• Advances in materials Research
• /
• 제12권2호
• /
• pp.83-100
• /
• 2023

In this paper, sandwich plate, constructed with orthotropic and isotropic composite materials, is analyzed to obtain the static and harmonic behavior. The analysis is done by using ANSYS APDL FEM tool. A solid-shell 190 and an 8-node solid 185 elements are employed for face and core material respectively to analyze the plate. Results was attained by using Reissner-Mindlin theory. Effect of increasing thickness ratio of face sheet to depth of the plate is presented on static, vibration and harmonic response on the sheet and the results are discussed briefly. Published work in open domain was used to validate the results and observed excellent agreement. It can be stated that proposed model presents results with remarkable accuracy. Results are obtained to reduce the weight of the plate and minimizing the vibration amplitudes.

• 한국터널지하공간학회 논문집
• /
• 제16권6호
• /
• pp.599-614
• /
• 2014

TBM으로 시공되는 터널은 기계에 의해 전단면 굴착(full face tunnelling)이 이루어지므로, 굴착면에 접근하는 것이 매우 제한적이다. 이러한 한계를 극복하고 TBM 터널에서 굴착면 전방의 지반상태를 정확히 예측할 수 있는 기술은 매우 드물다. 본 연구는 TBM에서 전기비저항을 사용하여 굴착면 전방의 이상지반을 예측할 수 있는 TBM 비저항 예측(TRP)시스템을 개발하고, TBM 현장에서의 적용성과 예측 정확성을 검증하기 위해 EPB 쉴드 TBM으로 시공 중인 지하철 터널에서 현장 실험을 수행하였다. TBM 비저항 예측 시스템은 전극을 사용하여 지반의 전기비저항을 측정하고, 이를 바탕으로 역해석을 수행하여, 이상지반의 위치와 두께 및 전기적 특성을 예측한다. 전극이 부착된 강관을 유압으로 굴착면에 압입하여, 전극이 지반과 완전히 접촉하도록 장치를 제작하였다. 또한, 전극이 챔버 내부를 관통하여 나아가도록 하는 동시에 토사유출을 방지하도록 설계하여 현장에서의 전방예측을 가능하게 하였다. 1차 실험 결과, 굴착면 근접 지반과 굴착면 전방 지반의 전기비저항 및 유전율이 동일하게 나타나 이상지반이 존재하지 않음을 예측하였다. 2차 실험 결과, 굴착면 전방 약 1 m 지점부터 상대적으로 낮은 유전율 비를 가지는 이상지반 구간이 약 5 m 길이로 존재함을 예측하였다. 이는 각각 지표에서 물리탐사 또는 시추를 통해 조사된 지반상태 및 TBM 굴착 중 예측 구간에서 반출되었던 버력을 관찰한 기록과 잘 일치하였다.

• 복식
• /
• 제57권2호
• /
• pp.143-154
• /
• 2007

This study's purpose is how express gender image according to sex in editorial fashion photography. This study's objectives are the women's magazine Vogue, Harper's Bazaar and man's magazine GQ, Esquire published 2000-2005 within the country. The photography was classified with established a standard based on the precede studies. The photo is classified Gender image according to dress and its ornaments, model character and atmosphere by Sex Expression of femininity woman has exposure of body parts and emphasizing thin eyebrows and red lips, soft and mild image, modest and static pose. Man expressed femininity used ladylike color and pattern, erotic exposure of body and long hair style. Commonly emphasizing red lips, natural background of flower plant, S-line. For expression of masculinity man and woman are used masculinity item, short hair-style and thick eyebrows. And also emphasize square like chin and shoulder. Specially, woman used direct silhouette to conceal soft body curved line. The expressions of androgynous woman and man are colorful dress and make-up. Woman emphasized male face to show and man expressed soft image through hull of abundant material of fur. All two sex selected method that conceal body curved line and face to express sexless. Hiding characteristics of body and face make indistinct of sex. The gender is affected by atmosphere such as model and illumination background as much as clothes because of the editorial fashion photography.

• Structural Engineering and Mechanics
• /
• 제57권3호
• /
• pp.473-506
• /
• 2016

The aim of this work is the development of a 2D quadrilateral isoparametric finite element model, based on a layerwise approach, for the bending analysis of sandwich plates. The face sheets and the core are modeled individually using, respectively, the first order shear deformation theory and the third-order plate theory. The displacement continuity condition at the interfaces 'face sheets-core' is satisfied. The assumed natural strains method is introduced to avoid an eventual shear locking phenomenon. The developed element is a four-nodded isoparametric element with fifty two degrees-of-freedom (52 DOF). Each face sheet has only two rotational DOF per node and the core has nine DOF per node: six rotational degrees and three translation components which are common for the all sandwich layers. The performance of the proposed element model is assessed by six examples, considering symmetric/unsymmetric composite sandwich plates with different aspect ratios, loadings and boundary conditions. The numerical results obtained are compared with the analytical solutions and the numerical results obtained by other authors. The results indicate that the proposed element model is promising in terms of the accuracy and the convergence speed for both thin and thick plates.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.183-188
• /
• 2002

In locations where the cost or concrete is relatively high, or in situations where the weight or concrete members is to be kept to a minimum, it may be economical to use hollow reinforced concrete vertical members. Hollow reinforced concrete columns with low axial load, moderate longitudinal steel percentage, and a reasonably thick wall were found to perform in a ductile manner at the flexural strength, similar to solid columns. However, hollow reinforced concrete columns with high axial load, high longitudinal steel percentage, and a thin wall were found to behave in a brittle manner at the flexural strength, since the neutral axis is forced to occur away from the inside face of the tube towards the section centroid and, as a result, crushing of concrete occurs near the unconfined inside face of the section. If, however, a steel tube is placed near the inside face of a circular hollow column, the column can be expected not to fail in a brittle manner by disintegration of the concrete in the compression zone. Design recommendation and example by moment-curvature analysis program for curvature ductility are presented. Theoretical moment-curvature analysis for reinforced concrete columns, indicating the available flexural strength and ductility, can be conducted providing the stress-strain relation for the concrete and steel are known. In this paper, a unified stress-stain model for confined concrete by Mander is developed for members with circular sections.

