• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.9
• /
• pp.1013-1019
• /
• 2007

Electronic wastes have increased tremendously. However, any reliable treatment methodologies have rarely been established. Electronic wastes have posed serious disposal problem due to their physico-chemical stability. This paper investigated the application possibility of pyrolysis for the purpose of recycling the p-CCL(phenol based Copper Clad Laminate). Thermogravimetric analysis(TGA) was used to investigate the thermal decomposition pattern of p-CCL. We elucidated the characteristics of pyrolysis by-products at operating temperatures of 280, 350 and $600^{\circ}C$. GC/MS and FT-IR were used to characterize the liquid by-products along with general characterization methods such as Ultimate Analysis, Proximate Analysis and Heating Value, whereas general characterization methods were only introduced for the solid by-products. At a heating rate of $5^{\circ}C$/min, TGA curves exhibited three decomposition stages: (1) low-temperature decomposition region$(<280^{\circ}C)$, (2) medium temperature region$(280\sim350^{\circ}C)$ and (3) high-temperature region$(>350^{\circ}C)$. The major compounds of liquid by-products at low- and medium-temperatures were accounted for by water and phenol, whereas branched phenols and furans were major compounds at high-temperatures. As the temperature increases, volatile quantities decreased but the fixed carbon increased. High heating values of solid by-products($7,400\sim7,600$ kcal/kg) would suggest that the solid by-products could be applicable as fuel. In addition, high fixed carbon but low ash content of the solid by-products offered an implication that they are capable of being upgradable for adsorbent after applying appropriate activating process.

• Journal of the Korean Chemical Society
• /
• v.39 no.3
• /
• pp.163-175
• /
• 1995

Metal free phthalocyanine($H_2Pc$) partially doped with iodine, $H_2Pc(I)x$, has been made to improve photosensitizing efficiency of ZnO/$H_2Pc$. The content of iodine dopant level(x) for $H_2Pc(I)x$ upon $H_2Pc$ polymorphs was characterized as ${\chi}-H_2Pc(I)_{0.92}$ and ${\beta}-H_2Pc(I)_{0.96}$ by elemental analysis. Characterization of iodine-oxidized $H_2Pc$ were investigated by TGA (thermogravimetric analysis), UV-Vis, FT-IR, Raman and ESR (electron spin resonance) spectrum, and the adsorption properties of $H_2Pc(I)x$ on ZnO were characterized by means of Raman and ESR studies. TGA for $H_2Pc(I)x$ showed a complete loss of iodine at approximately 265$^{\circ}C$ and the Raman spectrum of $H_2Pc(I)x$ and ZnO/$H_2Pc(I)x$ at 514.5 nm showed characteristic $I_3^-$ patterns in the frequency region 90∼550 $cm^{-1}$. ZnO/$H_2Pc(I)x$ exhibited a very intense and narrow ESR signal at $g=2.0025{\pm}0.0005$ compared to $H_2Pc$/ZnO. Iodine doped ZnO/$H_2Pc(I)x$ showed a better photosensitivity compared to iodine undoped ZnO/$H_2Pc$. That is, the surface photovoltage of ${\chi}-H_2Pc(I)_{0.92}$/ZnO was approximately 31 times greater than that of ZnO/${\chi}-H_2Pc$ and ZnO/${\beta}-H_2Pc(I)_{0.96}$ was 5 times more efficient than ZnO/${\beta}-H_2Pc$ at 670 nm. And the dependence of photosensitizing effect upon $H_2Pc$ polymorphs was exhibited that the surface photovoltage of ZnO/${\chi}-H_2Pc(I)_{0.92}$ was approximately 5 times greater than ZnO/${\beta}-H_2Pc(I)_{0.96}$ at 670 nm. Therefore Iodine doping of H_2Pc$ resulted in increase in photoconductivity of $H_2Pc$ and photovoltaic effect of ZnO/$H_2Pc$ in the visible region.

