• The Journal of the Petrological Society of Korea
• /
• v.8 no.3
• /
• pp.183-202
• /
• 1999

The Sobeaksan Gneiss Complex in the Punggi area is composed of mainly mignatitic gneiss, porphyroblastic gneiss, garnet granitic gneiss and biotitie granitic gneiss. Metamorphic grade increase gradually from the amphibolite facies of northwestern part to the granulite facies of southwestern part in the study area. Representative mineral assemblage in the amphibolite facies is biotite-muscovite-K-feldspar-plagioclase$\pm$garnet$\pm$epidote, needle shape or fibrous sillimanite occur in transitional zone from the amphibolite facies to the granulite facies. In the granulite facies, the garnet-Opx granulite shows garnet-orthopyroxene-biotite-plagioclase, the metabasite shows clinopyroxene-plagioclase$\pm$hornblende$\pm$orthopyroxene$\pm$garnet and the migmatitic gneiss shows garnet-biotite-sillimanite-cordierite$\pm$spinel as representative mineral assemblage. Retrograde metamorphism after the granulite facies metamorphism made corindum and andalusite in the migmatitic gneiss and the thin layer garnet between clinopyroxene and plagioclase in the metabasites. The peak P-T conditions of the migmatitic gneiss and the garnet-Opx granulite are $916^{\circ}C$/6.6 kb and $826^{\circ}C$/6.3 kb, respectively. The P-T condition of biotite and plagioclase inclusion, which indicates the progressive condition of the granulie facies, within garnet is $866^{\circ}C$/7.5 kb and that of rim composition of garnet and biotite is $726^{\circ}C$/4.6 kb, which infer the clockwise P-T path of the granulite facies metamorphism. The temperatures caculated by the rim composition of garnet and biotite in the migmatitic gneiss and garnet granitic gneiss have a wide range of $556-741^{\circ}C$, which indicate that the retrograde metamorphism after the granulite facies metamorphism has effected differently. It is difficult to determine the P-T condition of the biotite granitic gneiss because less occurrence and higher spessartine content of garnet. The P-T condition of the thin layered garnet between clinopytoxene and plagioclase in the metabasite is $635-707^{\circ}C$/4.1-5.3 kb. This texture indicates the isobaric cooling(IBC) condition of the retrogressive metamorphism. As a result, the metamorphic evolution of the Punggi area has undergone the isobaric cooling after the granulite facies metamorphism which has undergone the clockwise P-T path.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.61-66
• /
• 2012

Chemical Mechanical Planarization (CMP) is a polishing process used in the microelectronic fabrication industries to achieve a globally planar wafer surface for the manufacturing of integrated circuits. Pad conditioning plays an important role in the CMP process to maintain a material removal rate (MRR) and its uniformity. For metal CMP process, highly acidic slurry containing strong oxidizer is being used. It would affect the conditioner surface which normally made of metal such as Nickel and its alloy. If conditioner surface is corroded, diamonds on the conditioner surface would be fallen out from the surface. Because of this phenomenon, not only life time of conditioners is decreased, but also more scratches are generated. To protect the conditioners from corrosion, thin organic film deposition on the metal surface is suggested without requiring current conditioner manufacturing process. To prepare the anti-corrosion film on metal conditioner surface, vapor SAM (self-assembled monolayer) and FC (Fluorocarbon) -CVD (SRN-504, Sorona, Korea) films were prepared on both nickel and nickel alloy surfaces. Vapor SAM method was used for SAM deposition using both Dodecanethiol (DT) and Perfluoroctyltrichloro silane (FOTS). FC films were prepared in different thickness of 10 nm, 50 nm and 100 nm on conditioner surfaces. Electrochemical analysis such as potentiodynamic polarization and impedance, and contact angle measurements were carried out to evaluate the coating characteristics. Impedance data was analyzed by an electrical equivalent circuit model. The observed contact angle is higher than 90o after thin film deposition, which confirms that the coatings deposited on the surfaces are densely packed. The results of potentiodynamic polarization and the impedance show that modified surfaces have better performance than bare metal surfaces which could be applied to increase the life time and reliability of conditioner during W CMP.

