• The Research Journal of the Costume Culture
• /
• v.28 no.5
• /
• pp.639-651
• /
• 2020

This study utilized data to classify and characterize the body types of plus-size adult men aged in their 30s and 40s. Diversity is an important factor in the era of inclusive design, and discussion about size diversity to include the plus size should be accommodated. Data from 493 adult men classified as obese (with a World Health Organization criterion ≥25 BMI) were used for the analysis. The results of the study are as follows. Six independent factors were extracted using factor analysis for cluster analysis, which were then classified into five types. Type 1 (29.01%) was identified as body type I with the smallest degree of obesity. Type 2 (15.4%) was identified as body type Y with wide shoulders and a thin waist. Type 3 (14.2%) was the largest body volume (body type O), while the fourth (19.27%) identified as body type H has a large height and upper body. Lastly, type 5 (22.11%) has a long lower body and a slim abdomen, referred to as body type X. This study presents a basis for the development of various clothing sizes utilizing the body shape characteristics of plus-size men in their 30s and 40s. Follow-up research is needed to develop patterns for plus size men and to design various products.

• Journal of the Korean Society of Costume
• /
• v.57 no.7
• /
• pp.153-161
• /
• 2007

In 2004, Mal-gun(抹裙) was excavated from a plastered tomb in Seok-nam-dong, In-cheon. This tomb is assumed to be from an upper-class woman. The excavated Mal-gun was used to fill in the empty spaces in coffin, and it was seriously damaged and foxed dark. The Mal-gun is made with thin, loose Sook-cho(숙초), and the width of the fabric is 70cm. Both sides of the crotches are overlapped in front, and the back is opened. The waist straps are detached, leaving a little part to show the width of the straps. The hems of the Mal-gun are sewed straight, without any pleats, except some spaces for the feet to go through. This study compared the Mal-gun of Joseon Dynasty from the documentary records and picture records with the excavated Mal-gun from Seok-nam-dong, In-chceon. Also, actual Mal-gun was manufactured according to the excavated Mal-gun to study the process of manufacturing and the formation. As a result, the excavated Mal-gun has the same form of that shown in Ak-hak-gwae-bum, a documentary record from the early period of Joseon Dynasty.

• Fashion & Textile Research Journal
• /
• v.11 no.1
• /
• pp.121-129
• /
• 2009

Nowadays, global interest is being placed on research and development of smart clothing which is expected to create a high added-value industry in the future. The purpose of this research is to develop smart pants with vibrating massage functions that have excellent outer appearances and provide comfort to wearers and assess outer appearance, comfort, and massaging effects of smart pants. As the results of this research, smart pants where vibrating devices which are mainly composed of vibrating motor, controller, and switch are attached were completed. Vibrating motors were fixed on a thin and light non-woven fabric material, covered with a mesh material, and attached by snaps to the experiment pants. Switch was attached to the inside of a pocket, and batteries were positioned inside of pockets. Ten subjects marked their satisfaction of wearing smart pants on a 5-point scale. Noticeable changes in outer appearance when vibrating motors operate turned out to be low. Wearer's comfort in back waist and front thigh parts where vibrating motors were attached turned out to be high-satisfied. Massaging effects of smart pants turned out to be high. Attaching and detaching vibrating devices turned out to be convenient. Lining materials used for smart paints were effective in blocking electromagnetic waves generated from vibrating devices.

• Journal of the Optical Society of Korea
• /
• v.16 no.3
• /
• pp.305-312
• /
• 2012

We numerically demonstrate the performance of a plasmonic lens composed of an array of nanoslits perforated on thin metallic film with slanted cuts on the output surface. Embedding Kerr nonlinear material in nanoslits is employed to modulate the output beam. A two dimensional nonlinear-dispersive finite-difference time-domain (2D N-D-FDTD) method is utilized. The performance parameters of the proposed lens such as focal length, full-width half-maximum, depth of focus and the efficiency of focusing are investigated. The structure is illuminated by a TM-polarized plane wave and a Gaussian beam. The effect of the beam waist of the Gaussian beam and the incident light intensity on the focusing effect is explored. An exact formula is proposed to derive electric field E from electric flux density D in a Kerr-Dispersive medium. Surface plasmon (SPs) modes and Fabry-Perot (F-P) resonances are used to explain the physical origin of the light focusing phenomenon. Focused ion beam milling can be implemented to fabricate the proposed lens. It can find valuable potential applications in integrated optics and for tuning purposes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.9
• /
• pp.1386-1397
• /
• 2009

