• 제목/요약/키워드: Thickness of letters

검색결과 48건 처리시간 0.021초

수소생산을 위한 Rhodopseudomonas sphaeroides의 최적 배양조건 (Optimum Culture Conditions for Hydrogen Production of Rhodopseudomonas sphaeroides)

  • 김진상;홍용기;신일식;조학래;장동석
    • 한국미생물·생명공학회지
    • /
    • 제19권2호
    • /
    • pp.179-185
    • /
    • 1991
  • We examined optimum culture conditions of Rhodopseudomonas sphaeroides B5 for effective utilization of substrate and sunlight for hydrogen production. The optimum concentration range of DL-lactate as electron donor for hydrogen production by resting cells was from 5 to 50mM, and optimun CN ratio (lactate/glutamat) for maintenence of hydrogen production activity by growing cultures was from 5 to 6. Hydrogen production by the cultures of low cell density (0.36mg/ml dry cells) was saturated with 10 Klux light intensity. Under constant illumination of 50Klux which was set up as the average medium value of annual variation of sunlight intensity, hydrogen production with various cell densities in the culture resulted in highest production rate (132${\mu}$l/hr/mg dry cells) up to 0.64mg/ml dry cells. However, the amount of total hydrogen production was saturated with cell density of 2.1mg/ml dry cells. In addition to these, the optimum inner thickness pervious to light of the culture vessel for hydrogen production which was measured under sunlight was 5 cm.

  • PDF

Study of complex electrodeposited thin film with multi-layer graphene-coated metal nanoparticles

  • Cho, Young-Lae;Lee, Jung-woo;Park, Chan;Song, Young-il;Suh, Su-Jeong
    • Carbon letters
    • /
    • 제21권
    • /
    • pp.68-73
    • /
    • 2017
  • We have demonstrated the production of thin films containing multilayer graphene-coated copper nanoparticles (MGCNs) by a commercial electrodeposition method. The MGCNs were produced by electrical wire explosion, an easily applied technique for creating hybrid metal nanoparticles. The nanoparticles had average diameters of 10-120 nm and quasi-spherical morphologies. We made a complex-electrodeposited copper thin film (CETF) with a thickness of $4.8{\mu}m$ by adding 300 ppm MGCNs to the electrolyte solution and performing electrodeposition. We measured the electric properties and performed corrosion testing of the CETF. Raman spectroscopy was used to measure the bonding characteristics and estimate the number of layers in the graphene films. The resistivity of the bare-electrodeposited copper thin film (BETF) was $2.092{\times}10^{-6}{\Omega}{\cdot}cm$, and the resistivity of the CETF after the addition of 300 ppm MGCNs was decreased by 2% to ${\sim}2.049{\times}10^{-6}{\Omega}{\cdot}cm$. The corrosion resistance of the BETF was $9.306{\Omega}$, while that of the CETF was increased to 20.04 Ω. Therefore, the CETF with MGCNs can be used in interconnection circuits for printed circuit boards or semiconductor devices on the basis of its low resistivity and high corrosion resistance.

비접촉식 열공구를 이용한 VLM-ST 제품의 미세 형상 가공 공정 개발에 관한 연구 (Development of Shape refining process of VLM-ST Parts Using Noncontacting Hot Tool)

  • 김효찬;이상호;안동규;양동열
    • 한국정밀공학회지
    • /
    • 제21권1호
    • /
    • pp.149-158
    • /
    • 2004
  • In most RP processes, the inherent stair-stepped surfaces and shrinkage-induced warping of the parts require post processing such as surface finishing. To minimize such defects, VLH-ST, a newly developed RP process, employs a 3.9-mm thick expandable polystyrene (EPS) foam sheet and a hot wire to contour it to have slant linear-interpolated sides. The use of relatively thick sheets for layers, however, limits the process capability of constructing fine details, especially smaller than the layer thickness. This study is focused on the development of a post processing method fo fine details of VLM-ST parts. The post-processing tool was designed to meet all the requirements for the desirable post processing. It adopted a hot wire as a means of melting the EPS foam sheet. Various basic experiments on the post processing were carried out to obtain the optimal process conditions. The dominant process parameters such as the radiated heat input, the tool speed, and the gap between the tool tip and the foam sheet (tool height) were considered in the experiments. The effectiveness of the developed post-processing method fo forming or engraving fine details on the VLM-ST parts has been thus demonstrated. The experiments on engraving several sets of letters, such as CANESM, 인간, and 한국과학기술원, on the EPS foam sheet were carried out. In addition, a flowery shape was engraved on a three-dimensionally curved surface of a pottery-shape VLM-ST part.