• Composites Research
• /
• 제18권6호
• /
• pp.19-25
• /
• 2005

본 논문에서는 하이브리드 복합재 틸팅차량 차체에 대한 시험적 연구를 수행하였다. 시험에 적용된 하이브리드 복합재 틸팅차량 차체는 길이가 23m이며 40mm두께의 알루미늄 하니콤 코어와 2mm의 직조된 탄소/에폭시 면재로 구성된 샌드위치 구조물이다. 하이브리드 복합재 틸팅차량 차체의 구조적 거동과 안전성을 규명하기 위해 수직하중- 차단압축하중, 비틀림하중 및 3점지지 하중조건하에서 정적인 하중시험을 수행하였다. 시험은 JIS E 7105규격에 근거하여 수행되었다. 시험을 통해 수직하중하에서 최대처짐은 최대 12.3mm이며 굽힘강성은 $0.81\times10^{14}\;kgf{\cdot}mm^2$로 도시철도차량성능기준을 만족하고 있었다. 또한 강도 측면에서도 탄소/에폭시 면재의 파단변형률의 $20\%$ 이내로 안전도를 만족하였다.

• Journal of Magnetics
• /
• 제12권3호
• /
• pp.118-123
• /
• 2007

We have studied the effect of Au-Cu back layer system ${\sim}10{\AA}$ thick on the properties of a spin valve. The back layers were Cu, Au, co-sputtered $Cu_xAu_{1-x}$, laminated $[Au/Cu]_n$. and bi-layer [Au/Cu]. When Au was added to the Cu, the resistance of the spin valve abruptly increased most likely due to impurity scattering. The GMR values were not increased significantly for all the structures. In the case of co-sputtered $Cu_xAu_{1-x}$, the changes in the resistance, ${\Delta}R$, was increased at a composition of ${\sim}Au_{0.5}Cu_{0.5}$. This increase in ${\Delta}R$ is due to increase in the resistance and not from the enhanced spin-dependent scattering. The structural analyses showed that the orthorhombic $Au_{0.5}Cu_{0.5}$ was formed in the back layer instead of the face-centered tetragonal $Au_{0.5}Cu_{0.5}$ as we expected. Thermal annealing over $400^{\circ}C$ may be required to have face-centered tetragonal in the $10{\AA}$ thick ultra-thin film. In the case of a laminated or bi-layered back layer, the properties of the spin valve were improved, which may be attributed to the increase in the mean free path of conduction electrons.

• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.300-307
• /
• 2002

Partial penetration welding joint is defined as groove welds welded from one side, without steel backing or groove welds welded from both sides but without back gouging. So it has an unwelded portion at the root of the weld. Study of partial penetration weldment fracture behavior includes residual stress analysis and fracture analysis. The J-integral loses its path independency in residual stress field. Therefore, it is necessary to introduce a new J-integral, J, which is defined including the effect of plastic deformation and thermal strain. In this study, theoretical formulation and program were developed for the evaluation of J-integral for the crack tip located in the weldment. Evaluations of fracture behavior were performed for partial penetration multi-pass weldment of 25.4mm thick plate by J-integral. From a point of fracture in partial penetration multi-pass welding, it seemed to be better to control root face smaller than 6.35mm.

• 패션비즈니스
• /
• 제10권4호
• /
• pp.78-94
• /
• 2006

The purpose of this study is to analyze and to compare the makeup style and the ideal beauty of the Renaissance and the Baroque by examining the portraits. The result of this study is as follows. Firstly, as for the Renaissance makeup, they preferred a broad forehead and thin eyebrows. The color for lips and cheeks makeup was orange and light orange in fashion. Secondly, as for the Baroque makeup, they preferred a broad face with double chin, dark and thick eyebrows and small lips. The color for lips and cheeks was reddish and clear. Finally, as for comparison the these ages, the Renaissance ideal beauty was a little plentiful women with a broad forehead, thin eyebrow. But the Baroque ideal beauty was totally plentiful women with thick eyebrows, clear reddish lips and cheeks. The color of lips and cheeks was more reddish and clear in Baroque. The Baroque women had the smaller lips than the Renaissance women and they are more plentiful and modern with a flourish than the others.

• 대한기계학회논문집A
• /
• 제29권11호
• /
• pp.1551-1559
• /
• 2005

This paper explains manufacturing process and experimental studies on a composite carbody of Korean tilting train. The composite carbody with length of 23m was manufactured as a sandwich structure composed of a 40mm-thick aluminium honeycomb core and 5mm-thick woven fabric carbon/epoxy face. In order to evaluate structural behavior and safety of the composite carbody, the static load tests such as vertical load, end compressive load, torsional load and 3-point support load tests have been conducted. These tests were performed under Japanese Industrial Standard (JIS) 17105 standard. From the tests, maximum deflection was 12.3mm and equivalent bending stiffness of the carbody was 0.81$\times$10$^{14}$ kgf$\cdot$mm$^{2}$ Maximum stress of the composite body was lower than 12.2$\%$ of strength of the carbon/epoxy. Therefore, the composite body satisfied the Japanese Industrial Standard.