• Journal of the Society of Disaster Information
• /
• v.10 no.1
• /
• pp.71-83
• /
• 2014

This study carried out an experiment in order to compare thermal characteristics after collecting dust generated in the process of disposing of waste tire, plywood flour in the process of manufacturing plywood, salicylic acid dust in the process of manufacturing functional soap, and dust in the process of manufacturing wheat powder, which has potential fire and explosion hazard. According to the results of experiment, the analysis showed that all samples subject to the experiment were in the condition where heat flux decreased and temperature decreased as the quantity of added talc was increased. This shows that decomposition rate decreased, and hazard decreased. However, in all of samples subject to the experiment, as heating rate increased, endothermic onset temperature moved to the low-temperature part, and the amount of absorbed heat was largely increased. This showed that the decomposition hazard of sample increased as heating rate increased, according to the analysis. Besides, TGA experiment results showed that thermal stability was secured because total weight loss decreased as the amount of talc was increased for all samples subject to the experiment regarding the ratio of weight loss. It is expected that the continuous research and supplementation of dust explosion mechanism in the future will contribute to the establishment of measures for the effective dust explosion prevention.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2597-2603
• /
• 2013

The reactions of hydrated $CdCl_2$, $MnCl_2$, and $NiCl_2$ with 2,2'-bipyidine-3,3',6,6'-tetracarboxylic acid ($H_4bptc$) afforded the mononuclear [$Cd^{II}(H_2bptc)(H_2O)_3]{\cdot}H_2O$ (1), linear $\{[Cd(H_2bptc)(H_2O)]{\cdot}3H_2O\}_n$ (2), 3-D heterobimetallic $[NaCd(Hbptc)(H_2O)]$ (3), layer $[Mn(H_2bptc)(H_2O)]_n$ (4) and a dinuclear compound $[Ni_2(H_2bptc)-(H_2O)_2]{\cdot}6H_2O$ (5). These compounds have been characterized by elemental analysis, IR, and their structures have been determined by X-ray crystallography. The thermal stabilities of 1-3 were measured by thermogravimetric analysis (TGA) and their solid state luminescence properties together with the free ligand $H_4bptc$ were investigated at room temperature.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2774-2780
• /
• 2013

Two new isostructural dinuclear complexes, $Ln_2(4-cpa)_6(bpy)_2$ (Ln = Eu (1); Tb (2), 4-cpa = 4-chlorophenylacetate, bpy = 2,2'-bipyridine), have been hydrothermally synthesized and characterized by IR spectroscopy, elemental analysis, thermogravimetric analysis (TGA), powder X-ray diffraction and single-crystal X-ray diffraction. The lanthanide ions are bridged by two bidentate and two terdentate carboxylate groups to give centrosymmetric dimers with $Ln{\cdots}Ln$ separations of 3.967(2) and 3.956(3) ${\AA}$, respectively. Each metal atom is nine-coordinate and exhibits a distorted tricapped trigonal prismatic geometry. Three-dimensional fluorescence spectra show that both 1 and 2 emit bright red and green luminescence at room temperature, with long lifetimes of up to 0.369 ms (at 614 nm) and 0.432 ms (at 543 nm), respectively. Moreover, poor luminescence efficiency has been noted for complex 2. The 4-Hcpa ligand and complexes 1-2 have been screened for their phytogrowth-inhibitory activities against Brassica napus L. and Echinochloa crusgalli L., and the results are compared with the activity of quizalofop-P-ethyl.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.105-114
• /
• 2004

This study investigated the thermal behavior of the nuclear graphite waste generated from the decommissioning of the Korean nuclear research reactor, The first part study investigated the decomposition rate of the nuclear graphite waste up to $1000^{\circ}C$ under various oxygen partial pressures using a thermo-gravimetric analyzer (TGA). Tested graphite waste sample not easily destroyed in the oxygen-deficient condition. However, the gas-solid oxidation reaction was found to be very effective in the presence of oxygen. No significant amount of the product of incomplete combustion was formed even in the limited oxygen concentration of 4% $O_2$. The influence of temperature and oxygen partial pressure was evaluated by the theoretical model analysis of the thermo-gravimetric data. The activation energy and the reaction order of graphite oxidation were evaluated as 128 kJ/mole and 1.1, respectively. The second part of this study investigated the behavior of radioactive elements under graphite oxidation atmosphere using thermodynamic equilibrium model. $^{22}Na$, $^{134}Cs$ and $^{137}Cs$ were found be the semi-volatile elements. Since volatile uranium species can be formulated at high temperatures above $1050^{\circ}C$, the temperature of incinerator furnace should be minimized. Other corrosion/activation products, fission products and uranium were found to be the non-volatile species.

