• 한국재료학회지
• /
• 제28권1호
• /
• pp.32-37
• /
• 2018

We report on the efficient detection of NO gas by an all-oxide semiconductor p-n heterojunction diode structure comprised of n-type zinc oxide (ZnO) nanorods embedded in p-type copper oxide (CuO) thin film. The CuO thin film/ZnO nanorod heterostructure was fabricated by directly sputtering CuO thin film onto a vertically aligned ZnO nanorod array synthesized via a hydrothemal method. The transport behavior and NO gas sensing properties of the fabricated CuO thin film/ZnO nanorod heterostructure were charcterized and revealed that the oxide semiconductor heterojunction exhibited a definite rectifying diode-like behavior at various temperatures ranging from room temperature to $250^{\circ}C$. The NO gas sensing experiment indicated that the CuO thin film/ZnO nanorod heterostructure had a good sensing performance for the efficient detection of NO gas in the range of 2-14 ppm under the conditions of an applied bias of 2 V and a comparatively low operating temperature of $150^{\circ}C$. The NO gas sensing process in the CuO/ZnO p-n heterostructure is discussed in terms of the electronic band structure.

• 한국진공학회지
• /
• 제6권1호
• /
• pp.69-76
• /
• 1997

순간 증착법으로 $Bi_{0.5}Sb_{1.5}Te_3$(p형)와 $Bi_2Te_{2.4} Se_{0.6}$(n형) 박막을 제조하여 두께와 어닐 링 조건에 따른 Seebeck 계수, 전기전도도, carrier 농도 및 이동도, 열전도도, 성능지수의 변화 등 열-전기적 특성을 조사하였다. 473K에서, 1시간 진공 열처리한 결과 p형과 n형의 성능지구는 각각 $1.3{\times}10^{-3}K^{-1}$ 및 $0.3{\times}10^{-3}K^{-1}$으로 향상되었으며 두께에 크게 의존하지 않았 다. 이런 성질을 갖는 열전 박막을 소자화한 박막 온도 센서를 유리와 Teflon기판 위에 제 조하였으며, 이들의 온도 변화에 대한 열기전력, 민감도 및 시간 상수 등 센서 특성을 측정 하였다. p 및 n형의 leg 폭 1mm$\times$길이 16mm인 박막 온도 센서의 경우, Teflon 기판일 때 좋은 성능을 나타내었으며, 민감도는 2.91V/W, 시간 상수는 28.2초이었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.218-221
• /
• 2002

We have successfully developed the high performance flexible thin film diode device for flexible plastic film LCD. For flexible LCD, TFD device must be normally operated under any deformation state. Two type devices, Ti/Ta$_2$O$\sub$5//Ta and Al/Ta$_2$O$\sub$5//Al were fabricated and the symmetry and reliability of those were estimated under various measurement conditions including severely bending states.

• 전기의세계
• /
• 제25권1호
• /
• pp.104-107
• /
• 1976

The switching characteristics of Non-crystalline As-Te-Si-Ge thin film device using Ag, In and Al metal for electrode, has been investigated. Threshold voltage and holding current of each sandwich type device varied due the to formation of the potential barrier in between non crystalline solid and electrode interface.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.309-309
• /
• 2010

We have investigated the effect of $H_2$ plasma treatment on the BZO (ZnO:B, Boron doped ZnO) thin films. The BZO thin films are prepared by LP-MOCVD (Low Pressure Metal Organic Chemical Vapor Deposition) technique and the samples of BZO thin film are performed with $H_2$ plasma treatment by plasma treatment system with 13.56 MHz as RIE (Reactive Ion Etching) type. After exposing $H_2$ plasma treatment, measurement of transmittance, reflectance and haze spectra in 300~1100 nm, electrical properties as resistivity, mobility and carrier concentration and work function was analysed. Regarding the results of the $H_2$ plasma treatment on the BZO thin films are application to the TCO for solar cells, such as the a-Si thin films solar cell.

