• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.78-84
• /
• 2015

The purpose of this study is to evaluate the removal efficiency of phosphorus from synthetic waste water by reduction and oxidation reaction of Cu-Zn metal alloy. Cu-Zn metal alloy applied in this study is composed of 40% of Zn and 60% of Cu, which is so called Muntz metal. And the fibrous type of metal alloy has approximately $200{\mu}m$ of thickness. Metal is oxidized in an aqueous solution to generate electron and metal ion. The mechanism of phosphate treatment is co-precipitation of metal ion and phosphorous ion at various pH and temperature. The treatment efficiency showed the maximum at a one cycle treatment. This result means that the surface area of reaction material is sufficient enough to get reaction equilibrium. Experiment is conducted at various pH from 5 to 9, and showed the maximum efficiency at pH 8. Phosphorous is dominated as a type of $H_2PO_4{^-}$ and $HPO_4{^{2-}}$ at this pH condition. We could not consider the temperature effect independently, because phosphorous removal efficiency showed such a complex mechanism. We could get high efficiency at lower temperature in this research.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.4
• /
• pp.433-443
• /
• 2020

Objective : Osteoporosis is a disease of unbalanced bone metabolism that results in low bone mineral density with increased bone fragility and propensity for fractures. The increased rate of bone fracture due to osteoporosis places a significant burden on public health care expenditures. Therefore, numerous studies have been designed and performed to identify the drugs or health foods that can improve the bone quality or quantity. This study was designed to evaluate and analyze the therapeutic effects of rutin on histomorphometric values of the spine and femur in an osteoporotic mouse model induced by bilateral ovariectomy. Methods : Thirty female ICR mice (8 weeks old) underwent either a sham operation (only abdominal incision, sham group, n=10) or bilateral ovariectomy (n=20). The ovariectomized (OVX) animals were randomly divided into two groups : untreated OVX group (OVX-C, n=10), or rutin-administered group (OVX-R, n=10). The OVX-C group received weight-adjusted doses of saline vehicle and the OVX-R group received 50 mg/kg of rutin intraperitoneally, starting 1 day after surgery. At 4 and 8 weeks after surgery, serum estrogen, osteocalcin, alkaline phosphatase (ALP), and the telopeptide fragment of type I collagen C-terminus (CTX-1) were analyzed. Interleukin (IL)-1β, IL-6, IL-10, and tumor necrosis factor (TNF)-α were also analyzed. Bone histomorphometric parameters of the 4th lumbar vertebra and femur were determined by micro-computed tomography. Results : In OVX-C group, ALP, osteocalcin, CTX-1, IL-1β, IL-6, and TNF-α levels were significantly increased at 4 and 8 weeks compared to sham operation group. Rutin administration after OVX statistically significantly reduced ALP, CTX-1, IL-1β, IL-6, and TNF-α levels at 4 and 8 weeks. Rutin administration also improves bone histomorphometric parameters including trabecular bone volume fraction, trabecular thickness, and trabecular number. Trabecular separation was also decreased in OVX-R group compared to OVX-C group. Conclusion : The present study demonstrated that rutin has therapeutic effects on improving bone histomorphometric values in an OVX mouse model. The improvement in histomorphometric values may be associated with the reduction of osteoclastic activity via inhibition of IL-1β, IL-6, and TNF-α. In future studies, the mechanism for the effect of rutin on osteoporosis should be demonstrated more clearly to use rutin in human osteoporosis.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.10
• /
• pp.1466-1473
• /
• 2013

