• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.700-705
• /
• 2004

Shell finite elements are widely used for the analysis of thin section objects such as sheet metal parts, automobile bodies and et al. due to their computational efficiency. Since many of input data for finite element analysis are given as solid models or triangulated surface models, one should extract midsurface information from these input data initially and then construct shell meshes on the extracted midsurfaces. In this paper, a method of generating shell elements on midsurfaces directly from input models have been proposed. In order to construct shell meshes, the input models should be triangulated on surfaces first, and then tetrahedral elements are generated by using an advancing front method, and finally mid shell surfaces are obtained from tetrahedral meshes. Some examples are given to demonstrate the efficiency of the proposed method.

• Structural Engineering and Mechanics
• /
• 제55권4호
• /
• pp.785-799
• /
• 2015

A three-dimensional (3-D) method of analysis is presented for determining the free vibration frequencies of hyperboloidal shells free at the top edge and clamped at the bottom edge like a hyperboloidal cooling tower by the Ritz method based upon the circular cylindrical coordinate system instead of related 3-D shell coordinates which are normal and tangent to the shell midsurface. The Legendre polynomials are used as admissible displacements. Convergence to four-digit exactitude is demonstrated. Natural frequencies from the present 3-D analysis are also compared with those of straight beams with circular cross section, complete (not truncated) conical shells, and circular cylindrical shells as special cases of hyperboloidal shells from the classical beam theory, 2-D thin shell theory, and other 3-D methods.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.85-88
• /
• 1999

We fabricated resistive superconducting fault current lmiters based on YBa$_2$Cu$_3$O$_{7}$ thin films and investigated their quench propagation characteristics. The YBa$_2$Cu$_3$O$_{7}$ film was coated with a gold layer and patterned into 1 mm wide meander lines by photolithography. The limiters were tested with simulated fault currents of various fault angles and amplitudes. The quench propagation characteristics were explained based on the heat transfer within the film as well as between the film and the surrounding liquid nitrogen. The quench completion time strongly depended on the potential fault current. It was 1 msec at the peak fault current of 76 A/peak/ and corresponding quench propagation speed was 43 m/sec (film cross section: 4 x 10$^{-6}$ $\textrm{cm}^2$).

• 대한치과의사협회지
• /
• 제49권2호
• /
• pp.85-94
• /
• 2011

In the filed of Dentistry, minimally invasive treatment modalities are new trend for conservation of natural teeth. Of them, laminate veneer and resin bonded fixed partial denture belong to restoration procedures. In this review, survival rates of each modalities and cause of unserviceability are analyzed, and criteria for success are presented. To get successful results of minimally invasive restoration, plenty of enamel layer, thin and strong materials, and high bonding strength are essential under cyclically loaded wet oral condition. Newly tried design of minimally invasive technique nowadays have to be evaluated only on the basis of requirement for long-term success.

• Steel and Composite Structures
• /
• 제22권6호
• /
• pp.1465-1486
• /
• 2016

Conventional plate I-girders are sensitive to local buckling of the web when they are subjected mainly to shear action because the slenderness of the web in out-of-plane direction is much bigger. The local buckling of the web can also cause the distorsion of the plate flange under compression as a thin-walled plate has very low torsional stiffness due to its open section. A new I-girder consisted of corrugated web, a concrete-filled rectangular tubular flange under compression and a plate flange under tension is presented to improve its resistance to local buckling of the web and distorsion of the flat plate flange under compression. Experimental tests on a conventional plate I-girder and a new presented I-girder are conducted to study the failure process and the failure mechanisms of the two specimens. Strain developments at some critical positions, load-lateral displacement curves, and load-deflection curves of the two specimens have all be measured and analyzed. Based on these results, the failure mechanisms of the two kinds of I-girders are discussed.

• 한국표면공학회지
• /
• 제35권2호
• /
• pp.122-128
• /
• 2002

This study was conducted to synthesize the diamond like carbon films by plasma enhanced chemical vapor deposition (PECVD). The effects of gas composition on growth and mechanical properties of the films were investigated. A little amount of hydrogen or oxygen were added to base gas mixture of methane and argon. Methane dissociation and diamond like carbon nucleation were enhanced by installing negatively bias grid near substrate. The deposited films were indentified as hard diamond like carbon films by micro-Raman spectroscopy. The surface and fractured cross section of the films which were observed by scanning electron microscopy showed that film growth is very slow as about 0.3$\mu\textrm{m}$/hour, and relatively uniform with hydrogen addition. Vickers hardness of tungsten carbide (WC) cutting tool increased from about 1000 to 1600~1800 by deposition of DLC film, that of commercial TiN coated tool was about 1270. In cutting test of aluminum 6061 alloy, DLC coated cutting tool showed 1/3 or lower crater and flank wear than TiN coated or non-coated WC cutting tools.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 추계학술대회 논문집
• /
• pp.140-141
• /
• 2007

The arc ion plating (AIP) technique has been used widely for thin coating in the area of surface engineering. The TiN coating is important in the field of dies, cutting tools and other mechanical parts. When forming the TiN films by AIP technique, the processing parameters such as arc power, bias voltage, working pressure, temperature of substrate and pre-treatment affected the adhesion respectively. The results of scratch test revealed that the adhesion strength was influenced by arc power most strongly. And a sequence of the importance of each parameters has been obtained. The crystal structure and cross-section of TiN films are also be investigated.

• Journal of Chest Surgery
• /
• 제53권4호
• /
• pp.211-216
• /
• 2020

Esophageal fistulas may occur in an advanced stage or as a potentially life-threatening complication of treatment. They can be divided into esophageal-respiratory and esophageal-aorta fistulas. The diagnosis is confirmed with fluoroscopy using dilute barium oral contrast, followed by thin-section computed tomography, which defines the precise location and extent of the fistula. Flexible esophagoscopy and bronchoscopy are required for confirmation and anatomic assessment of the suspected fistula and provide additional information for treatment planning. Contamination is traditionally controlled by surgical exclusion, along with a jejunal feeding tube. Currently, fully covered self-expanding metal stents are the primary treatment option.

• 한국광물학회지
• /
• 제4권1호
• /
• pp.51-55
• /
• 1991

산청 할로이사이트의 전자 회절분석 및 레플리카와 박편을 이용한 형태 연구결과 관산 할로이사이트는 반경이 서로 다른 몇 개의 관들이 중첩되어 있으며 내부의 작은 관은 원형이나 외부의 큰 관은 다각형으로서 두 관 사이에 삼각형의 공극이 형성되어 있음이 관찰되었다. 할로이사이트의 단면은 대체로 직경이 500${\AA}$보다 작으면 원형을 이루고 그보다 크면 다각형을 이룬다. 다각형의 단면을 갖는 할로이사이트의 전자 회절상은 이들이 이층 단사 구조를 갖고 있음을 지시한다.

• 한국산학기술학회논문지
• /
• 제9권3호
• /
• pp.690-694
• /
• 2008

본 논문에서는 비행체 방어를 위해 널리 사용되고 있는 채프의 레이다 반사 단면적(RCS Radar Cross Section) 계산 방법에 대해 다루었다. 채프의 RCS는 바람, 비행체의 속도, 대기확산 속도 등에 따라서 달라진다. 채프를 레이다 사용주파수 대역에서 다이폴 안테나로 가정하고, 다이폴 안테나의 산란특성 분석을 통하여 RCS 값을 예측하였다. 본 논문에서는 다이폴 모델을 이용한 이론적 계산 결과와 전산모사를 이용하여 계산한 RCS를 비교하였으며 유사한 결과를 얻었다.