• Economic and Environmental Geology
• /
• v.45 no.2
• /
• pp.71-78
• /
• 2012

Illite-smectite mixed layers (I-S) occurring authigenically in diagenetic and hydrothermal environments reacts toward more illite-rich phases as temperature and potassium ion concentration increase. For that reason, I-S is often used as geothermometry and/or geochronometry at the field of hydrocarbons or ore minerals exploration. Generally, I-S shows X-ray powder diffraction (XRD) patterns of ultra-thin lamellar structures, which consist of restricted numbers of sillicate layers (normally, 5 ~ 15 layers) stacked in parallel to a-b planes. This ultra-thinness is known to decrease I-S expandability (%S) rather than theoretically expected one (short-stacking effect). We attempt here to quantify the short stacking effect of I-S using the difference of two types of expandability: one type is a maximum expandability ($%S_{Max}$) of infinite stacks of fundamental particles (physically inseparable smallest units), and the other type is an expandability of finite particle stacks normally measured using X-ray powder diffraction (XRD) ($%S_{XRD}$). Eleven I-S samples from the Geumseongsan volcanic complex, Uiseong, Gyeongbuk, have been analyzed for measuring $%S_{XRD}$ and average coherent scattering thickness (CST) after size separation under 1 ${\mu}m$. Average fundamental particle thickness ($N_f$) and $%S_{Max}$ have been determined from $%S_{XRD}$ and CST using inter-parameter relationships of I-S layer structures. The discrepancy between $%S_{Max}$ and $%S_{XRD}$ (${\Delta}%S$) suggests that the maximum short-stacking effect happens approximately at 20 $%S_{XRD}$, of which point represents I-S layer structures consisting of ca. average 3-layered fundamental particles ($N_f{\approx}3$). As a result of inferring the $%S_{XRD}$ range of each Reichweite using the $%S_{XRD}$ vs. $N_f$ diagram of Kang et al. (2002), we can confirms that the fundamental particle thickness is a determinant factor for I-S Reichweite, and also that the short-stacking effect shifts the $%S_{XRD}$ range of each Reichweite toward smaller $%S_{XRD}$ values than those that can be theoretically prospected using junction probability.

• Parasites, Hosts and Diseases
• /
• v.27 no.4
• /
• pp.261-270
• /
• 1989

The present study is intended to observe the chronologic changes of experimental sparganosis by histopathological observation and detection of circulating anti-sparganum IgG antibody using ELISA. Each of 25 mice was infected with aye spargana, and they were examined after 1, 2, 4, 10 weeks or 6 months from infection. The followings are summarized results. - 1. The plerocercoids were detected in the subcutaneous tissue of the trunk, neck or axilla, but a few often extended into the skeletal muscle. The recovery rates were 72% at the first week, 80% at the second week, 95% at the fourth week, 92% at the tenth week and 100% at .the sixth month. The larvae grew slowly in both length and weight until 6 months. 2. Histopathologically, most of the larvae were observed alive in the soft tissue or skeletal muscle. Numerous eosinophils, neutrophils, Iymphocytes and plasma cells were infiltrated focally around the worms by the second week, but they surrounded the worms to form a layer of inflammatory reaction after 4 weeks of infection. Also histiocytes and fibroblasts began to appear around the inflammatory cells at 4 weeks. After 10 weeks, the worms encircled by a thin fibrous layer were found. After 6 months, the worms were surrounded by either fibrous tissue or active inflammatory cells. The inflammation looked more severe in the tracks left by the worms, rather than around the worms. 3, The level of anti-sparganum IgG antibody in the serum showed an increase by the fourth week, and a rapid and continuous increase was observed thereafter by the tenth week after infection. The high level of the IgG antibody was maintained up to 6 months forming a plateau curve. The present results suggest that the tissue reaction and antibody production in subcutaneous sparganosis become distinctive by the fourth week after infection.