This study investigates costumes for ball jointed dolls under the theme of Bok-yo(服妖): The Lady in Early-middle Joseon with relic costumes as a reference. The Bok-yo style was spread universally for Joseon women in the $15^{th}-16^{th}$ centuries, but it is an uncommon theme in the area of media and traditional costume for dolls. Bok-yo (curious outfit), consisted of a Dang-jeogori with a golden brocade in the front bottom, manlike Jang-ot, wide Chima, and Jang-ot was dressed between Chima and the Dang-jeogori. To make correct patterns and approvals for idle bodies of female ball-jointed dolls, darts are added in the front vertical line and center back of the golden brocade Dan-jeogori for Joseon ladies. The pattern of the golden brocade Chima is made as a trapezoid shape for the thin waist of a doll, and the length of a deep-greened silk gauze The Jang-ot increased because of the length of the doll's legs. In addition, the kinds of investigated accessories, hair, traditional underwear for dolls are limited. Suggested is a closer cooperation between the investigated costume designers, doll companies, and accessory makers for the future market of ball jointed dolls.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.4
• /
• pp.1-11
• /
• 2023

The purpose of this study was to characterize the upper body shape of men in their 50s and 60s by analyzing direct measurement data. Sixty one direct measurement items were analyzed. Subjects (n = 752) were classified based on 5 factors into 4 body types. In order to acquire accurate upper body shape information by analyzing body type using the 8th Size Korea direct measurement data, body shapes were classified through factor and cluster analysis. As a result of the comparative analysis of the upper body measurements from the 5th to the 8th Size Korea measurement, it was found that waist circumference item tended to increase significantly from the 5th Size Korea measurements. The upper body type of middle aged males were classified using five factors: the trunk obesity factor, the trunk vertical factor, the width of the back shoulder, the vertical factor behind the back, and the length factor of the upper body. Middle-aged men were classified into four body types through cluster analysis. Type 1 is relatively short with big arms, Type 2 has wide shoulders and thin arms, and in Type 3, the upper body is relatively long. Type 4 is the most obese upper body.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.146-165
• /
• 2022

The purpose of this study is to identify differences in the formative characteristics and system of Jobok by comparing the three relics Ui, Sang, and Daedae, which comprised Jeon-Sik's Jobok, with the data in the literature and five excavated Jobok relics, Sin Kyung-yu, Kwon-Woo, Hwasan-Gun, Milchang-Gun, and Lee Ik-jeong, from the 17th and 18th centuries. Jeon-Sik'sJobok was designated as a Gyeongbuk tangible cultural heritage, Sangju JeonSik Jobok and Crafts, in 2021. The three components of Jeon-Sik's Jobok are valuable as historical data since they are the oldest relics confirming colors. Regrettably, the edging fabric of the Ui made of red twill was mostly lost, with only traces remaining. Based on records, it was presumed that the edging fabric was black. It was confirmed that white decorative lines were yet to be used. In Jeon Sik's Sang, only the three front widths and one rear width remain, but the shape of the four rear widths can be inferred, and the creases were held only at the waist. Eighteenth-century Sang was connected at intervals at the end of the waist. Seventeenth-century Sang was connected with a slight overlapping of the rear Sang below the front Sang; therefore, it is assumed that Jeon Sik's Sang was also connected by overlapping the rear by more or less than 5cm below the front. After Hwasan-gun, the Sang was first made using black lines, then white lines were inserted, and, finally, it was pleated from the waist to the hem. The Daedae made the Yo and the Sin by folding the corners to form a 冂 shape with a single long band. The white Ju(紬) and the green yumunsa were used for the Daedae and the edges. This matches the color of the Daedae seen in the Jobok portraits of Milchang-gun, Lee Ik-jeong, and Jeong Hwi-ryang from the 18th century. In the 17th century, the Daedae made the Yo and the Sin by folding a long band like the Daedae of Jeon-Sik. After the 18th century, the Yo and the Sin were made separately and connected. To tie the Daedae to the waist, thin straps were attached at both ends. The relics of Jeon-Sik can be evaluated as reflecting the 17th-century Jobok system in terms of color and shape. Furthermore, it can be said that they are important historical data complementing the insufficient or inaccurate records of the Gukjoolyeui-seolye and Gyeongguk-daejeon.