• 한국전자통신학회논문지
• /
• 제16권6호
• /
• pp.1095-1100
• /
• 2021

본 연구에서는 고주파 마그네트론 스퍼터링 법으로 유리, 사파이어, PEN 기판 위에 ITZO 박막을 증착하여 전기적 및 광학적 특성을 조사하였다. 유리와 사파이어 기판위에 증착한 ITZO 박막의 비저항은 각각 3.08×10-4 과 3.21×10-4 Ω-cm로 큰 차이를 보이지 않은 반면 PEN 기판위에 증착한 ITZO 박막의 비저항은 7.36×10-4 Ω-cm로 다소 큰 값이 측정되었다. 기판의 종류와 무관하게 ITZO 박막의 평균 투과도의 차이는 크지 않았다. 유리 기판위에 증착한 ITZO 박막의 비정질 실리콘 박막 태양전지의 흡수영역에서의 평균 투과도와 P3HT : PCBM 유기물 활성층의 흡수영역에서의 평균 투과도를 이용하여 구한 재료평가지수는 각각 10.52와 9.28×10-3 Ω-1로 가장 우수한 값을 나타내었다. XRD와 AFM 측정을 통해, 기판의 종류에 상관없이 모든 ITZO 박막이 비정질 구조를 나타내며 핀홀이나 크랙 같은 결함이 없는 표면을 가짐을 확인할 수 있었다.

• 마이크로전자및패키징학회지
• /
• 제21권1호
• /
• pp.13-17
• /
• 2014

The direct-patternable $SnO_2$ thin film was successfully fabricated by photochemical metal-organic deposition. The composition and chemical bonding state of $SnO_2$ thin film were analyzed by using X-ray photoelectron spectroscopy (XPS) from the surface to the interface with Si substrate. XPS depth profiling analysis allowed the determination of the atomic composition in $SnO_2$ film as a function of depth through the evolution of four elements of C 1s, Si 2p, Sn 3d, and O 1s core level peaks. At the top surface, nearly stoichiometric $SnO_2$ composition (O/Sn ratio is 1.92.) was observed due to surface oxidation but deficiency of oxygen was increased to the interface of patterned $SnO_2/Si$ substrate where the O/Sn ratio was about 1.73~1.75 at the films. This O deficient state of the film may act as an n-type semiconductor and allow $SnO_2$ to be applied as a transparent electrode in optoelectronic applications.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1459-1462
• /
• 2007

In general a thermoelectric cooler (TEC) consists of a series of P type and N type thermoelectric materials sandwiched between two wafers. When a DC current passes through these materials, three different effects take place; Peltier effect, Joule heating effect and heat transfer by conduction due to temperature difference between hot and cold plates. In this study we have developed a micro TEC using $Bi_2Te_3$ (N type) and $Bi_{0.5}Sb_{1.5}Te_3$ (P type) thin films. In order to improve that performance of a micro TEC, we made 10 um height TE legs using special PR only for lift-off. We measured COP (coefficient of performance) and temperature difference between hot and cold connectors with current.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.47-47
• /
• 2008

P-type transparent semiconductor $SrCu_2O_2$ thin films have been prepared by RF sputtering using low-alkali glass for LCD and quartz as substrates. Single phase of $SrCu_2O_2$ powder was obtained by heating a stoichiometric mixture of CuO and $SrCO_3$ at 1223K for 96h under N2 gas flow, and target was fabricated at 1243K for 24h. Room temperature conductivity of the sintered body was about 0.02S/cm, and the activation energy in the temperature range of $-50^{\circ}C$~RT and RT~$150^{\circ}C$ were 0.18eV, 0.07eV, respectively. Effects of deposition pressure and post-annealing temperature on the electrical and optical properties of the obtained thin film have been investigated.

• 한국전기전자재료학회논문지
• /
• 제20권10호
• /
• pp.883-888
• /
• 2007

Investigation of improving the properties of UV detector which uses the wide bandgap of ZnO are under active progress. The present study focused on the design and fabrication of i-ZnO/p-inversion $layer/n^--Si$ Epi. which is characterized with very thin p-type inversion layer for UV detectors. The i-ZnO thin film for achieving p-inversion layer which was grown by RF sputtering at $450^{\circ}C$ and then annealed at $400^{\circ}C$ in $O_2$ gas for 20 min shows good intrinsic properties. High (0002) peak intensity of the i-ZnO film is shown on XRD spectrum and it is confirmed by XPS analysis that the ratio of Zn : O of the i-ZnO film is nearly 1 : 1. Measurement shows high transmission of 79.5 % in UV range (< 400 nm) for the i-ZnO film. Measurement of $V_r-I_{ph}$ shows high UV photo-current of 1.2 mA under the reverse bias of 30 V.