• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.476-481
• /
• 2013

Ethylbenzene (EB) which has a similar physical properties with p-xylene (pX) was separated from EB/pX mixture by using MFI-type zeolite (TS-1, ZSM-5, and Silicalite-1) coated membranes. The zeolites were synthesized by microwave method to reduce the synthesis time and uniformly formed zeolite particles were coated on the ${\alpha}$-almina tubular support with a thickness of $3-4{\mu}m$. Separation factor and permeation flux of the synthesized zeolite coated membranes were measured to survey the best performance of ethylbenzene separation from different composition of EB/pX mixtures. When the EB/pX mixture of 5:5 molar ratio applied for the separation experiment, it represented the highest separation factor. We also have studied about the effect of the atomic composition of zeolites on the separation performance within the temperature range from 160 to $220^{\circ}C$. TS-1 showed the highest permeation flux of $1,666mol/m^{2*}s^*Pa$ and Silicate-1 showed the highest separation factor of 1.73 at $200^{\circ}C$ respectively.

• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.407-411
• /
• 2015

Dense ceramic membranes have been prepared using the commercial perovsikite $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$, powders synthesized by the solid state reaction method. The as-synthesized powders were compressed into disks with 1.0 mm of thickness and the disk was sintered at $1,100^{\circ}C$ for 2 hr. The oxygen permeation flux of $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ membrane increased with the increasing temperature and oxygen partial pressure. The activation energy for oxygen permeation was increased with the increasing oxygen partial pressure. Oxygen permeation flux at $950^{\circ}C$ were measured at various flow rates of feed and sweep gas. It has been demonstrated that oxygen permeability increased at elevated flow rates of both gases, but the sweep gas is more influential.

• Journal of the East Asian Society of Dietary Life
• /
• v.9 no.3
• /
• pp.325-335
• /
• 1999

The aim of the present study was to evaluate the relations among nutrient intake. self body image and satisfaction, and physical fitness of college students in Taegu. A total of 213 apparently healthy college students living in Taegu were selected for the study. The following anthropometric measurements were made on all participants : weight, height: waist and hip circumferences, and bioimpedence. Using weight and height, the body mass index (kg/$m^2$) was calculated. The 24-hour recall were obtained from subjects. Dietary habits and energy expenditure were examined through questionnaires. Nutrients intake were analyzed by computer aided nutritional analysis program. Variables of Physical fitness were consisted of body fat, muscular strength and endurance, agility. power, flexibility, cardiorespiratory function, physical efficiency index(PEI). Data were analyzed by computer using the SAS 6.12(Statistical Analysis System). The mean heights and weights of these students were similar to those reported for the 50th percentile in a national survey. Nutrient intake of the college students in Taegu was considerably lower than RDA. The male subjects' mean intake of two nutrients, vitamin B$_2$ and calcium, were less than 55% of the RDAs. the female subjects' mean intake of two nutrients, iron and calcium, were less than 55% of the RDAs. A most variables of physical fitness except sit and reach in male students showed a significant higher values than those of female students. There was a significant positive relationship between PEI and the intake of animal protein, fat, Ca. and B$_2$ in male students. Also there was a significant positive relationship between exercise duration of PWC 170 and protein, fat, iron, vitamin A, B$_2$, niacin, and energy intake in female students. The muscular strength showed the significant correlation with weight, height, and waist circumference in male and female students. The cardiorespiratory function and Physical efficiency index showed significantly negative correlation with tricep and subscapular skin thickness in the female students. There were significantly positive correlations between WHR and body efficiency index in male students, and significantly positive correlations between WHR and the cardiorespiratory function in female students. There was no significant level of correlation between the degree of satisfaction of body image and physical efficiency index. However. there was a significant positive correlation between waist circumference (and weight) and physical efficiency index in male and female students and almost all of the surveyed male and female college students wanted less waist circumference or weight even though they were in the criteria of standard waist circumference or weight. In conclusion, a beneficial effect of adequate nutrient intake on physical fitness was found, college students must increase their energy and nutrient intake if it is below than the RDA for improving their physical fitness.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.5
• /
• pp.725-731
• /
• 2008

