• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.874-876
• /
• 2003

Blue light-emitting polyfluorene derivatives, poly[9,9-bis(4'-n-octyloxyphenyl) fluorene] (PBOPF), poly[9,9-bis(2'-ethylhexyl)]fluorene (PBEHF) and copolymers of PBOPF and PBEHF were synthesized through Ni(0) mediated polymerization and their light-emitting properties were investigated. The PBEHF thin film showed significant excimer band in PL spectra after thermal annealing at 100 $^{\circ}C$ for 2h. But no significant excimer emission was observed in the PL spectra of the PBOPF and the copolymers even after thermal annealing suggesting that BOPF unit effectively suppressed the excimer emission.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.8
• /
• pp.864-869
• /
• 2013

As the size of mechanical components decreases, capillary forces and surface tension become increasingly significant. A major problem in maintaining high reliability of these small components is that of large frictional forces due to capillary action and surface tension. Unlike the situation with macro-scale systems, liquid lubrication cannot be used to reduce friction of micro-scale components because of the excessive capillary and drag forces. In this work, the feasibility of using evaporation to coat a thin film of organic lubricant on a solid surface was investigated with the aim of reducing friction. Petroleum and silicone oils were used as lubricants to coat a silicon substrate. It was found that friction could be significantly reduced and, furthermore, that the effectiveness of this method was strongly dependent on the coating conditions.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.122-129
• /
• 1995

The most important feature of a-Si TFT is dense localized states such as dangling bonds which exist in tis bandgap. Electrons trapped by localized states dominate the potential distribution in the active a-Si region ,and influence the performance of a-Si TFT. In this paper, we describe the electrical characteristics of a-Si TFT with respect to trap distribution within bandgap, electron mobility and interface states using 2-Dimensional device simulator and compare the result of simulation with measurements. Using the mixed-mode simulator, we can predict the potential variation of pixel which causes residual image problem during the turn-off of a-Si TFT driving circuit. Therefore it is possible to consider trade-off between potential variation of pixel and turn-on current of a-Si TFT for the optimized driving circuit.

• Korean Journal of Materials Research
• /
• v.17 no.7
• /
• pp.352-357
• /
• 2007

Since a pattern defects "repair" system using a diode pumped solid state laser for Flat Panel Display (FPD) was suggested, a lot of laser systems have been explored and developed for mass-production microfabrication process. A maskless lithography system using 405 nm violet laser and Digital Micromirror Device (DMD) has been developed for PDP and Liquid Crystal Display (LCD) Thin Film Transistor (TFT) photolithography process. In addition, a "Laser Direct Patterning" system for Indium Tin Oxide (ITO) for Plasma Display Panel(PDP) has been evaluated one of the best successful examples for laser application system which is applied for mass-production lines. The "heat" and "solvent" free laser microfabrications process will be widely used because the next-generation flat panel displays, Flexible Display and Organic Light Emitting Diode (OLED) should use plastic substrates and organic materials which are very difficult to process using traditional fabrication methods.

• Information Display
• /
• v.7 no.3
• /
• pp.4-17
• /
• 2006

차세대 디스플레이로서, 특히 휴대기기를 위한 플레깃블 디스플레이에 대한 관심이 증가되고 있다. 지난 몇 년간 계속적으로 연구가 이루어져 왔음에도 불구하고, 플렉시블 디스플레이는 아직 하나의 '제품'으로서 시장에 진입하지 못하고 있다. 플렉시블 디스플레이는 플라스틱이나 메탈 호일, 플렉시블 유리와 같은 플렉시블 기판이 쓰이는데, 이것은 가벼우면서 얇고 강하며 제조 측면에서 높은 생산성을 가질뿐만 아니라 착용이 가능할 정도의 자유로운 디자인이 가능하다는 장점을 가지고 있다. 이러한 많은 장점으로 인해 플렉시블 디스플레이의 연구와 개발이 빠르게 진행되고 있다. 지난 몇 년 동안 개발된 전기영동(electrophoretic), 유기전계발광(OLED, organic light-emitting diode), 액정(liquid-crystal)과 관련된 플렉시블 디스플레이에 대해 성능 등을 알아보고, 플렉시블 디스플레이용으로 개발된 플라스틱 기판과 그 위에 형성된 유기박막트랜지스터(OTFTs, organic thin film transistors)의 특성을 분석한다. 그리고 oTFTs의 성능과 제작공정의 이해를 위해 self organized process에 대해 설명하고 마지막으로 중요 연구 과제를 제시한다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.7
• /
• pp.1295-1297
• /
• 2008

Large-sized flat-panel displays are widely used for PC monitors and TV displays. In this paper, frequency domain pre-filter algorithms are presented for detection of defects in large-sized Thin Film Transistor-Liquid Crystal Display(TFT-LCD) panel surfaces. Frequency analysis with 1-D, 2-D FFT methods for extract the periodic patterns of lattice structures in TFT-LCD is performed. To remove this patterns, frequency domain band-stop filters were used for eliminating specific frequency components. In order to acquire only defected images, 2-D inverse FFT methods to inverse transform of frequency domain images were used.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.6
• /
• pp.440-444
• /
• 2016

Owing to the introduction of various IT devices with emphasis on portability and design, the TFT (thin film transistor liquid crystal display) panel applied to IT devices has the same shape as the product, and the portability requirement of IT devices has resulted in a need for panels with higher rigidity. In this study, the effect of grinding conditions such as the feed rate and edge speed of edge grinding on the surface roughness and chipping of the machined surface is investigated using a metal bond wheel. During edge grinding of alkari-free glass, weak mechanical property of glass results in big chipping owing to generation of tensile stress at the end of grining operation. The results of this study show that the grinding characteristics of alkali-free glass are obtained and meet industry requirements.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.11-12
• /
• 2000

An 18.1" Thin Film Transistor Liquid Crystal Display (TFT LCD) monitor adopting high brightness In Plane Switching (IPS) technology was realized. While conventional IPS structure used a Chromium (Cr) and Molybdenum (Mo) for a drain electrode, Indium Tin Oxide (ITO) was proposed and verified in this paper. Black sticky micropeal spacers were introduced for the reduction of light scattering phenomena, which was observed at dark room with the conventional micropeal spacers. With the proposed method, more than 10 % aperture ratio was increased and the excellent image quality was obtained.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.71-72
• /
• 2000

The design of large area thin film transistor liquid crystal displays (TFT-LCDs) requires consideration of cross-talks between the data lines and pixel electrodes. These limits are imposed by the mutual coupling capacitances present in a pixel. The mutual coupling capacitance causes a pixel voltage error. In this study, semi-empirical model, which is adopted from VLSI interconnection capacitance calculations, is used to calculate mutual coupling capacitances. With calculated mutual coupling capacitances and arbitrary given image pattern, the root mean square (RMS) voltage of pixel is calculated to see vertical cross-talk from the first to the last column. The information obtained this study can be utilized to design the larger area and finer image quality panel.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.9
• /
• pp.908-912
• /
• 1991

YBaCuO oxide superconductor-shows superconductive at Liquid Nitrogen temperature-must be preparate wire or thin film form for utility. The wiring is possible with heat treatment after appropriate mixture of polymeric binder and YBaCuO oxide superconductor has fabricated. This study, analyzed the characteristics of fabricated superconductor and extruded wire after application to each of a mixed at different rate in the superconductor and compared with an original pure sample. From the result, we knew that the binder component influences superconducting characteristics. The best condition for superconductivity occurred at a criticla temperature of 86.4K (8:2 rate) and at a critical current density of 100.27A/cmy with a binder packing ratio of about 20~25 percent.