• Applied Microscopy
• /
• v.35 no.1
• /
• pp.41-56
• /
• 2005

Present study was performed to observe the tegumental ultrastructures by the developmental stages which derived from the experimental life cycle of Spirometra erinacei in laboratory conditions. In SEM view, coracidium was spherical in shape with numerous cilia, and its surface was covered with long cilia, tuberclelike projections with millet-like processes, and small holes. The body surface of procercoid was covered with numerous pointed microtriches except that of frontal pit with stout spine-like ones. However that of cercomer was covered with somewhat sparse blunt-tiped microtriches. Plerocercoids of 3 days old resembled the mature procercoid in shape, and their frontal pits were covered with numerous stout spine-like microtriches. However frontal pit and body surface in more than 5 days old ones were covered with conoid microtriches. On the surface of adult scolex, hairly long filamentous and stout short microtriches were mixedly distributed. Filamentous microtriches were more densely distributed in the anterior portion than in the posterior of scolex. The neck and immature proglottid were covered with only stout short conoid microtriches. In TEM view of coracidia, embryophore and oncosphere were obviously distinguished. The embryophore contained numerous glycogen particles, mitochondria and lipid granules. The cilia on the surface of embryophore rooted in the coracidial sheath, and consisted of 9 pairs of microtubules and 2 core complex. The oncosphere was covered with a thin and unarmed tegument, and was multi-nucleated. The protoplasmic layer of procercoid and plerocercoid consisted of disc-shaped bodies, vacuoles and mitochondria. Their tegumental cells commonly retained a nucleus, granular endoplasmic reticulums and secretory granules. The protoplasmic layer of plerocercoid was more compacted than that of procercoid. From the above results, it was confirmed that the tegumental ultrastructures are something different according to the developmental stages of S. erinacei.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.14-14
• /
• 2011

W (tungsten)-alloys will be the most promising plasma facing armor materials in highly loaded plasma interactive components of the next step fusion reactors due to its high melting point, high sputtering resistance and low deuterium/tritium retention. The bonding technology of tungsten to Cu alloy was one of the key issues. In this paper, W/CuCrZr diffusion bonding has been performed successfully by inserting pure metal interlay. The joint microstructure, interfacial elements migration and phase composition were analyzed by SEM, EDS, XRD, and the joint shear strength and micro-hardness were investigated. The mock-ups were fabricated successfully with diffusion bonding and the cladding technology respectively, and the high heat flux test and thermal fatigue test were carried out under actively cooling condition. When Ni foil was used for the bonding of tungsten to CuCrZr, two reaction layers, Ni4W and Ni(W) layer, appeared between the tungsten and Ni interlayer with the optimized condition. Even though Ni4W is hard and brittle, and the strength of the joint was oppositely increased (217 MPa) due primarily to extremely small thicknesses (2~3 ${\mu}m$). When Ti foil was selected as the interlayer, the Ti foil diffused quickly with Cu and was transformed into liquid phase at $1,000^{\circ}C$. Almost all of the liquid was extruded out of the interface zone under bonding pressure, and an extremely thin residual layer (1~2 ${\mu}m$) of the liquid phase was retained between the tungsten and CuCrZr, which shear strength exceeded 160 MPa. When Ni/Ti/Ni multiple interlayers were used for bonding of tungsten to CuCrZr, a large number of intermetallic compound ($Ni_4W/NiTi_2/NiTi/Ni_3T$) were formed for the interdiffusion among W, Ni and Ti. Therefore, the shear strength of the joint was low and just about 85 MPa. The residual stresses in the clad samples with flat, arc, rectangle and trapezoid interface were estimated by Finite Element Analysis. The simulation results show that the flat clad sample was subjected maximum residual stress at the edge of the interface, which could be cracked at the edge and propagated along the interface. As for the rectangle and trapezoid interface, the residual stresses of the interface were lower than that of the flat interface, and the interface of the arc clad sample have lowest residual stress and all of the residual stress with arc interface were divided into different grooved zones, so the probabilities of cracking and propagation were lower than other interfaces. The residual stresses of the mock-ups under high heat flux of 10 $MW/m^2$ were estimated by Finite Element Analysis. The tungsten of the flat interfaces was subjected to tensile stresses (positive $S_x$), and the CuCrZr was subjected to compressive stresses (negative $S_x$). If the interface have a little microcrack, the tungsten of joint was more liable to propagate than the CuCrZr due to the brittle of the tungsten. However, when the flat interface was substituted by arc interfaces, the periodical residual stresses in the joining region were either released or formed a stress field prohibiting the growth or nucleation of the interfacial cracks. Thermal fatigue tests were performed on the mock-ups of flat and arc interface under the heat flux of 10 $MW/m^2$ with the cooling water velocity of 10 m/s. After thermal cycle experiments, a large number of microcracks appeared at the tungsten substrate due to large radial tensile stress on the flat mock-up. The defects would largely affect the heat transfer capability and the structure reliability of the mock-up. As for the arc mock-up, even though some microcracks were found at the interface of the regions, all microcracks with arc interface were divided into different arc-grooved zones, so the propagation of microcracks is difficult.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.1-33
• /
• 1997