This experiment was conducted to study the variation laws and correlations of shearing force and feed characteristics including morphological characteristic, chemical composition and in situ degradability of wheat straw. Feasibility of evaluating the nutritional value of wheat straws with shearing force values was analyzed in this study. Six hundred wheat straw plants (Jimai 22) were randomly selected and placed in a cool and ventilated place. Samples were collected in the 1st, 15th, 30th, 45th, 60th d after harvest to measure shearing force, morphological characteristic, nutritional composition. Rumen degradation of dry matter (DM), neutral detergent fiber (NDF) and acid detergent fiber (ADF) of wheat straws were determined by the nylon bags method. The results demonstrated that linear and quadratic effects of storage time on all the tested morphological characteristics were significantly correlative (p<0.01). As storage time goes on, all the tested nutrients and their rumen degradations of wheat straw was linearly (p<0.01) and quadratic (p<0.01) correlative except ADF content and rumen degradation of ADF. Significant correlations were determined in linear effect of shearing force on morphological characteristics (p<0.01), and linear density and diameter were a more sensitive predictor than stem thickness for shearing force. There were strong correlations between storage time and all the measured physical characteristics (shearing force, morphological characteristics and shearing force standardized by morphological characteristics) (p<0.01). Nutrition compositions were linearly correlative with shearing force and standardized shearing force (p<0.01). The linear correlation between rumen degradation of DM and NDF and shearing force and standardized shearing force were evident (p<0.01). In conclusion, shearing force, nutrition compositions and their rumen degradation of wheat straw were still dynamic with storage time after harvest. Correlation could be found between shearing force and nutritional characteristics of wheat straw. Nutrient content, morphological index and rumen degradation of DM and NDF could be predicted by changes in shearing force. Shearing force should be applied according to a standardized storage time when it is used to forecast the feed value of wheat straws.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.10
• /
• pp.1425-1434
• /
• 2017

Objective: The main objective of this study was to determine the effect of different diets for early-weaned (EW) calves on rumen development, and how this affects fat deposition in the longissimus dorsi of adult Korean Hanwoo beef cattle. Methods: Three EW groups were established (each n = 12) in which two- week-old Hanwoo calves were fed for ten weeks with milk replacer+concentrate (T1), milk replacer+concentrate+roughage (T2), or milk replacer+concentrate+30% starch (T3); a control group (n = 12) was weaned as normal. At six months, 5 calves of each group were slaughtered and their organs were assessed and rumen papillae growth rates were measured. The remaining calves (n = 7 in each group) were raised to 20 months for further analysis. Results: Twenty-month-old EW calves had a higher body weight (BW), backfat thickness (BF), longissimus dorsi muscle area (LMA) and intramuscular fat (IMF) than the control (p<0.05). Organ growth, rumen histology, and gene expression patterns in the 6-month-old calves were positively related to the development of marbling in the loin, as assessed by ultrasound analysis (p<0.05). In the group fed the starch-enriched diet (T3), higher BW, BF, LMA, and IMF were present. The IMF beef quality score of 20-month-old cattle was 1+ for the T2 and T3 diets and 1 for the T1 diet (p<0.05). Conclusion: Papillae development was significantly greater in calves fed on high-concentrate diets and this may have resulted in the improved beef quality in the EW dietary groups compared to the control.

• Nutritional Sciences
• /
• v.9 no.2
• /
• pp.92-96
• /
• 2006

Studies were carried out to determine the effect of feeding diet containing 5% canola oil on growth, feed efficiency, and fatty acid profile of bacon in finishing pigs and of longissimus muscle in horses fattening for meat production. In experiment 1, twenty cross-bred barrows and twenty cross-bred gilts (average weight, 80 kg) were blocked by sex and weight, and five barrows or five gilts were allotted to one of eight pens $(6.25m^2/pen)$, respectively. Four pens (two with barrows and two with gilts) randomly selected were assigned to a control diet containing 5% tallow and the remaining four pens to a diet containing 5% canola oil. The average daily weight gain, daily feed intake and feed efficiency over a 6-wk feeding period were not different (p>0.05) between the two diets, nor was backfat thickness. Fatty acid profile in bacon fat showed that the 0-3 fatty acid ($\alpha-linolenic$ acid) content in pigs fed diet containing 5% canola oil was approximately three times (P<0.01) as much as in pigs fed tallow. In experiment 2, thirty-two Jeju horses (average $weight{\pm}SE,\;244{\pm}5kg$) were blocked by sex and weight, and two horses of the same sex and similar body weight were allotted to one $(15m^2/pen)$ of eight pens. Eight pens (four with males and four with females) selected randomly were assigned to a control diet containing 5% tallow and the remaining eight pens to a diet containing 5% canola oil. The average daily weight gain, daily feed intake and feed efficiency for concentrates without roughages over a 5-month feeding period were not different (P>0.05) between the two diet groups. Fatty acid profile in the muscle fat showed that the 0-3 fatty acid (a-linolenic acid) content in horses fed diet containing 5% canola oil was approximately two times (P<0.01) that in horses fed tallow. The increased (P<0.01) 0-3 fatty acid content in pigs and horses fed canola oil decreased the ratio of n-6 to n-3 fatty acids compared to the control, indicating a significant improvement in pork and horsemeat fatty acid profile for health benefit. Our study demonstrated that feeding diet containing 5% canola oil may help produce pork and horsemeat with more health benefit, increasing their $\alpha-linolenic$ acid content without deleterious effects on growth of pigs and horses.

