• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.146-150
• /
• 2005

A nano-stereolithouaphy (NSL) apparatus has been developed for fabrication of microstructures with the resolution of 150 nanometers. In the NSL process, a complicated 3D structure can be fabricated by building layer by layer, so it does not require any sacrificial layer or any supporting structure. A laminated layer was fabricated by means of solidifying liquid-state monomers using two-photon absorption (TPA) which was induced by a femtosecond laser. When the fabrication of a 3D laminated structure was finished, unsolidified liquid-stage resins were removed to develop the fabricated structure by dropping several droplets of solvent, then the polymerized structure was only left on the glass substrate. A microstructure is fabricated by vector scanning method to save the fabrication time. The shell thickness of a structure is very thin within 200 nm, when it is fabricated by a single contour scanning (SCS) path. So, a fabricated structure can be deformed easily in the developing process. In this work, a double contour scanning (DCS) method was proposed to reinforce the strength of a shell typed structure, and a microcup was fabricated to show the usefulness of the developed NSL system and the DCS method.

• Journal of Sericultural and Entomological Science
• /
• v.18 no.1
• /
• pp.21-26
• /
• 1976

The study was carried out to investigate the variations in the fibroin hydrolysis of different cocoon shell layers, and the relationship between the hydrolysis and silk physical property. The obtained results are as follows: 1. The fibroin hydrolyzing ratio was highest at the inner layer of cocoon shell and. next in order. at the middle layer and at the outer layer. 2. The fibroin hydrolyzing ratio of abnormal cocoons was higher than normal cocoon and it was different among them, tile highest was double coroon, thin shell cocoon and perforated cocoon in order. 3. The sericin content and fibroin hydrolyzing ratio of Jam 111 and Jam 112 was higher than that of Jam 111 $\times$ Jam 112. 4. The fibroin hydroiyzing ratio of the cocoons fed with the artificial diets was increased at the inner layer. The sericin content of those lessened at the inner layer, however, it slightly increased at the most inner layer more than at the inner layer. 5. The breaking strength of the degummed silk fiber of different cocoon layers was reduced at the inner layer. The breaking Strength of abnormal silk fiber was less than that of normal silk fiber. 6. A negative correlation (r= －0.8) )was approved between fibroin hydrolyzing ratio and breaking strength of silk fiber, and the regression line was Y=－0.29x＋5.07.

• Korea-Australia Rheology Journal
• /
• v.19 no.4
• /
• pp.191-199
• /
• 2007

Precision injection molding process is of great importance since precision optical products such as CD, DVD and various lens are manufactured by those process. In such products, birefringence affects the optical performance while residual stress that determines the geometric precision level. Therefore, it is needed to study residual stress and birefringence that affect deformation and optical quality, respectively in precision optical product. In the present study, we tried to predict residual stress, final shrinkage and birefringence in injection molded parts in a systematic way, and compared numerical results with the corresponding experimental data. Residual stress and birefringence can be divided into two parts, namely flow induced and thermally induced portions. Flow induced birefringence is dominant during the flow, whereas thermally induced stress is much higher than flow induced one when amorphous polymer undergoes rapid cooling across the glass transition region. A numerical system that is able to predict birefringence, residual stress and final shrinkage in injection molding process has been developed using hybrid finite element-difference method for a general three dimensional thin part geometry. The present modeling attempts to integrate the analysis of the entire process consistently by assuming polymeric materials as nonlinear viscoelastic fluids above a no-flow temperature and as linear viscoelastic solids below the no-flow temperature, while calculating residual stress, shrinkage and birefringence accordingly. Thus, for flow induced ones, the Leonov model and stress-optical law are adopted, while the linear viscoelastic model, photoviscoelastic model and free volume theory taking into account the density relaxation phenomena are employed to predict thermally induced ones. Special cares are taken of the modeling of the lateral boundary condition which can consider product geometry, histories of pressure and residual stress. Deformations at and after ejection have been considered using thin shell viscoelastic finite element method. There were good correspondences between numerical results and experimental data if final shrinkage, residual stress and birefringence were compared.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.4
• /
• pp.243-251
• /
• 2016

Longitudinally structural cracks are sometimes observed in the pavement on steel plate deck bridges because traffic truck loadings can cause large local deformations of the thin deck plate stiffened by longitudinal and transverse beams. In this study, an improved finite strip method using flat-shell strip, prism, and link elements is presented to investigate local deformations of steel decks with pavements in which flexural and torsional stiffness effects of thin floor beams are rigorously taken into account. A simplified deck model extracted from steel plate-girder bridges is analyzed using the developed FSM and the commercial FE program, ABAQUS and also, their numerical results are compared and discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.217-217
• /
• 2011

Recently, demand for thermally stable metal nanoparticles suitable for chemical reactions at high temperatures has increased to the point to require a solution to nanoparticle coalescence. Thermal stability of metal nanoparticles can be achieved by adopting core-shell models and encapsulating supported metal nanoparticles with mesoporous oxides [1,2]. However, to understand the role of metal-support interactions on catalytic activity and for surface analysis of complex structures, we developed a novel catalyst design by coating an ultra-thin layer of titania on Pt supported silica ($SiO_2/Pt@TiO_2$). This structure provides higher metal dispersion (~52% Pt/silica), high thermal stability (~600$^{\circ}C$) and maximization of the interaction between Pt and titania. The high thermal stability of $SiO_2/Pt@TiO_2$ enabled the investigation of CO oxidation studies at high temperatures, including ignition behavior, which is otherwise not possible on bare Pt nanoparticles due to sintering [3]. It was found that this hybrid catalyst exhibited a lower activation energy for CO oxidation because of the metal-support interaction. The concept of an ultra-thin active metal oxide coating on supported nanoparticles opens-up new avenues for synthesis of various hybrid nanocatalysts with combinations of different metals and oxides to investigate important model reactions at high-temperatures and in industrial reactions.