The objective of this study was to analyze the in vitro and in vivo corrosion products of low and high copper amalgams. The four different types of amalgam alloy used in this study were Fine cut, Caulk spherical, Dispersalloy, and Tytin. After each amalgam alloy and Hg were triturated according to the directions of the manufacturer by means of the mechanical amalgamator(Amalgam mixer. Shinhung Co. Korea), the triturated mass was inserted into a cylindrical metal mold which was 12mm in diameter and 10mm in height. The mass was condensed by 150Kg/cm compressive force. The specimen was removed from the mold and aged at room temperature for about seven days. The standard surface preparation was routinely carried out by emery paper polishing under running water. In vitro amalgam specimens were potentiostatically polarized ten times in a normal saline solution at $37^{\circ}C$(potentiostat : HA-301. Hukuto Denko Corp. Japan). Each specimen was subjected to anodic polarization scan within the potential range -1700mV to+400mV(SCE). After corrosion tests, anodic polarization curves and corrosion potentials were obtained. The amount of component elements dissolved from amalgams into solution was measured three times by ICP AES(Inductive Coupled Plasma Atomic Emission Spectrometry: Plasma 40. Perkim Elmer Co. U.S.A.). The four different types of amalgam were filled in occlusal and buccal class I cavities of four human 3rd molars. After about five years the restorations were carefully removed after tooth extraction to preserve the structural details including the deteriorated margins. The occlusal surface, amalgam-tooth interface and the fractured surface of in vivo amalgam corrosion products were analyzed. In vivo and in vitro amalgam specimens were examined and analyzed metallographically by SEM(Scanning Electron Microscope: JSM 840. Jeol Co. Japan) and EDAX(Energy Dispersive Micro X-ray Analyser: JSM 840. Jeol Co. Japan). 1. The following results are obtained from in vitro corrosion tests. 1) Corrosion potentials of all amalgams became more noble after ten times passing through the in vitro corrosion test compared to first time. 2) After times through the test, released Cu concentration in saline solution was almost equal but highest in Fine cut. Ag and Hg ion concentration was highest in Caulk spherical and Sn was highest in Dispersalloy. 3) Analyses of surface corrosion products in vitro reveal the following results. a)The corroded surface of Caulk spherical has Na-Sn-Cl containing clusters of $5{\mu}m$ needle-like crystals and oval shapes of Sn-Cl phase, polyhedral Sn oxide phase. b)In Fine cut, there appeared to be a large Sn containing phase, surrounded by many Cu-Sn phases of $1{\mu}m$ granular shapes. c)Dispersalloy was covered by a thick reticular layer which contained Zn-Cl phase. d)In Tytin, a very thin, corroded layer had formed with irregularly growing Sn-Cl phases that looked like a stack of plates. 2. The following results are obtained by an analysis of in vivo amalgam corrosion products. 1) Occlusal surfaces of all amalgams were covered by thick amorphous layers containing Ca-P elements which were abraded by occlusal force. 2) In tooth-amalgam interface, Ca-P containing products were examined in all amalgams but were most clearly seen in low copper amalgams. 3) Sn oxide appeared as a polyhedral shape in internal space in Caulk spherical and Fine cut. 4) Apical pyramidal shaped Sn oxide and curved plate-like Sn-Cl phases resulted in Dispersalloy. 5) In Tytin, Sn oxide and Sn hydroxide were not seen but polyhedral Ag-Hg phase crystal appeared in internal space which assumed a ${\beta}_l$ phase.

