study was carried out to verify the effect of fruit thinning on fruit development, and the results were as follows. The number of cells between fruit epidermis and periphery vascular bundle during 35 to 184 days after full bloom (DAFB) were constant with 14~17 cells, regardless of thinning at pink bud stage, fruitlet stage or non-thinning. However, the distance between epidermis and vascular bundle was longest in the fruit thinned at pink stage followed by fruits thinned at fruitlet stage and control. Therefore, it was seemed that the fruit size increment during 35 to 184 DAFB was due to the increment of cell size. Thinning time affected fruit size and the earlier the thinning times were the bigger the fruits were. However, there were no direct relationships between thinning time and the starch or tannin particle development in the cells of the fruit.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1675-1680
• /
• 2010

Flow Accelerated Corrosion (FAC) occurring during in-service conditions results in localized wall-thinning in the feeder pipes of CANDU. The wall-thinning of the feeder pipes is the main degradation mechanisms affecting the integrity of piping systems. In this paper, we assess the integrity of wall-thinned feeder pipes by limit load analysis. The limit loads for wall-thinning feeder pipes subjected to in-plane bending and internal pressure were determined on the basis of finte element limit analyses. The limit loads are determined from the results of limit analyses of elasticperfectly-plastic materials using the large geometry change. Closed-form approximations of limit load solutions for wall-thinning feeder pipes subjected to in-plane bending and pressure are proposed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.3667-3671
• /
• 2015

Through experiment that does not cause wrinkles in the forming process for the primary purpose for install PCB(Printed circuit board) the thickness variation of the material was investigated. Experimental results was showed that the forming height of the first process had Influence Material thickness variation in the second process, in the first process, the Entrance corner of the die must have round of the product height of 50%, and The height of forming should be as high as the thickness of the material than the original forming. Also as do implement the forming shape in the first process, the thickness of the material is thinned to 85%, Restriking in the second process was that The thickness of the material is thinned to 80%. Therefore, In order to implement a precise shape, Thinking that the material thinning, The die was maintain the shape of the original product, and It was obtain the effect of the compression that the punch is to be longer, as the sum of more than 20% of the material thickness in the depth of the original product.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.3
• /
• pp.315-325
• /
• 2009

The thickness of the material can be thinned because arch cut-and-cover tunnel has the support mechanism by the axial force, and the ground reaction force due moderate deformation can be expected thereby making it be dynamically advantageous, therefore the arch cut-and-cover tunnel has become more widely used. An important characteristic of the arch cut-and-cover tunnel is that the thickness of the material can be thinned because precast arch type has the support mechanism by the axial force. However, there is a different stress state surrounding the structures between normally excavated tunnels and cut-and-cover tunnels, it should be considered at designing. Therefore, finite element method was carried out to examine the mechanical behavior of the precast arch cut-and-cover tunnel considering construction procedure.