Evaluation of Dermal Absorption Rate of Pesticide Chlorpyrifos Using In Vitro Rat Dermal Tissue Model and Its Health Risk Assessment

  • Kim, Su-Heyun;Jang, Jae-Bum;Park, Kyung-Hun;Paik, Min-Kyoung;Jeong, Sang-Hee
    • 대한의생명과학회지
    • /
    • 제22권4호
    • /
    • pp.140-149
    • /
    • 2016
  • All pesticides must be assessed strictly whether safe or not when agricultural operators are exposed to the pesticides in farmland. A pesticide is commonly regarded as safe when estimated dermal absorption amount is lower than the acceptable operator's exposure level (AOEL). In this study, dermal absorption rate of chlorpyrifos, a widely used organophosphate insecticide, was investigated using rat dermal tissue model. Chlorpyrifos wettable powder solved in water (250, 500 and 2,500 ppm) was applied to freshly excised rat dermal slices ($341{\sim}413{\mu}m$ thickness) on static Franz diffusion cells at $32^{\circ}C$ for 6 hours. After exposure period of 6 hours, and then washing-at residual amount of chlorpyrifos was analyzed in dermal tissues, tape strips, washing solution, washing swabs of receptor bottles and receptor fluids at 1, 2, 4, 8 and 24 hours. Chlorpyrifos was only detected in dermal tissue but not found in receptor fluid at each concentration and time point, and the absorption rate of 250, 500 and 2,500 ppm was 2.36%, 1.96% and 1.69%, respectively. The estimated exposure level of chlorpyrifos was calculated as 0.012 mg/kg bw/day. The health risk for farmers in this condition is a level of concern because the estimated exposure level is 12 times higher than AOEL 0.001 mg/kg bw/day. However, actual health risk will be alleviated than estimated because absorbed chlorpyrifos is not permeated into internal body system and only retained in skin layer.

Seibel 포도즙 알코올 발효 및 저장 중 휘발성 향기성분의 변화 (Changes of Volatile Flavor Compounds of Seibel Grape Must during Alcohol Fermentation and Aging)

  • 고경희;장우영
    • 한국미생물·생명공학회지
    • /
    • 제27권6호
    • /
    • pp.491-499
    • /
    • 1999
  • A great variety of the volatile metabolic by-products was formed in yeast cell during alcohol fermentation. The seibel grape (Vitis labrasca) which was grown in the Southern Korea used for wines. The objective of this research was to identify the volatile flavor compounds during alcohol fermentation and aging at 12$^{\circ}C$. saccharomyces cerevisiae and Schizosaccharomyces pombe were inoculated and fermented in seibel grape must. The volatile flavor compounds of logarithmic, stationary and death phases were extracted, concentrated and identified by gas chromatography/mass spectrometer (GC/MS). The volatile flavor compounds were determined by a Hewlett-Packard 5890 II Plus GC which was equipped with Supelcowax 10 fused silica capillary column (60m$\times$0.32mm$\times$0.25${\mu}{\textrm}{m}$ film thickness) wall coated with polyethyleneglycerol. The scan detection method allowed the comparison of the spectrum from the chromatogram of volatile flavor compounds to those in data Wileynbs base library. Among the volatile compounds collected by ether-hexane extraction method, the evolution of 20 main compounds, such as 9 esters (ethyl butyrate, isoamyl acetate, ethyl caproate, n-hexyl acetate, ethl caprylate, ethyl caprate, diethy succinate, ethyl hexadecanoate, 2-pheneethyl acetate), 4 alcohols (3-methyl-1-butanol, 1-hexanol, 1-heptanol, benzoethanol), 4 ketones and acids (2-octanone, caproic acid, caprylic acid, capric acid), 2 furan and phenol (2,6-bis(1,1-dimethyl ethyl)phenol, 2,3-dihydrobenzofuran) were observed during alcohol fermentation and aging. The production of the esters during alcohol fermentation with S. cerevisiae was higher than those of Sch. pombe. The sensory scores of the aged wine samples in aroma, taste and overall acceptability were not significantly different(p<0.05).