• Textile Coloration and Finishing
• /
• v.28 no.4
• /
• pp.239-245
• /
• 2016

In this study, carbon/phenol composites were prepared from carbon fiber preform and phenol resin by RTM(resin transfer molding) process. And changes in the properties of the composite according to the pre-treatment of phenol resin was mainly studied. RTM process conditions were deduced from viscosity and thermal analysis of phenol resin which were rheometer and thermogravimetric analyzer(TGA). RTM process was performed under various injection and molding temperature. Characterization of the prepared C/P composites were evaluated by various analysis. Morphology of composites was analyzed by Micro-CT(MCT), Mechanical properties of composites were measured through the flexural properties. As results, volatile impurities of phenol resin were effectively removed at resin pre-treatment temperature of $100^{\circ}C$ and composite was sufficiently cured at molding temperature of $180^{\circ}C$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.64.1-64.1
• /
• 2011

LCD 디스플레이 등에 사용되는 글래스 패널 위에 bare si die를 직접 실장하는 COG 플립칩 패키지의 경우 Au 범프와 ITO 패드 간의 전기적 접속 및 접합부 신뢰성 확보를 위해 접속소재로서 ACF (anisotropic conductive film)가 사용되고 있다. 그러나 ACF는 고가이고 접속피치 미세화에 따라 브릿지 형상에 의한 쇼트 등의 문제가 발행할 수 있어 NCP (non-conductive paste)의 상용화가 요구되고 있다. 본 연구에서는 NCP를 적용한 COG 패키지에 있어서 온도, 압력 등의 열압착 본딩 조건과 NCP 물성이 Au-ITO 접합부의 전기적 및 기계적 특성에 미치는 영향을 조사하였다. NCP는 에폭시 레진과 경화제, 촉매제를 사용하여 다양하게 포뮬레이션을 하였고 DSC (Differential Scanning Calorimeter), TGA (Thermogravimetric Analysis), DEA (Dielectric Analysis) 등의 열분석장비를 이용하여 NCP의 물성과 경화 거동을 확인하였다. 테스트 베드는 면적 $5.2{\times}7.2\;mm^2$, 두께 650 ${\mu}m$, 접속피치 200 ${\mu}m$의 Au범프가 형성된 플립칩 실리콘 다이와 접속패드가 ITO로 finish된 글래스 기판을 사용하였다. 글래스 기판과 실리콘 칩은 본딩 전 PVA Tepla사의 Microwave 플라즈마 장비로 Ar, $O_2$ 플라즈마 처리를 하였으며, Panasonic FCB-3 플립칩 본더를 사용하여 본딩하였다. 본딩 후 접합면의 보이드를 평가하고 die 전단강도로 접합강도를 측정하였다.

• Journal of Information Display
• /
• v.10 no.3
• /
• pp.125-130
• /
• 2009

The new organic semiconductor, which is composed of a divinylbenzene core unit and alkoxynaphthalene on both sides, 1,4-bis-2-(6-hexyloxy)naphthalen-2-yl-vinylbenzene, was synthesized via Wittig reaction. The obtained oligomer was characterized via FT-IR, mass and elemental analysis, UV-visible spectroscopy, cyclovoltammetry, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The vacuum-evaporated film was characterized via X-ray diffraction and atomicforce microscopy (AFM). It formed a highly ordered polycrystalline vacuum-evaporated film and exhibited a good field-effect performance, with a hole mobility of $0.015cm^2/V{\cdot}s$, an on/off ratio of $1.18{\times}10^5$, and a subthreshold slope of 0.69 V when it was deposited at Ts=$90^{\circ}C$ on HMDS-treated $SiO_2$.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.62-62
• /
• 2010

PVC(Polyvinyl Chloride)와 HDPE(High-density Polyethlene) 하수도관은 수많은 고분자 재료 중에도 높은 기계적 강도를 가지며, 광범위하게 사용되고 있다. 하지만, PVC와 HDPE 하수관을 연결하기 위해 소모 접착제나 고무링 이용한 소켓 방법 이음 방법은 낮은 수밀성과 기계적 강도로 오 폐수의 누수가 발생되고, 이것이 흙에 스며들어 지하수, 하천 및 토양을 오염시키고 있다. 따라서, 대안으로 최근에는 열판을 이용한 맞대기 융착 용접을 PE 하수도 관에 제한적으로 적용하여 시공하고 있다. 그러나, PVC 하수관은 열을 가할 시 열에 의한 민감한 거동으로 인해 맞대기 융착 용접법이 적용되지 못하고 있는 실정이다. 따라서 본 연구에서는 하수도 관 중, 국내에서 가장 많이 사용되고 있는 내 충격 PVC 하수도관과 HDPE 이중 벽관의 DSC(Diffential Scanning Calorimeter), TGA(Thermogravimetric analyzer), TMA(Thermomechanical Analysis), DMA(Dynamic Mechanical Analysis) 분석으로 온도에 따른 열적 거동을 분석하여, 적절한 융착 온도 조건을 제시하였다. 또한 접합강도 향상을 위한 이음부 설계를 제안하여, 융착 용접 특성을 평가하였다.