• Journal of Bio-Environment Control
• /
• v.14 no.3
• /
• pp.160-165
• /
• 2005

Since the growth and quality of oak mushrooms are sensitively affected by environmental conditions, an adequate environmental control is very essential to improve the yield and quality under protected cultivation. In this study, the diameter, thickness, length and hardness of cap and stipe, the dry weight, fresh weight and moisture content of the mushrooms were analyzed under the environmental conditions such as night air temperatures (control, $5{\~}11^{\circ}C$ and $12{\~}18^{\circ}C$), relative humidities in the daytime (control, humidifying for 6 h and 12 h), and wind velocities (control, fan-operation for 6 h and 12 h). At a lower night temperature, the quality of the mushrooms was improved, and considered to be optimum at $3{\~}8^{\circ}C$ in terms of fresh weight and quality. At $70{\~}80{\%}$ of relative humidity in the daytime, the fresh weight was increased, but the quality decreased. Considering the quality, the relative humidity in the daytime is adequate at around $50{\%}$. At 6 h of maintaining the wind velocity at $1{\~}2\;my{\cdot}s^{-1}$, the growth and quality were better, but the lightness became higher at 12 h although the fresh weight was reduced by evaporation. It is concluded that even though both of the yield and quality are not easily improved at a same time, optimum approaches should be required by using the relationship among environmental factors and the growth and quality.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.362-362
• /
• 2014

Atomic layer deposition (ALD) can be regarded as a special variation of the chemical vapor deposition method for reducing film thickness. ALD is based on sequential self-limiting reactions from the gas phase to produce thin films and over-layers in the nanometer scale with perfect conformality and process controllability. These characteristics make ALD an important film deposition technique for nanoelectronics. Tantalum pentoxide ($Ta_2O_5$) has a number of applications in optics and electronics due to its superior properties, such as thermal and chemical stability, high refractive index (>2.0), low absorption in near-UV to IR regions, and high-k. In particular, the dielectric constant of amorphous $Ta_2O_5$ is typically close to 25. Accordingly, $Ta_2O_5$ has been extensively studied in various electronics such as metal oxide semiconductor field-effect transistors (FET), organic FET, dynamic random access memories (RAM), resistance RAM, etc. In this experiment, the variations of chemical and interfacial state during the growth of $Ta_2O_5$ films on the Si substrate by ALD was investigated using in-situ synchrotron radiation photoemission spectroscopy. A newly synthesized liquid precursor $Ta(N^tBu)(dmamp)_2$ Me was used as the metal precursor, with Ar as a purging gas and $H_2O$ as the oxidant source. The core-level spectra of Si 2p, Ta 4f, and O 1s revealed that Ta suboxide and Si dioxide were formed at the initial stages of $Ta_2O_5$ growth. However, the Ta suboxide states almost disappeared as the ALD cycles progressed. Consequently, the $Ta^{5+}$ state, which corresponds with the stoichiometric $Ta_2O_5$, only appeared after 4.0 cycles. Additionally, tantalum silicide was not detected at the interfacial states between $Ta_2O_5$ and Si. The measured valence band offset value between $Ta_2O_5$ and the Si substrate was 3.08 eV after 2.5 cycles.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.363-363
• /
• 2014