  • PDF

A Quantitative Comparison of Fibroblasts, Collagen and Elastic Fiber Densities in the Young and Aged Rat Skin

  • ;;이재형
    • 대한의생명과학회지
    • /
    • 제13권1호
    • /
    • pp.55-60
    • /
    • 2007
  • Computerized image processing and analysis system was used for quantitative assessment of skin tissue components in color histological sections. The purpose of this study was to determine that the changes in the collagen fiber density and elastic fiber density in dermis in the rat skin as aging. And also to determine that the correlation between fibroblast density and collagen fiber density and elastic fiber density in the aged rat skin. Ten weeks old ($130{\sim}150g$) eight and fifty-four weeks old ($300{\sim}350g$) eight female Sprague-Dawley rats were used. The full-thickness skin biopsy specimens were prepared serial sections and stained with hematoxylin and eosin, Masson's trichrome and Verhoeff-van Gieson. The collagen fiber and the elastic fiber were identified using the image analysis processing system and then calculated the collagen fiber density rate and the elastic fiber density rate in the dermis. It also identified fibroblast and calculated fibroblast density in the dermis. By using a Student's t-test, a decrease in the collagen fiber density rate (t=-4.650, P<0.001) and the elastic fiber density rate (t=-6.494, P<0.001) of dermis can be observed in aged rats as compared with the young rats. A Student's t-test showed a significantly less fibroblast density in the aged rats than the young rats (t=-4.497, P<0.001). There were significantly positive correlation between the fibroblast density and the collagen fiber density rate (r=.69, P<0.001) and the elastic fiber density rate (r=.91, P<0.001). These results indicate that the aging may decrease the collagen fiber density and elastic fiber density due to reduced the proliferative and synthetic activity of fibroblast in the dermis.

  • PDF

조선시대 왕릉 석물의 재료와 제작 방법 변화에 관한 연구 - 신도비와 표석, 상석을 중심으로 - (A Study on the Change of Materials and Fabrication Techniques of Stone Figures in Royal Tombs of the Joseon Period - Focusing on Shindobi, Pyo-Seok, and Sang-Seok -)