The principal objective of this study was to assess the effects of low-calorie diets(LCD) for 8 weeks of medical nutrition therapy in individuals with BMI in excess of $23\;kg/m^2$. 41 over-weight or obese individuals (male=14, female=27, age $28.6{\pm}8.9\;yrs$), none of whom were diagnosed with a medical disease, were administered MNT 4 times over the study period. Approximately $1,100{\sim}1,300\;kcal/day$ were prescribed by a dietitian, via individualized counseling. Anthropometric parameters, daily nutrient intake, and blood levels of leptin, insulin, and lipid profiles were measured prior to and after the 8 weeks of the intervention period. We noted significant reductions in body weight, body mass index (BMI), fat mass (FM), visceral adipose tissue (VAT), abdominal skin-fold thickness, and waist circumference in both men and women. The mean body weight losses in men and women were $3.2{\pm}0.6\;kg$/8 weeks and $2.8{\pm}0.6\;kg$/8 weeks, respectively. However, the % of lean body mass (LBM) in men and women was shown to increase significantly (p<0.05). The daily intake of calorie, fat, protein, vitamin E, folate, and iron were significantly reduced during the LCD period. Blood levels of lipids and glucose were in normal range, and evidenced no changes after LCD. However, the serum levels of leptin in female subjects were significantly reduced (p<0.00l) from $8.9{\pm}4.8\;ng/mL$ to $6.9{\pm}4.8\;ng/mL$. In conclusion, 8 weeks of LCD with individualized counseling by a dietitian effectively reduced body fat and visceral fat in both men and women with BMI in excess of $23\;kg/m^2$.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.1
• /
• pp.33-40
• /
• 2012

This study was carried out to investigate the effect of the addition of lotus (Nelumbo nucifera) root and leaf powder on the quality characteristics of pork patties. The pork patties were of four types: nothing added (CTL), 0.5% lotus root powder added (LRP), 0.25% lotus root and 0.25% lotus leaf powder added (LRLP), and 0.5% lotus leaf powder added (LLP). There was no significant difference in $L^*$ value (whiteness), cohesiveness, gumminess, chewiness, water holding capacity, VBN content, and total bacterial amount. The moisture was highest in CTL, protein was highest in LRLP, fat was highest in LRLP and LLP, and ash was highest in LRLP (p<0.05). The total polyphenol content of the CTL, LRP, LRLP, and LLP were 3.34, 3.64, 3.90 and 3.90 mg/100 g, respectively. The $a^*$ value was highest in CTL, and the $b^*$ value of LRLP and LLP were higher than those of CTL and LRP (p<0.05). The hardness of CTL and LRP were higher than those of LRLP and LLP, and springiness was lowest in LLP (p<0.05). The cooking loss, thickness change, diameter changes, and pH were highest in CTL (p<0.05). The TBARS was highest in CTL, and was lowest in LLP (p<0.05).

• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.141-146
• /
• 2005

Ship have cutout inner bottom and girder and floor etc. Ship's structure is used much, and structure strength must be situated, but establish new concept when high stress interacts sometimes fatally the area. There is no big problem usually by aim of weight reduction, a person and change of freight, piping etc. Because cutout's existence grow up in this place, and, elastic buckling strength by load causes large effect in ultimate strength. Therefore, stiffened perforated plate considering buckling strength and ultimate strength is one of important design criteria which must examine when decide structural concept at initial design. Therefore, and, reasonable buckling strength about perforated stiffened plate need to ultimate strength limited design . Calculated ultimate strength varied several web height and cutout's dimension, and thickness in this investigated data. Used program(ANSYS) applied F.E.A code based on finite element method.

• Steel and Composite Structures
• /
• v.13 no.3
• /
• pp.239-258
• /
• 2012

In this paper, experimental investigations on high strength steel (HSS) stud connected steel-concrete composite (SCC) girders to understand the effect of shear connector density on their flexural behaviour is presented. SCC girder specimens were designed for three different shear capacities (100%, 85%, and 70%), by varying the number of stud connectors in the shear span. Three SCC girder specimens were tested under monotonic/quasi-static loading, while three similar girder specimens were subjected to non-reversal cyclic loading under simply supported end conditions. Details of casting the specimens, experimental set-up, and method of testing, instrumentation for the measurement of deflection, interface-slip and strain are discussed. It is found that SCC girder specimen designed for full shear capacity exhibits interface slip for loads beyond 25% of the ultimate load capacity. Specimens with lesser degree of shear connection show lower values of load at initiation of slip. Very good ductility is exhibited by all the HSS stud connected SCC girder specimens. It is observed that the ultimate moment of resistance as well as ductility gets reduced for HSS stud connected SCC girder with reduction in stud shear connector density. Efficiency factor indicating the effectiveness of high strength stud connectors in resisting interface forces is estimated to be 0.8 from the analysis. Failure mode is primarily flexure with fracturing of stud connectors and characterised by flexural cracking and crushing of concrete at top in the pure bending region. Local buckling in the top flange of steel beam was also observed at the loads near to failure, which is influenced by spacing of studs and top flange thickness of rolled steel section. One of the recommendations is that the ultimate load capacity can be limited to 1.5 times the plastic moment capacity of the section such that the post peak load reduction is kept within limits. Load-deflection behaviour for monotonic tests compared well with the envelope of load-deflection curves for cyclic tests. It is concluded from the experimental investigations that use of HSS studs will reduce their numbers for given loading, which is advantageous in case of long spans. Buckling of top flange of rolled section is observed at failure stage. Provision of lips in the top flange is suggested to avoid this buckling. This is possible in case of longer spans, where normally built-up sections are used.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.461-466
• /
• 2013