• Korean Journal of Poultry Science
• /
• v.23 no.1
• /
• pp.19-26
• /
• 1996

The present study was conducted to estimate average weights, and corrlation and regression coefficients among various traits of eggs obtained from Korean native and imported chicken. Data were obtained from 360 layers (180 of Korean native origin, and 180 of imported Decalb Brown) between November 8, 1994 to February 8, 1995. The results obtained are summerized as follows : 1. The mean weights of whole egg, yolk, dense white, thin white, and egg shell of native chicken were lighter (P<0.01) than those of Decalb Brown. 2. The coefficients of variability in each egg trait were lower in native chicken than in Decalb Brown, indicating the higher ability of native chicken to adapt to the local environment. 3. The phenotypic correlation coeffcients between whole egg and weights of yolk, dense white, thin white, and eggshell were 0.842∼0.992(P<0.01) in native chicken, and 0.865∼0.985(P<0.01) in Decalb Brown. 4. The average eggshell thicknesses of native and imported Decalb Brown were 362.5 $\mu\textrm{m}$ and 407.9 $\mu\textrm{m}$, respectively. 5. The regression coefficients of most of the traits of eggs from native chicken were lower than those from Decalb Brown layers, suggesting that Korean native chicken should be improved further in various egg traits measured in this study.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.5
• /
• pp.421-426
• /
• 2010

In this paper, the thickness effect on the wrinkle-crease interaction behavior of corner-loaded creased square membranes was studied using geometrically nonlinear post-buckling analysis. The membranes were modeled using shell elements, and the meshes were seeded with semi-random geometrical imperfection to instigate the buckling deformation. Results indicated that the wrinkle-crease interaction behavior was significantly dependent on the membrane thickness. Both the global and local wrinkles developed earlier as the thickness decreased. It was also found that the wrinkling behavior depended on the initial deployment angle in which the local wrinkle initiation occurred earlier, while the global wrinkle formation was delayed as the angle increased.

• Journal of computational fluids engineering
• /
• v.15 no.2
• /
• pp.28-34
• /
• 2010

Conductive and radiative thermal model configurations of an imager of a geostationary satellite are presented. A two-plane method is introduced for three dimensional conductive coupling which is not able to be treated by thin shell plate thermal modeling technique. Especially the two-plane method is applied to massive matters and PIP(Payload Interface Plate) in the imager model. Some massive matters in the thermal model are modified by adequate correction factors or equivalent thickness in order to obtain the numerical results of thermal modeling to be consistent with the analytic model. More detailed nodal breakdown is specially employed to the object which has the rapid temperature gradient expected by a rule of thumb. This detailed thermal model of the imager is supposed to be used for analyses and test predictions, and be correlated with the thermal vacuum test results before final in-flight predictions.

• Journal of Korea Game Society
• /
• v.9 no.4
• /
• pp.97-106
• /
• 2009

In this paper, a realtime approach to the simulation of virtual paper with an adaptive mesh structure is proposed. The proposed method can be applied to arbitrary triangular mesh structures and efficiently produces wrinkles and creases on the paper surface with stable numerical integration and deformation-based mesh refinement. In order to plausibly represent the crumples on the paper object, we employed an adaptive mesh structure with breakable springs. Because the adaptive structure continuously inserts or removes vertices and edges to or from the mesh structure, the conservation of the mass and the momentum should be carefully taken into account for the plausible simulation of the virtual paper. The proposed method produced plausible animation of paper-like thin shell in realtime environments.

• Journal of the Korean Society of Safety
• /
• v.30 no.3
• /
• pp.107-113
• /
• 2015

The goal of this paper is to investigate structural integrity factors of RMI(reflective metal insulation) to confirm the design requirements in nuclear power plant. Currently, a glass wool insulation is using now, but it will gradually be replaced with the reflective metal insulation maded by stainless steel plates. The main function of an insulation is to minimize a heat loss of vessel and pipes in RCS(reactor coolant system). It has to maintain structural a integrity in nuclear power plant life duration. In this study, the structural integrity analysis was carried out both multi-plate and outer shell plate by using a static analysis and experimental test. First, inner multi-plate has a self support structure for being air space. Because the effect of total static weight in multi-layer plate is low, a plate collapse possibility is not high. Considering optimum thin plate pressing process, it has to pre-check the basic physical properties. Second, the outer segment thickness and stiffener shape are verified by the numerical static analysis, and sample test for both type of panel and cylindrical pipe model.