• Structural Engineering and Mechanics
• /
• v.13 no.4
• /
• pp.387-410
• /
• 2002

Formulation of an 8 nodes assumed strain shell element is presented for the analysis of shells. The stiffness matrix based on the Mindlin-Reissner theory is analytically integrated through the thickness. The element is free of membrane and shear locking behavior by using the assumed strain method such that the element performs very well in modeling of thin shell structures. The material is assumed to be isotropic and laminated composite. The element has six degrees of freedom per node and can model the stiffened plates and shells. A great number of numerical testing carried out for the validation of present 8 node shell element are in good agreement with references.

• Journal of the Korean Vacuum Society
• /
• v.4 no.S2
• /
• pp.30-33
• /
• 1995

By using X-ray double crystal diffraction technique the multilayer structure composed of glass membrane, platinum film and $\alpha Al_2O_3$ substrate has been studied. It is found the stress is produced in the film by thermal mismatch within multilayer materials. The measuring results of thin film platinum resistors show that the stress were induce resistance change of device and different stress status will produce add resistance in different direction. Selecting proper glass material can make opposite stress in Pt film and opposite add resistance due to thermal mismatch. The reliability of Pt resistor has been improved with method of this stress compensation.

• The Korean Journal of Cytopathology
• /
• v.2 no.2
• /
• pp.142-147
• /
• 1991

Diagnosis of a thymic carcinoid was made on transthoracic fine needle aspiration in a 36-year old woman who had an anterior mediastinal mass on chest X-ray and CT scan. The aspiration smears showed numerous anastomosing ribbons and cords of small round tumor cells. The tumor cells had slightly eccentric nuclei and some granular cytoplasm. The small and uniform nuclei of the tumor cells had finely granular chromatin and thin nuclear membrane. The cytologic diagnosis of a carcinoid was confirmed on histopathologic, immunohistochemical, and electromicroscopic examination of surgical specimen.

• Applied Microscopy
• /
• v.1 no.1
• /
• pp.27-34
• /
• 1969

The compound eyes of the adult Drosophila melanogaster were. fixed in 1.25 per cent glutaraldehyde and 1 per cent osmium tetroxide buffered with sodium cacodylate at pH 7.2. Double fixed specimens were dehydrated using the alcohol series and embedded in Epon 812. They were sectioned with porter blum and JUM 5B ultra-microtome and then stained with lead hydrooxide and uranyl acetate. All thin sections were examined with Hitachi HS-7 or HU-11 electron microscope. The rhabdomere of the compound eye is composed of numerous microvilli packed, arranged, and projected from inner edge of each retinal cell. Each microvillus consisted of a centrum, about $82{\AA}$ in diameter, surrounded by the substances, about $105{\AA}$ in width, which were bounded with double membrane about $44{\AA}$ in thickness. In each inner edge of the microvilli, there was a cylinder, about $175{\AA}$ in diameter, in parallel with retinal cells, which contained a cylindrical axis about $583{\AA}$ in diameter. The surface of the outer edges .of .the microvilli was bounded with reticullar substances about $500{\AA}$ in thickness.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.9
• /
• pp.913-919
• /
• 1991

For an elementary study of the molecular electronic devices, in this study, N-alkylpyridinium(TCNQ) (1:1) and (1:2) complexed were synthesized. These complexes were verified by the UV, IR and the elemental analysis. Deposition of the LB films were verified by the reciprocal capacitance, UV absorbance and decresement area of Langmuir fims as functions of number of layers. The internal voltage of LB membrane devices fabricated with Y-type resides in 100-300mV. Finally, it seemed that self-polarization of LB membrance generates internal voltage.

• Journal of the Korean Electrochemical Society
• /
• v.16 no.4
• /
• pp.204-210
• /
• 2013

Thin pore-filled cation and anion-exchange membranes (PFCEM and PFAEMs, $t_m=25-30{\mu}m$) were prepared using a porous polymeric substrate for efficient all-vanadium redox flow battery (VRB). The electrochemical and charge-discharge performances of the membranes have been systematically investigated and compared with those of commercially available ion-exchange membranes. The pore-filled membranes were shown to have higher permselectivity as well as lower electrical resistances than those of the commercial membranes. In addition, the VRBs employing the pore-filled membranes exhibited the respectable charge-discharge performances, showing the energy efficiencies (EE) of 82.4% and 84.9% for the PFCEM and PFAEM, respectively (cf. EE = 87.2% for Nafion 1135). The results demonstrated that the pore-filled ion-exchange membranes could be successfully used in VRBs as an efficient separator by replacing expensive Nafion membrane.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.3
• /
• pp.291-294
• /
• 2003

A highly interferent-resistive membrane, poly-5-amino-1-naphthol (poly-5A1N), underlied beneath enzymeembedded poly-1,3-phenylendiamine (poly-m-PD) network for miniturized continuous monitoring glucose sensors. The enzyme layer was prepared from a mixed solution of glucose oxidase (GOx) and m-PD monomer by simple electrolysis. The mass change of poly-5A1N was monitored by electrochemical quartz crystal microbalance (EQCM) in situ and the corresponding thickness was measured. Successive electropolymerization of poly-5A1N and poly-m-PD create a several tens nm-thick bilayer showing excellent selectivity for $H_2O_2$ and low activity loss of immobilized enzymes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.385-386
• /
• 2008

This paper reports the design of the ultra low power consumption microhotplates for high temperatures. The microhotplates consisting of a platinum-based heating element on AlN/poly 3C-SiC layers were designed. The microhotplate is a $600\times600{\mu}m^2$ square shaped membrane made of $1{\mu}m$ thick ploy 3C-SiC suspended by four legs. The microhotplate was compared with $Si_3N_4/SiO_2/Si_3N_4$(NON) structure microhotplate by COMSOL simulation system. Thermal uniformity, power consumption and thermal characterizations of microhotplates based on 3C-SiC thin film are better than microhotplates with NON structure.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.173-176
• /
• 2000

Finite element model based on the Naghdi's shell theory in the general tensor-based form is formulated in the present study. Partial mixed variational functional for assumed strain is formulated in order to avoid the severe locking troubles known as transverse shear and membrane locking. The proposed assumed strain element in general tensor Naghdi's shell model provides very accurate solutions for thin shells in benchmark problems. In additions, linear elastic constitutive equations are given in the general curvilinear coordinate system including anisotropic layered structures. Thus laminated composited shell structures are easily analyzed in the present formulation.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.1177-1182
• /
• 2012

The corrosion resistance of 316L stainless steel coated with NiO-YSZ (Ni added yttria stabilized zirconia) was examined in a proton exchange membrane fuel cell (PEMFC) environment. The NiO-YSZ coating was carried out using a sol-gel dip coating method, and the corrosion resistance and interfacial contact resistance (ICR) were determined by the composition and morphology of the NiO-YSZ film. The corrosion resistance increased with increasing Ni content in the NiO-YSZ film, but rapid corrosion was observed when the YSZ film contained more than 15 wt % Ni due to surface cracks. The polarization resistance was improved by several orders of magnitude when 316L stainless steel was coated with a 15 wt % NiO-YSZ film compared to bare 316L. The ICR of the NiO-YSZ film was decreased to that of bare 316L when the YSZ film contained 25 wt % NiO, suggesting the possible application of NiO-YSZ coated stainless steel for a bipolar plate.