• International Journal of Internet, Broadcasting and Communication
• /
• 제16권1호
• /
• pp.176-181
• /
• 2024

The desktop-level 3D printing machines makes it easier for independent designers to produce collectible models. Desktop 3D printers that use FDM (Fused Deposition Modeling) technology usually use a minimum nozzle diameter of 0.4mm. When using FDM printers to make Gunpla models, Thin slice structures are prone to slicing errors, which lead to deformation of printed objects and reduction in structural strength. This paper aims to analyze the printing model that produces errors, control a single variable among the three variables of slice layer height, slice wall thickness and filament type for comparative testing, and find a way to avoid gaps. To provide assistance for using FDM printers to build models containing thin-walled structures.

• Current Photovoltaic Research
• /
• 제1권1호
• /
• pp.27-32
• /
• 2013

We investigated the growth mechanism of amorphous-phase Si thin films in order to improve the film characteristics and circumvent photo-degradation effects by implementation of hot-wire chemical vapor deposition. Amorphous silicon thin films grown in a silane/hydrogen mixture can be decomposed by a resistive heat filament. The structural properties were observed by Raman spectroscopy, FTIR, SEM, and TEM. The electrical properties of the films were measured by photo-conductivity, dark-conductivity, and photo-sensitivity. The contents of Si-H and $Si-H_n$ bonds were measured to be 19.79 and 9.96% respectively, at a hydrogen flow rate of 5.5 sccm, respectively. The thin film has photo-sensitivity of $2.2{\times}10^5$ without a crystalline volume fraction. The catalyst behavior of the hot-wire to decompose the chemical precursors by an electron tunneling effect depends strongly on the hydrogen mixture rate and an amorphous Si thin film is formed from atomic relaxation.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2008년도 제39차 학술발표회
• /
• pp.145-146
• /
• 2008

This is studies about light and thin PET fabric having downproof properties using low denier filament yarn. We study how the manufacturing fabric effect on downproof properties according to conditions of low denier yarn, fabricataion, and dyeing and finishing.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2004년도 High Temperature Superconductivity Vol.XIV
• /
• pp.49-49
• /
• 2004

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2004년도 High Temperature Superconductivity Vol.XIV
• /
• pp.34-34
• /
• 2004

• 한국연소학회지
• /
• 제7권2호
• /
• pp.24-33
• /
• 2002

The morphology of deposits on $15-{\mu}m$ thin SiC filaments has been investigated with SEM in a co-flowing, propane/air laminar diffusion flame. The average size of mature soot particles deposited in the luminous flame edge is strongly dependent on their axial position in a typical heavily sooting flame. The surface growth of liquid-phase PAHs molecules and the transition to soots from fully-developed precursors could be observed in the radial deposition of the flame. Two sooting regimes were found: one is the transition from the condensed-phase precursors; the other is the aggregation of smaller soot particles (or chains of them) to be carried along particle path lines. In the high temperature flame edge outside the soot luminous flame surface, the very thin fiber-like structures, which are about 10 nm thick, were found.

• 대한전자공학회논문지
• /
• 제27권9호
• /
• pp.1402-1408
• /
• 1990

We studied the electrical, optical and structural properties of microcrystalline silicon thin films prepared by a new chemical vapour deposition technique, called filament assisted(FA)-CVD. The microcrystalline silicon is sucessfully deposited when the hydrogen dilution ratio exceeds 30. The Raman peak at 520 cm-1 and the X-ray diffraction peak at 27.7\ulcorner0.2\ulcornerbecome sharper with increasing hydrogen dilution ratio. We obtain high quality microcrystalline Si by FA-CVD with optical gap of \ulcorner2.2eV and hydrogen content of \ulcorner3 at %.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.20-20
• /
• 2002

Based on experimental and theoretical analyses, we suggested a new possibility that the CVD diamond films grow not by the atomic unit but by the charged clusters containing a few hundreds of carbon atoms, which form spontaneously in the gas phase [J. Crysta] Growth 62 (1996) 55]. These hypothetical negatively-charged clusters were experimentally confirmed under a typical hot-filament diamond CVD process. Thin film growth by charged clusters or gas phase colloids of a few nanometers was also confirmed in Si and ZrO₂ CVD and appears to be general in many other CVD processes. Many puzzling phenomena in the CVD process such as selective deposition and nanowire growth could be explained by the deposition behavior of charged clusters. Charged clusters were shown to generate and contribute at least partially to the film deposition by thermal evaporation. Origin of charging at the relatively low temperature was explained by the surface ionization described by Saha-Langmuir equation. The hot surface with a high work function favors positive charging of clusters while that of a low work function favors negative charging.

• 한국재료학회지
• /
• 제31권12호
• /
• pp.665-671
• /
• 2021

A 1.8 ㎛ thick polycrystalline diamond (PCD) thin film layer is prepared on a Si(100) substrate using hot-filament chemical vapor deposition. Thereafter, its thermal conductivity is measured using the conventional laser flash analysis (LFA) method, a LaserPIT-M2 instrument, and the newly proposed light source thermal analysis (LSTA) method. The LSTA method measures the thermal conductivity of the prepared PCD thin film layer using an ultraviolet (UV) lamp with a wavelength of 395 nm as the heat source and a thermocouple installed at a specific distance. In addition, the microstructure and quality of the prepared PCD thin films are evaluated using an optical microscope, a field emission scanning electron microscope, and a micro-Raman spectroscope. The LFA, LaserPIT-M2, and LSTA determine the thermal conductivities of the PCD thin films, which are 1.7, 1430, and 213.43 W/(m·K), respectively, indicating that the LFA method and LaserPIT-M2 are prone to errors. Considering the grain size of PCD, we conclude that the LSTA method is the most reliable one for determining the thermal conductivity of the fabricated PCD thin film layers. Therefore, the proposed LSTA method presents significant potential for the accurate and reliable measurement of the thermal conductivity of PCD thin films.

• 한국식품영양과학회지
• /
• 제21권4호
• /
• pp.348-352
• /
• 1992

오리를 고온침탕법과 중온침탕법에 의해 털을 제거하고 다리 및 가슴부위의 골격근에서 actomyosin을 추출하여 몇가지 특성을 비교하엿다. 고온침탕 처리한 근육으로부터 추출된 actomyosin의 추출성은 다리와 가슴근육이 각각 7.84, 39.48mg/g, 중온침탕한 것은 각각 4.79, 28.04mg/g고온침탕법의 추출성이 더 높았다. Actomyosin의 $Ca^{2+}-ATPase$ 활성은 고온침탕법이 다리근육의 경우에서는 중온침탕법보다 낮았으나 가슴근육은 이온강도 0.08 이하에서 중온침탕법이 높았고 그 이상에서는 고온침탕법이 높았다. Actomyosin의 $Mg^{2+}-ATPase$ 활성은 저이온강도에서 활성이 컸으며 가슴근육이 다리근육의 경우보다 침탕법에 의한 활성의 차이가 크게 나타났다. 용해도는 침탕방법과 부위에 관계없이 용해시점과 완료시점이 비슷하였다. 그리고 고온침탕 처리한 근육과 다리보다 가슴근육이 thin filament에 있는 단백질이 많이 추출되어 나오는 현상을 보였다.