  • 차문성
    • 헤리티지:역사와 과학
    • /
    • 제52권4호
    • /
    • pp.56-77
    • /
    • 2019
  • 비석은 상례문화의 보고이자 서예사의 정수로서 시대사·사회사를 조명할 수 있는 중요한 문화재지만 그 연구는 아직 미미하다. 특히 비각의 제작 방식에 관한 것은 아직 미증유의 분야로 남아 있어 연구가 절실한 편이다. 비석의 제작은 석재의 탁마 과정과 조각, 그리고 글씨를 새기는 북칠 과정으로 대별할 수 있다. 본고에서는 이와 관련하여 몇 가지의 사실을 밝히고 있다. 첫째, 신과 관련한 의물(神儀物)인 상석, 혼유석, 비석에는 정교한 마정(磨正) 작업을 가한다. 이는 임진왜란, 병자호란의 영향으로 인한 유교적 상·제례의 정착과 전파로 혼유석에 대한 인식의 변화에 기인한다. 둘째, 영조 때 오석(烏石)의 비약적인 확산과 사저취용(私儲取用)은 사회·문화사적으로 큰 의미를 가지고 있다. 상품(上品)의 강화석이 고갈되자 사대부에서 사용하던 오석을 천릉한 장릉에 사용한 이후 사대부들을 중심으로 퍼지게 된다. 특히 오석의 사용과 마정 작업은 화학적·물리적 손상을 최소화시킬 수 있었다. 셋째, 비석의 각자 기술은 북칠(北漆)에 있다. 효종 영릉 천릉 시에 송시열의 지문을 북칠한 이후부터 북칠 과정은 동아시아에서 우리나라가 가장 성행했고 제도화된 점은 특기할 만하다. 북칠은 오석의 검은 색으로 인해 흑묵보다 붉은 당주를 이용하면서 더욱 정교화된다. 넷째, 조선 후기에 들어서면서 각자 방식에도 변화가 일어난다. 영조 연간까지 각자는 획의 두께에 따라 각의 깊이를 결정해 음영을 표현하고 양감을 나타냈다. 물론 이 같은 기법은 모든 표석이나 신도비에서 나타나는 것은 아니나 내수사에 소속된 뛰어난 경공장들의 전습에 의해 유지되었다. 따라서 비석을 제작하기 위해서는 숙석, 연정, 마정, 정간, 초도서입, 중초, 입각, 교정, 장황의 단계를 거쳐 하나의 완성품이 이뤄진다. 이러한 것은 묘주에 대한 존경심과 공업을 알리는 목적이지만, 이를 통해 공예 기능의 분업과 협업에 바탕을 둔 작업이 표석의 전체 제작 과정에 나타난다는 사실을 알 수 있다.

참모자반 물 추출물의 항아토피 효과 (Inhibitory Effect of Sargassum fulvellum Water Extract on 2,4-Dinitrochlorobenzene-induced Atopic Dermatitis-like Skin Lesions in Mice)

  • 정다현;안나경;최연욱;박지혜;배난영;박선희;김민지;김꽃봉우리;안동현
    • 한국미생물·생명공학회지
    • /
    • 제43권2호
    • /
    • pp.150-157
    • /
    • 2015
  • 본 연구는 BALB/c mice의 등 쪽 부위에 반복적인 DNCB 도포를 통해 유발시킨 아토피 피부염에 있어서 참모자반 물 추출물의 효능에 대해 연구하였다. 참모자반 물 추출물을 2주 동안 지속적으로 처리하고 IL-4 및 IFN-γ cytokine의 분비량, 비장세포 증식능, 혈청 중 총 IgE 함량, 육안 평가 및 skin clinical severity score, 조직관찰을 실시하였다. 그 결과 참모자반 물 추출물을 지속적으로 도포함으로써 IL-4 cytokine과 총 IgE 함량이 현저히 감소하는 것을 확인할 수 있었으며 IFN-γ cytokine은 유의적으로 증가하는 것을 확인하였다. 비장세포 증식능에는 참모자반 물 추출물의 도포처리가 큰 영향을 미치지 않는 것으로 나타났다. 육안평가 및 skin clinical severity score 결과, 참모자반 물 추출물을 2주간 지속적으로 도포 처리하였을 때, 그 증상이 눈에 띄게 완화되는 것을 확인할 수 있었으며 score 또한 DNCB 단독 처리군과 비교 시 유의적으로 감소하였다. 등 조직 관찰에서도 참모자반 물 추출물에 의해 DNCB로 유발된 아토피 동물 실험군의 경피 및 진피 조직 두께 및 진피에서의 mast cell의 침윤 정도가 감소되었음을 확인하였다. 이상 결과를 종합 해볼 때, 참모자반 물 추출물이 아토피 피부염 치료제로서 이용 가능성이 있을 것으로 사료된다.

