• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.278-280
• /
• 2001

BSCCO thin films have been fabricated by co-deposition at an ultralow growth rate using ion beam sputtering(IBS) method. The growth rates of the films was set in the region from 0.17 to 0.27 nm/min. MgO(100) was used as a substrate. In order to appreciate stable existing region of Bi 2212 Phase with temperature and ozone pressure, the substrate temperature was varied between 655 and 820$^{\circ}C$ and the highly condensed ozone gas pressure(PO$_3$) in vacuum chamber was varied between 2.0x10$\^$-6/ and 2.3x10$\^$-5/ Torr. Bi 2212 Phase appeared in the temperature range of 750 and 795$^{\circ}C$ and single phase of Bi 2201 existed in the lower region than 785$^{\circ}C$. Whereas, PO$_3$ dependance on structural formation was scarcely observed regardless of the pressure variation. And high quality of c-axis oriented Bi 2212 thin film with T$\sub$c/(onset) of about 70 K and T$\sub$c/(zero) of about 45 K is obtained. Only a small amount of CuO in some films was observed as impurity, and no impurity phase such as CaCuO$_2$ was observed in all of the obtained films.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.415-415
• /
• 2013

We have investigated the optical and electrical properties of the CIGS thin film solar cells by the electroreflectance (ER), photoreflectance (PR), photoluminescence (PL), and photocurrent (PC) spectroscopies at room temperature. The ER spectrum had two narrow signal regions and one broad signal region. We measured PL and PC to confirm the signals at low energy region (1.02~1.35 eV), so these signals are related to the CIGS thin film, and the high energy region (2.10~2.52 eV) is related to the CdS bandgap energy. The broad signal region (1.35~2.09 eV) is due to the internal electric field by the p-n junction from the comparison between PR and ER spectra, and we calculated the internal electric field by the p-n junction. In the high efficiency solar cell, the CdS signal of ER spectrum is narrower than the lower efficiency solar cells.

• 반도체디스플레이기술학회지
• /
• 제9권1호
• /
• pp.29-33
• /
• 2010

Recently, the growth of ZnO thin film on glass substrate has been investigated extensively for transparent thin film transistor. We have studied the phase transition of ZnO thin films from metal to semiconductor by changing RF power in the deposition process by RF magnetron sputtering system. The structural, electric, and optical properties of the ZnO thin films were investigated. The film deposited with 75 watt of RF power showed n-type semiconductor characteristic having suitable resistivity $-3.56\;{\times}\;10^{+1}\;{\Omega}cm$, carrier concentration $-2.8\;{\times}\;10^{17}\;cm^{-3}$, and mobility $-0.613\;cm^2V^{-1}s^{-1}$ while other films by 25, 50, 100 watt of RF power closed to metallic films. From the surface analysis (AFM), the number of crystal grain of ZnO thin film increased as RF power increased. The transmittance of the film was over 88% in the visible region regardless of the change in RF power.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1308-1310
• /
• 1994

The electrochromism of $WO_3$ and $V_2O_5$ thin films have been studied. The $WO_3$ thin film is found to be cathodic coloration material and the coloration efficiency of this film is close to $60 [cm^2/C]$ in the near infrared region. The $V_2O_5$ thin film exhibits cathodic coloration in tile near infrared and anodic coloration in the blue and near UV region. The cathodic coloration in the $450{\sim}1100 nm$ wavelength range is relatively weak with a maximum coloration efficiency of $6 [cm^2/C]$).

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.666-672
• /
• 1996

The optical property of CdTe thin film is important for applications such as the compound semiconductor type solar cells. CdTe films are prepared by RF sputtering at various substrate temperature between $25^{\circ}C$ and $300^{\circ}C$, then, annealed in argon gas environment at $400^{\circ}C$. The annealing process of the thin film caused variation in the film structure and the composition of films. The deformation of CdTe thin film was observed by X-ray diffractometry. After annealing, the grain size increased and the portion of the non-crystalline CdTe reduced. Futhermore, the structure of sputtered CdTe film grown at the substrate temperature more than $250^{\circ}C$ was enhanced in the (111) direction of zincblend structure. There was a discrepancy, in the spectroscopic ellipsometer spectrum, between the single crystal CdTe and the sputtered CdTe thin films, especially in the region over 3.2eV. An oxidation layer was found on the CdTe thin film by spectroscopic ellipsometry analysis.