Ruthenium (Ru) has attractive material properties due to its promising characteristics such as a low resistivity ($7.1{\mu}{\Omega}{\cdot}cm$ in the bulk), a high work function of 4.7 eV, and feasibility for the dry etch process. These properties make Ru films appropriate for various applications in the state-of-art semiconductor device technologies. Thus, it has been widely investigated as an electrode for capacitor in the dynamic random access memory (DRAM), a metal gate for metal-oxide semiconductor field effect transistor (MOSFET), and a seed layer for Cu metallization. Due to the continuous shrinkage of microelectronic devices, better deposition processes for Ru thin films are critically required with excellent step coverages in high aspect ratio (AR) structures. In these respects, atomic layer deposition (ALD) is a viable solution for preparing Ru thin films because it enables atomic-scale control of the film thickness with excellent conformality. A recent investigation reported that the nucleation of ALD-Ru film was enhanced considerably by using a zero-valent metallorganic precursor, compared to the utilization of precursors with higher metal valences. In this study, we will present our research results on the synthesis and characterization of novel ruthenium complexes. The ruthenium compounds were easy synthesized by the reaction of ruthenium halide with appropriate organic ligands in protic solvent, and characterized by NMR, elemental analysis and thermogravimetric analysis. The molecular structures of the complexes were studied by single crystal diffraction. ALD of Ru film was demonstrated using the new Ru metallorganic precursor and O2 as the Ru source and reactant, respectively, at the deposition temperatures of $300-350^{\circ}C$. Self-limited reaction behavior was observed as increasing Ru precursor and O2 pulse time, suggesting that newly developed Ru precursor is applicable for ALD process. Detailed discussions on the chemical and structural properties of Ru thin films as well as its growth behavior using new Ru precursor will be also presented.

• Korean Journal of Materials Research
• /
• v.10 no.7
• /
• pp.482-488
• /
• 2000

The deposition characteristics of Cu film by MOCVD using (hfac)Cu(1,5-COD)(1,1,1,5,5,5-hexafluro-2,4-pentadionato Cu(I) 1,5-cryclooctadiene) as a precursor have been investigated in terms of substrate conditions. Two different substrates such as air-exposed TiN and non-contaminated TiN were used for the MOCVD of Cu. MOCVD of Cu on the air-exposed TiN affected the nucleation rate of Cu as well as its growth, resulting in the Cu films having poor interconnection between particles with relatively small grains. On the other hand, in-situ MOCVD of Cu led to the Cu films having a significantly improved interconnection between particles with larger grains, indicating the resistivity as low as $2.0{\mu}{\Omega}-cm$ for the films having more than 1900$\AA$ thickness. Moreover, better adhesion of Cu films to the TiN by using in-situ MOCVD has been obtained. Finally, initial coalescence mechanism of Cu was suggested in this paper in terms of different substrate conditions by observing the surface morphology of the Cu films deposited by MOCVD.

• Restorative Dentistry and Endodontics
• /
• v.27 no.5
• /
• pp.535-542
• /
• 2002

The purpose of this study was to evaluate the effect of EDTA irrigant according to application time and temperature. 31 human mature extracted teeth with a single canal were sectioned with microtome in 3mm thickness and gained 62 samples of root canals. They were distributed randomly into 6 groups of 10 specimens each and control group of 2 specimens. Each specimen was prepared with GT rotary file (Dentsply, Maillefer Co., Swiss) and irrigated with 3 ml sodium hypochlorite every minute. Then smear layer was removed with EDTA solution (PULPDENT$^{\circledR}$, PULPDENT Co., USA.) except two control specimens. Specimens of each group were irrigated with 17% EDTA. The time and temperature of application were as follows : (Table omitted) All specimens were split longitudinally and prepared for examination by scanning electron microscopy. A set of reference micrographs was used to award a debris score as follows: 0 = no smear layer, all tubules clean and open; 1 = no superficial smear layer, tubule openings visible, but some contain debris plug or soft tissue remnants: 2 = moderate smear layer, some tubules open and others closed; 3 = heavy smear layer, most/all tubule openings obscured. Results were evaluated with Kruskal-Wallis test to determine whether there was statistically significant difference among six groups. Pairs of groups were analyzed using the Student-Newman-Keuls Method and Mann-Whitney test. The results were as follows : 1. Control specimens showed heavy smear layer at the canal walls 2. Among the groups applied with EDTA for 2 minutes, group 1 showed the heaviest smear layer, and there was statistically significant difference between group 1 and the other groups(p<0.05). 3. Among the groups applied with EDTA for 5 minutes, group 4 and group 6 showed smear layer but there was no significant difference between them. 4. Among the groups applied with EDTA for the same temperature, group 1 showed heavier smear layer than group 4, and there was statistically significant difference(p<0.05). 5. Among the groups applied with EDTA for the same temperature, group 2 showed heavier smear layer than group 5 and group 3 showed heavier smear layer than group 6. But there was no statistically significant difference among them. From the results above, it could be concluded, EDTA solution is effective in removing of smear layer when it is applied for 5 minutes. If EDTA is applied for 2 minutes, it should be applied above room temperature.