This paper examines the characteristics of butt welding joint shrinkage for shipbuilding and marine structures main plate. The shrinkage strain of butt welding joint which is caused by the process of heat input and cooling, results in the difference between dimensions of the actual parent metal and the dimensions of design. This, in turn, leads to poor quality in the production of ship blocks and reworking through period of correction brings about impediment on improvement of productivity. Through experiments on butt welding joint's shrinkage strain on large structures main plate, the deformation of welding residual stress in the form of I, Y, V was obtained. In addition, the results of experiments indicate that there is limited range of shrinkage in the range of 1 ~ 2 mm in 11t ~ 21.5t thickness and the effect of heat transfer of weld appears to be limited within 1000mm based on one side of seam line so there was limited impact of weight of parent metal on the shrinkage. Finally, it has been learned that Shrinkage margin needs to be applied differently based on groove phenomenon in the design phase in order to minimize shrinkage.

• Journal of the Korean Magnetics Society
• /
• v.16 no.6
• /
• pp.279-282
• /
• 2006

Magnetic tunnel junctions (MTJs), which consisted of amorphous ferromagnetic NiFeSiB free layers, were investigated. The NiFeSiB layers were used to substitute for the traditionally used CoFe and/or NiFe layers with the emphasis being given to obtaining an understanding of the effect of the amorphous free layer on the switching characteristics of the MTJs. $Ni_{16}Fe_{62}Si_{8}B_{14}$ has a lower saturation magnetization ($M_{s}:\;800\;emu/cm^{3}$) than $Co_{90}Fe_{10}$ and a higher anisotropy constant ($K_{u}:\;2700\;erg/cm^{3}$) than $Ni_{80}Fe_{20}$. The $Si/SiO_{2}/Ta$ 45/Ru 9.5/IrMn 10/CoFe $7/AlO_{x}/CoFeSiB\;(t)/Ru\;60\;(in\;nanometers)$structure was found to be beneficial for the switching characteristics of the MTJ, leading to a reduction in the coercivity ($H_{c}$) and an increase in the sensitivity resulted from its lower saturation magnetization and higher uniaxial anisotropy. Furthermore, by inserting a very thin CoFe layer at the tunnel barrier/NiFeSiB interface, the TMR ratio and switching squareness were improved more with the increase of NiFeSiB layer thickness up to 11 nm.

• Journal of the Korean Magnetics Society
• /
• v.21 no.2
• /
• pp.77-82
• /
• 2011

The use of soft magnetic materials have been increasing in the various industrial fields according to the increasing demand for high performance, automatic, miniaturing equipments in the recent our life. In this study, we investigated the effect of factors on the core loss and magnetic properties of electrical steel and soft magnetic composites. Furthermore, we reviewed the major efforts to reduce the core loss and improve the soft magnetic properties in the two main soft magnetic materials. Domain purification which results from reduced density of defects in cleaner electrical steels is combined with large grains to reduce hysteresis loss. The reduced thickness and the high electrical conductivity reduce the eddy current component of loss. Furthermore, the coating applied to the surface of electrical steel and texture control lead to improve high permeability and low core loss. There is an increasing interest in soft magnetic composite materials because of the demand for miniaturization of cores for power electronic applications. The SMC materials have a broad range of potential applications due to the possibility of true 3-D electromagnetic design and higher frequency operation. Grain size, sintering temperature, and the degree of porosity need to be carefully controlled in order to optimize structure-sensitive properties such as maximum permeability and low coercive force. The insulating coating on the powder particles in SMCs eliminates particle-to-particle eddy current paths hence minimizing eddy current losses, but it reduces the permeability and to a small extent the saturation magnetization. The combination of new chemical composition with optimum powder manufacturing processes will be able to result in improving the magnetic properties in soft magnetic composite materials, too.