• Applied Microscopy
• /
• v.31 no.1
• /
• pp.19-35
• /
• 2001

Outlines for plasma $estradiol-17\beta$, components, electrophoretic patterns, and ultrastructural changes were obtained in female rainbow trout (Oncorhynchus mykiss) during the seasonal reproductive cycles. Plasma $estradiol-17\beta$ under the natural conditions, exhibited distinct seasonal variation, peaking very late in vitellogenic season during September, decreasing gradually the halt of spawning in December, and ultimately falling during the early stages of seasonal ovarian recrudescence in February and March. This change in $estradiol-17\beta$ appeared to stimulate vitellogenin production as evidenced by increases in plasma calcium, phosphorus, glucose, albumin and total protein levels. The electrophoretic patterns of late maturing or spawning oocytes were stained more intensively than those of late perinucleolus oocytes (molecular weights of approximately 70,000 and 200,000). Two protein bands were found in the SDS-PAGE separation, coincident with the $estradiol-17\beta$ hormone peak. Gonadosomatic indices (GSI) significantly increased from October to January, and showed the highest peak in January, coinciding with the numerically abrupt increase of ripe ova in female. A positive correlation (r=0.701, p<0.01) was established between plasma $estradiol-17\beta$ levels and the gonadosomatic index during the prespawning. The highest level of hepatosomatic index (HSI) observed in December. During the breeding season (December), the gonadotropes were large and filled with GTH-containing inclusions such as granules and globules. The vitellogenic phase began as late perinurleolus oocytes became transformed into early maturing oocytes through the accumulation of yolk, and oocytes reached the late maturing stages as the ooplasm was completely packed with yolk. Marked ultrastructural changed in the granulosa cells during nuclear migration involve the dilation of the rough endoplasmic reticulum and the appearance of the rod-shaped mitochondria with tubular cristae. Microvilli (finger-like projections), from the zona radiata and from the oocyte grew, and made contact with each other in the pore canals of the zona radials during vitellogenesis, but were withdrawn as the zona radiata became more compact and devoid of pore canals during oocyte maturation. The zona radiata grew to a tripartite structure such as an outer thin homogeneous layer, and two inner thick helicoidal layers (zona radials interna and zona radiata externa). Under the normal conditions, the ovarian follicle influenced the histological development and periodical secretion of the hormones , sufficient for a oogenesis and gonadal steroid production.