• 한국안광학회지
• /
• 제7권2호
• /
• pp.175-180
• /
• 2002

렌즈의 thin film 균일성을 평가하기 위하여 spctrophotometer를 이용한다. 렌즈의 중심 중간, edge 등의 지점에서 파장의존상의 반사율을 측정하여 반사율 spectrum의 두 peak를 선택하여 비교하여, 박막 균일성 여부를 분석한다. 반사율의 두 peak의 파장 영역(${\lambda}_1,{\lambda}_2$)으로부터 thin film의 thickness(t)를 구한다. $$t=\frac{1}{2(n^2-\sin^2{\theta})^{1/2}}{\times}\frac{{\lambda}_1{\lambda}_2}{{\lambda}_2-{\lambda}_1}$$ 렌즈의 중심 중간, edge 등의 지점에서 반사율 pattern이 동일 값이면 coating 렌즈의 박막은 균일성 갖는다. coating 렌즈의 박막 균일성 평가 방법을 단층막 $MgF_2$(n=1.38) coating 렌즈에 적용하였다. 박막의 thickness 차이는 360nm 정도였다. 파장의존성에 대한 광반사율의 측정으로부터 coating 렌즈의 박막 균일성을 쉽게 분석할 수 있다.

• 한국전기전자재료학회논문지
• /
• 제17권10호
• /
• pp.1061-1067
• /
• 2004

In this study, ferroelectric (Ba,Sr)TiO$_3$ and high temperature superconductor YBCO thin films were fabricated by PLD (Pulsed Laser Deposition) method and tuneable bandstop filters were implemented with two different IDC(Interdigital Capacitance) gap patterns, 20${\mu}{\textrm}{m}$ and 30${\mu}{\textrm}{m}$ using these two thin film layers. The resonant frequency was changed by DC bias voltage. By comparing measured results with simulation, the dielectric properties of ferroelectric thin film have been extracted. The permittivity was 820 ～ 900 at 30 K and had an acceptable error range but the loss tangent had a great difference, 0.018 in 30${\mu}{\textrm}{m}$ IDC gap pattern and 0.037 in 20 ${\mu}{\textrm}{m}$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.66-69
• /
• 2001

Effect of $N_2$ flow rate on properties of GaN thin films grown by plasma-enhanced molecular beam epitaxy(PEMBE) was discussed to optimize the quality of thin films. It was found that at low $N_2$ flow rate indicating high III/V flux ratio, the growth rate of GaN thin films was controlled by $N_2$ flux, and at high $N_2$ flow rate the growth rate was not controlled by $N_2$ flux any longer. It was also found that III/V flux ratio affected film quality. The film grown at higher $N_2$ flow rate showed low background carrier concentration, higher carrier mobility, and narrow FWHM in band-edge emission of low temperature PL. It is thought that the film in more Ga flux region was grown by 2-dimensional layer-by-layer growth mode, and the film in more nitrogen region was grown by 3-D island growth mode. All samples exhibited a good crystallinity.

• Transactions on Electrical and Electronic Materials
• /
• 제16권1호
• /
• pp.29-33
• /
• 2015

This paper presents the results of the optical characteristics of ITO thin film with different buffer layer thicknesses of $SiO_2$ and $Nb_2O_5$ for touch sensor application. $SiO_2$ and $Nb_2O_5$ buffer layers were deposited using RF magnetron sputtering equipment. The buffer layers were inserted between glass and ITO layers. In order to compare with the experimental results, the Essential Macleod Program (EMP) was adopted. Based on EMP simulation, the [$Nb_2O_5{\mid}SiO_2{\mid}ITO$] multi-layered thin film exhibited high transmittance of more than 85% in the visible region. The actual experimental results also showed transmittance of more than 85% in the visible region, indicating that the simulated results were well matched with the experimental results. The sheet resistance of ITO based film was about $340{\Omega}/sq$. The surface roughness maintained a relatively small value within the range of 0.1~0.4 nm when using the $Nb_2O_5$ and $SiO_2$ buffer layers.

• 한국전자통신학회논문지
• /
• 제18권5호
• /
• pp.797-802
• /
• 2023

본 연구에서는 펄스 레이저 증착법으로 기판 온도에 따른 GZO(Ga₂O₃ : 5 wt %, ZnO : 95 wt %) 박막을 유리 기판에 증착하여 전기적 및 광학적 특성을 조사하였다. XRD측정을 통해 기판 온도에 무관하게 모든 GZO 박막이 c 축으로 우선 성장함을 확인할 수 있었고, 300℃ 에서 증착한 GZO 박막이 반가폭 0.38° 로 가장 우수한 결정성을 나타내었다. 기판 온도가 150에서 300℃ 로 증가함에 따라 GZO 박막의 비저항은 감소하는 경향을 보인 반면에 가시광 영역에서의 평균 투과도는 크게 영향을 받지 않는 것으로 조사되었다. 300℃ 에서 증착한 GZO 박막의 재료 평가 지수가 2.05×10⁴ Ω^-1·cm^-1 로 가장 우수한 값을 나타내었고, 이때 비저항과 가시광 영역에서의 평균 투과도는 각각 3.72 × 10^-4 Ω·cm 과 87.71 % 이었다. 본 연구를 통해 GZO 박막이 매우 유망한 투명 전도막 재료라는 것을 알 수 있었다.