Electrical Stimulation Promotes Healing Accompanied by NOR in Keratinocytes and IGF-1 mRNA Expression in Skin Wound of Rat

  • Lee, Jae-Hyoung;Lee, Jong-Sook;Jeong, Myung-A.;JeKal, Seung-Joo;Kil, Eyn-Young;Park, Seung-Teack;Park, Chan-Eui
    • 대한의생명과학회지
    • /
    • 제13권1호
    • /
    • pp.25-32
    • /
    • 2007
  • The purpose of this study was to investigate the effect of the high voltage pulsed Current (HVPC) stimulation on the healing rate and the proliferative activity of keratinocytes and IGF-I mRNA expression of an incisional wound in rat skin. Twenty male Sprague-Dawley rats ($265{\sim}290g$) were randomly divided into HVPC (n=10) and control group (n=10). Rats received 10 mm length of full-thickness incision wound on the back under the anesthesia. The HVPC group received electrical stimulation with a Current intensity of 50 V at 100 pps for a duration of 30 minutes, while the control group was given the same treatment without electricity for a week. Polarity was negative in first three days and positive thereafter. The wound length was measured and evaluated as percentage. The mean number of nucleolar organizer regions (NORs) per nucleus and level of IGF-I mRNA expression were calculated. The mean percent of wound closure were $51.17{\pm}17.76%$ and $80.71{\pm}11.91%$, respectively, in the sham treated control and HVPC stimulated groups (t=-4.308, P<0.001). The mean NOR number per nucleus of the keratinocytes in the control and HVPC group were $1.85{\pm}0.20$ and $2.70{\pm}0.23$, respectively (t=8.638, P<0.001). The IGF-I mRNA level were $0.76{\pm}0.44$ and $1.32{\pm}0.41$, respectively, in the control and HVPC stimulated wounds (t=2.906, P<0.01). There was a positive correlation between the mean NOR number per nucleus and IGF-l mRNA level with a Pearson product moment correlation coefficient of 0.72 (P<0.05). These findings suggest that the HVPC may activate the rRNA of the basal keratinocytes and upregulate the IGF-I mRNA levels by alteration of the electrical environment, and it may increase proliferative activity of the keratinocytes in the skin wound of the rat.

  • PDF

NF-κB와 MAPKs 활성 저해를 통한 미야베 모자반(Sargassum miyabei Yendo) 에탄올 추출물의 항염증 활성 (Anti-Inflammatory Activity of Ethanol Extract of Sargassum miyabei Yendo via Inhibition of NF-κB and MAPK Activation)

  • 김민지;배난영;김꽃봉우리;박선희;장미란;임무혁;안동현
    • 한국미생물·생명공학회지
    • /
    • 제44권4호
    • /
    • pp.442-451
    • /
    • 2016
  • 본 연구에서는 미야베 에탄올 추출물의 항염증 활성을 확인하기 위해 LPS로 활성화된 RAW 264.7 세포와 croton-oil로 유도된 귀부종 동물 모델을 이용하였다. 그 결과, SMYEE 50 및 $100{\mu}g/ml$ 농도처리 시, LPS로 유도된 염증반응에서 $NF-{\kappa}B$ 활성 억제와 더불어 MAPKs의 인산화를 효과적으로 억제함을 보였다. LPS에 의해 증가된 NO와 전염증성 사이토카인의 분비량도 농도 의존적으로 감소하였다. 또한 SMYEE는 croton oil로 부종을 유발한 마우스모델에서 귀부종 억제효과를 나타내었고, 조직의 진피 두께 및 mast cell의 수가 현저히 감소하였음을 확인하였다. 이를 통해 SMYEE는 염증 반응의 전사인자인 $NF-{\kappa}B$ 및 MAPKs의 활성을 조절함으로써 iNOS와 COX-2의 발현 및 전염증성 매개인자인 NO, IL-6, $TNF-{\alpha}$$IL-1{\beta}$의 분비를 억제하여 항염증 활성을 가지는 것을 확인하였다. 현재까지 미야베 모자반내의 항염증 효능 물질에 관한 연구는 보고되지 않고 있으며 향후 실험을 통해 미야베 모자반 에탄올 추출물로부터 항염증 효과를 가지는 유효성분을 밝히기 위한 분리 연구를 진행할 예정이다.