• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.115.1-115.1
• /
• 2005

• Proceedings of the KWS Conference
• /
• 2008.05a
• /
• pp.9-9
• /
• 2008

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.117-120
• /
• 1999

본 논문은 희소어레이의 패턴을 원하는 패턴과 실제 희소어레이의 패턴간의 오차의 계수적 자승치를 최소화하여 최적화하는 방법을 제시한다 센서의 간격이 어레이 중심에 관하여 대칭인 경우와 비대칭인 경우에 대하여 성능을 점검하며, 어레이 공간의 주어진 영역의 오차함수에 성능 향상을 위하여 계수를 적용한다. 주빔 부근의 측면롭의 효과적인 제어를 위하여 지수 함수적인 계수를 제안하였으며 그 결과 측면롭의 수준이 전체적으로 균등하게 분포되는 패턴을 얻을 수 있었다. 이 결과는 입력잡음신호가 어레이 공간상에 균등하게 입사될 때 효과적으로 사용될 수 있다.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.283-286
• /
• 2002

Most of the Automatic Fingerprint Identification Systems define the ridge endings and bifurcation points as the minutia for matching. Therefore, the precise extraction of the minutia is critical in raising the efficiency and reliability of the system. The fingerprint images produced through the preprocessing may have the false minutia happened over the process and they can be the factors to decrease the system efficiency This paper suggests the algorithm, which removes the false minutia after extracting the candidate minutia from the thinned binary images of fingerprint images.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1985.10a
• /
• pp.109-112
• /
• 1985

This paper proposes a algorithm of phonemes extraction in korean character pattern recognition. The phonemes are classified into the patterns which are separable and connected with each other. The former is extracted by means of pattern matching in consideration of topological structure of ponemes and direction of stroke sequentially. The latter is extracted by means of index and window algorithm which are performed by a 3$\times$3 sequential local operation in the thinned character pattern.

• ETRI Journal
• /
• v.26 no.1
• /
• pp.53-56
• /
• 2004

In this letter, we propose a novel design scheme for an optimal non-uniform planar array geometry in view of maximum side-lobe reduction. This is implemented by a thinned array using a genetic algorithm. We show that the proposed method can maintain a low side-lobe level without pattern distortion during beam steering.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.292-293
• /
• 2013

Sub 10-nm thick of Si plate is simulated with the software for Nanowire Field Effect Transistor (FET) device simulation. With usual single crystal Si technology, it is difficult to realize flexible electronic devices. Here, we suggest a FET device based on thinned Si layer. The simulation implied a practical limitation of the Si plate thickness for flexible devices as 2 nm. With around this thickness, Si plate may have much flexibility than existing bulk MOSFETs.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.3
• /
• pp.313-318
• /
• 2012

In CANDU, feeder pipes supply heavy water to pressure tube and steam generator. Under service conditions, Flow-Accelerated Corrosion (FAC) produces local wall-thinning in the feeder pipes. The wall-thinning in these pipes affects the integrity of the piping system, as verified in previous research. This paper provides limit loads for wallthinned feeder pipes with $45^{\circ}$ and $60^{\circ}$ bend angles, and proposes an equation that predicts the limit loads for wallthinned feeder pipes with arbitrary bend angles. On the basis of finite element limit analyses, limit loads are obtained for wall-thinned feeder pipes under in-plane bending and internal pressure. There are two cases of in-plane bending: the in-plane closing direction and the in-plane opening direction. The material is considered the effect of the large deformation, so an elastic-perfectly-plastic material is assumed in the calculations.

• The Korean Journal of Ecology
• /
• v.19 no.4
• /
• pp.253-261
• /
• 1996

This study was conducted to clarify the relationship between bird community and forest structure from early May to mid June, 1988 in two sites which had different forest structures due to silvicultural practice, located in the Tomakomai Experimental Forest of Hokkaido University, Hokkaido, Japan. Quantitative ahbitat analysis was applied to elucidate difference between the two study sites, and territory mapping method and guild analysis were used for assessment of the bird community. Dominant tree species were Quercus mongolica, Magnolia obovata, Prunus sargentii, Acer mono and Tilia japonica. Unithinned site had more foliage coverage in upper and middle layers, but in lower layer had less coverage than thinned site. Thirty four species of birds were recorded and of them only 21 species occupied territories within the study area. Dominant species were Ficedula narcissina, Phylloscopus occipitalis, Parus major, Passer rutilans, Sitta europaea and Parus palustris in the study area. The unmber of breeding species of the two sites were equal, but the species composition of breeding bird communities was different between the sites. The number of species and pairs on hole-nesting guild were greater in the unthinned site, but those on ground-nesting guild were greater in the thinned site. Canopy-nesting guild showed no significant difference between the two sites. Silvicultural practice such as proper thinning appeared to be not inadequate to all of the forest birds, probably good to bush and ground nesting guild, and to tree & bush and ground foraging guild. The silvicultural practice also did not considerably affect the hole and canopy-nesting guild.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.2
• /
• pp.69-75
• /
• 2001

This study was carried out to investigate the properties of woodceramics made from thinned logs of Cryptomeria japonica. In order to find the effect of steam injection time on the woodceramics fabricated with boards, boards were made with the non-steamed treatment and steamed treatment 1, 5, 10 min. at $250^{\circ}C$. The percentage of weight loss was proportional to the increased density of board The reducing rate of length and thickness, however, decreased with increasing density of board. The rate of weight loss, length and thickness reduction in non-steamed board were slightly higher than those of steamed board. When the resin impregnation rate increased, the bending strength and compressive strength of woodceramics had a tendency to increase. The bending strength and compressive strength of woodceramics in non-steamed board was higher than those of steamed board. But there was little difference between dimensional and strength properties of woodceramics and steam injection time of board.