• Journal of Fashion Business
• /
• v.11 no.4
• /
• pp.135-151
• /
• 2007

This study is human body measurement of 200 adult males in their 20s by both direct and indirect methods in order to reveal the representative male upper body types. Composition factors of body types were classified while the combination of direct-indirect measurement values was chosen. The following are the findings: 1) The analysis of direct-indirect measurement statistics showed the following results: 173.80cm (height), 69.87kg (weight), 95.58cm (chest girth), $24.67^{\circ}$ (right shoulder angle), and $9.34^{\circ}$ (shoulder width angle). 2) The factor analysis of the body types by direct measurement produced 5 factors: 1 (front length of upper body), 2 (front length of upper body), 3 (back length of upper body), 4 (circumference of upper body), and 5 (shoulders length). These factors accounted for 90.08%. Also, the cluster analysis of factor scores led to 3 types: 1 (33%, short, comparatively wide shoulders and full in the hips), 2 (25.1%, well-developed upper body in tall, inversed triangle), 3 (41%, average height, short upper body). 3) The body-type factor analysis by indirect measurement resulted in 6 factors with the explanation of 83.24%: 1 (rear upper bady thickness), 2 (front upper body width), 3 (front chest thickness), 4 (left-right shoulder angle), 5 (front width of protrusion distance in chest and shoulders), and 6 (neck's front-rear side angle).In addition, the cluster analysis of factor scores brought about 4 types: 1 (15%, well-developed front chest, beardless waist), 2 (23.5%, flat chest, with shoulder, drooping shoulders, strait neck), 3 (39%, with shoulder, curved back), and 4 (22.5%, narrow and thin, curved waist). 4) Among the 118 subjects (75%), 58 subjects commonly appearing in indirect measurement values group and direct measurement values group were chosen the representative body type group according to asterisk indexes. They had the highest frequency in direct type 3 and indirect type 3, whose combination represented the physical characteristics of the representative body types.

• Journal of Preventive Medicine and Public Health
• /
• v.33 no.2
• /
• pp.193-198
• /
• 2000

Objective : To evaluate the relationship between serum leptin concentration and obesity indices in a rural population. Methods : Two hundred and nine subjects were randomly sampled from 1036 residents who had participated in the survey. Their obesity indices were measured by bioelectrical impedance analysis and anthropometry. Serum leptin concentrations were measured by immunoradiometric assay. Results : Serum leptin concentrations were positively correlated with body mass index, percent of body fat, fat mass, waist circumference, and hip circumference. Serum leptin concentrations were higher in obese or overweighted subjects than normal or thin subjects(8.5[0.9-31.4] compared with $2.7[0.1-12.0]{\mu}g/L$, p<0.01). Serum leptin concentrations were higher in women than men, even after an adjustment to body mass index$(\beta=4.183,\;p<0.01)$. According to body composition, serum leptin concentrations were more related with waist circumference in men, hip circumference in women. Conclusions : Serum leptin concentrations are positively correlated with obesity indices. Serum leptin concentrations are higher in obese subjects, in women, and more related with peripheral obesity. These findings support the hypothesis that human obesity is associated with leptin-resistance rather than leptin-deficiency.

• Journal of the Korean Home Economics Association
• /
• v.37 no.7
• /
• pp.29-43
• /
• 1999

The purpose of this study was to develop disposable diapers for the elderly in need by experimenting with wearing disposable diapers and analyzing the properties of materials of these diapers. The diapers were of two different types: one was a panty type for the elderly who were bed ridden, and the other was a pad type for the elderly who had incontinence. The subjects for the wearing test of the panty type were forty who were bed ridden, and there were forty subjects for the wearing test of the pad type who had incontinence. The disposable diapers for these experiments were chosen from those already found in the market place. Four panty types and three pad types were selected. From these experiments for the disposable diapers, the first prototypes were developed, and the second prototypes were proposed by experimenting with the first prototypes. The first panty prototype was designed to improve absorbing power, and we added waist rubber bands to prevent evacuation from back leaking and a frontal tape to prevent waistline film from tearing. The first pad prototype was designed to improve absorbing power also, and we added side rubber bands to prevent the side leaking and an adhesive tape on the fore part of the bottom to prevent the diapers from moving, and made the outline of the back area curved and thin to help hide the diaper from detection thus making the wearer feel better. From these test cases and analyzing the properties of materials with the first prototypes, we gained some success, but several points on further improvements were proposed to refine the final prototypes. The second panty prototype we proposed was to make 1he length longer, especially in the crotch area to prevent excess leaking and to fit the body more snugly. Also, the second pad prototype was proposed to reduce the total thickness of the diaper, and to improve the feeling and appearance.