• The Korean Journal of Zoology
• /
• v.16 no.2
• /
• pp.79-96
• /
• 1973

In order to elucidate the effects of copper on Corassius carassius, the following were studied: 1) lactate dehydrogenase isozyme patterns by cellulose acetate electrophoresis, 2) LDH activity and copper effect on LDH enzyme system y spectrophotometry, 3) esterase isozyme patterns by agar thin layer electrophoresis, 4) hemoglobin patterns by starch gel electrophoresis, and 5) histological study. 1. There were two bands of LDH isozymes (LDH-3 and LDH-5) in the gill, three bands (LDH-2, LDH-4, and LDH-5) in the liver, and two bands (LDH-3 and LDH-4) in the muscle of the normal fish. The LDH-1 bond was not found in the above three tissues. When the fish were exposed to copper, LDH-3 appeared in the liver, LDH-5 in the muscle, but no new LDH band appeared in the gill. 2. The sepcific activities of the LDH were lowest in the gill and highest in the muscle of the normal fish, and they were gradually decreassed in the gill and highest in the muscle of the normal fish, and they were gradually decreased in the liver and mucle except in the gill from 1-day to 10-day exposure to copper. It indicates that LDH activities in the liver and muscle of the fish were inhibited by copper. 3. Through in vitro experiment, it is clear that the decrease of the LDH activities of the liver and muscle of the fish exposed to copper is mainly caused by the inhibition on the M-LDH in the fish. 4. The numbers of the esterase isozyme bands of the gill, liver, muscle, blood, brain, and kidney of the normal fish were 3, 6, 2, 2, 2, and 2 respectively, and these numbers were the same as those exposed to copper. The relative mobilities of the esterase bands in the gill, liver, blood, and kidney of the exposed group were different from those of the control. 5. There was one hemoglobin band on the anode in the normal fish. It seems that the nobility of hemoglobin band of the fish exposed to copper was slightly faster than that of the normal fish. 6. The normal gill lamellae of the fish consisted of centrally located pillar cells and a number of mucus cells. When the fish were exposed to copper, the epithelial layer was divorced first, disintegrated, and then destroyed completely. 7. The liver of the normal fish had prominent central veins, cords of hepatic cells, and sinusoids. When the fish were exposed to copper, numerous droplets of fat appeared in the cells around the central vein of the liver. It is assumed that the fatty droplets were accumulated by the lesion due to fatty metamorphosis of the liver caused by copper. 8. There was no histological difference between the muscle of the normal fish and that of the fish exposed to copper. 9. In the normal fish, the tubules of the kidney were surrounded by hemopoetic tissues. However, the kidney tissue of the fish exposed to copper received some damage on the proximal tubules. Since the tubule cells were reduced in height, the lumens of the tubules were enlarged. Consequently many proximal tubules exhibited some pink-stained granular casts and various stages of degeneration.

• Ocean and Polar Research
• /
• v.32 no.3
• /
• pp.269-289
• /
• 2010

In Summer 2008, a multidisciplinary survey was conducted onboard R/V Haeyang 2000 to understand plankton response to the three distinct physico-chemical settings that developed in the Ulleung Basin of the East Sea. Baseline settings of hydrographic conditions included the presence of the thin (<20 m) Tsushima Surface Water (TSW) on top of the Tsushima Middle Water (TMW). It extends from the Korea Strait to $37^{\circ}N$ along the $130^{\circ}E$ and then turns offshore and encompasses the relatively saline (T>$26^{\circ}C$, S>33.7) Ulleung Warm Eddy surface water centered at $36.5^{\circ}N$ and $131^{\circ}E$. A relatively colder and saline water mass appeared off the southeastern coast of Korea. It was accompanied by higher nutrient and chlorophyll-a concentrations, suggesting a coastal upwelling. Most of the offshore surface waters support low phytoplankton biomass (0.3 mg chl-a $m^{-3}$). A much denser phytoplankton biomass (1-2.3 mg $m^{-3}$) accumulated at the subsurface layer between 20-50 m depth. The subsurface chlorophyll-a maximum (SCM) layer was closely related to the nutricline, suggesting an active growth of phytoplankton at depth. The SCM developed at shallow depth (20-30 m) near the coast and deepened offshore (50-60 m). A fucoxanthin/zeaxanthin ratio was high in coastal waters while it was low in offshore waters, which indicated that diatoms dominate coastal waters while cyanobacteria dominate offshore waters. The community structure and biomass of phytoplanktonare closely related to nitrogen availability. Zooplankton biomass was higher in the coastal region than in the offshore region while species richness showed an opposite trend. Zooplankton community structure retained a coastal/offshore contrast. These suggest that summer hydrography is a stable structure, lasting long enough to allow a hydrography-specific plankton community to evolve.