• 한국정밀공학회지
• /
• 제32권11호
• /
• pp.953-960
• /
• 2015

The thermoforming process has been widely used to manufacture medium- and large-sized plastic parts because of the relatively low cost and high productivity, as compared with other plastic forming processes. One of current salient issues of thermoforming industries is the reduction of trial and error during the production of the thermoformed product. Hence, there is a significant increasing interest in the thermoforming analysis by the thermoforming industries. The goal of this paper is to investigate a methodology of the three-dimensional thermoforming analysis for medium- and large-sized plastic parts. There is a discussion about methodologies of thermoforming analysis, as well as material modeling, and three-dimensional finite element analysis. Furthermore, there is an examination, through case studies, about the applicability of the proposed methodology concerning the thermoforming analysis.

• 대한기계학회논문집A
• /
• 제40권5호
• /
• pp.505-511
• /
• 2016

이 연구에서는 3차원 진공 열성형 해석을 통하여 3개의 캐비티를 가지는 냉장고 내상의 진공 열성형 특성을 분석/고찰 하고자 한다. 3개의 캐비티를 가지는 냉장고 내상 금형의 3차원 모델을 이용하여 냉장고 내상 제품의 기초 성형성을 분석하였다. 고온 인장시험을 수행하여 진공 열성형 재료에 대한 물성데이터 도출과 재료 특성 분석을 하였다. 3개의 캐비티를 가지는 냉장고 내상의 열성형 공정의 세부 공정들을 설계하고 세부 공정들에 적합한 유한요소해석 모델을 개발하였다. 각 세부 공정들에 대한 3차원 유한요소해석을 수행하여 제품의 변형 형상 및 두께 분포를 분석하였다. 최종적으로 3개의 캐비티를 가지는 냉장고 내상의 성형성과 진공 열성형 특성을 고찰하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.281-284
• /
• 2008

Film insert melding is one of the surface processes that enhances functional or aesthetic qualities of an existing product's surface. In general, film insert molding consists of three processes including thermoforming, trimming and injection molding. Thermoforming, which is the first process of film insert molding, is the most important process because the variation of film thickness has an effect on the mold design and process conditions for the subsequent processes, that are, trimming and injection molding. This study is focused on predicting the film thickness distribution through film insert thermoforming process using commercial FEM code. In order to describe rheological behavior of thermoplastic film (ABS), G'Sell's viscoelastic constitutive law was adopted. The numerical model of film insert thermoforming was established, and the simulation to predict film thickness distribution was performed. Comparison between the results of simulation and experiment was made to validate the proposed finite element analysis.

• 한국정밀공학회지
• /
• 제29권9호
• /
• pp.946-957
• /
• 2012

The objective of this paper is to investigate into the development of a thin flat panel photo-bioreactor case with characteristics shapes. The thin flat panel photo-bioreactor case was designed to be manufactured from a plastic thermoforming process. A proper design with a relatively high rigidity was obtained through the structural analyses for different designs of the photo-bioreactor case. The thermoforming analyses were performed. From the results of the thermoforming analyses, a proper forming condition and the formability of the designed plastic photo-bioreactor case were estimated. The thermoforming moulds for the flat panel photobioreactor cases were manufactured. The thermoforming experiments were performed to examine the manufacturability of the designed flat panel photo-bioreactor cases. From the results of the thermoforming experiments, it was shown that thin flat panel photo-bioreactor cases with characteristic shapes can be manufactured from the designed thermoforming mould and process.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The Korea-Japan Plastics Processing Joint Seminar
• /
• pp.63-66
• /
• 2003

Thermoforming of fiber reinforced thermoplastic (FRTP) braided tubes was studied as a new forming technique. FRTP braided tubes with four plies are fabricated by the pressure bonding method are used in thermoforming. Bulge forming, bending process, pipe fittings and FE analysis are carried out in this study. In bulge forming the composite tube can be expanded up to about two times initial diameter. The suggested bending process can be obtained bent products with various bending radii. In pipe fitting it is possible to fabricate T-shape fitting, cross fitting and two-branch fitting. These results exhibit developed forming processes become useful processes for textile composite tubes.

• 소성∙가공
• /
• 제22권3호
• /
• pp.171-177
• /
• 2013

Vacuum-assisted thermoforming is one of the critical steps for successful application of film insert molding (FIM) to make parts of complex shape. If the thickness distribution of the formed film is non-uniform, then cracking, deformation, warpage, and wrinkling can easily occur at the injection molding stage. In this study, the simulation of thermoforming was performed to predict the film thickness distribution, and the results were compared with experiments. Uniaxial tensile tests with a constant crosshead speed for various high temperatures were conducted to investigate the stress-strain behavior. An instance of yielding occurred at the film temperature of $90^{\circ}C$, and the film stiffness increased with increasing crosshead speed. Two types of viscoelastic models, G'Sell model, K-BKZ model, were used to describe the measured stress-strain relationship. The predicted film thickness distributions were in good agreement with the experimental results.

• Elastomers and Composites
• /
• 제57권3호
• /
• pp.114-120
• /
• 2022

The tensile properties of the extruded PC film were measured in the extrusion direction and perpendicular to the extrusion direction. The measured properties were the elastic modulus and Poisson's ratio at the glass transition temperature of PC. The measured orthotropic properties of the film were used for the computer simulation of vacuum forming. In this simulation, three mold shapes were tested: dome, trapezoid, and cubic, and the vacuum was applied between the mold surface and the heated film. The stress, strain, thickness, and stretch ratio distributions of the film in different mold shapes were observed and compared. The thermoforming simulation method used in this study and the obtained results, considering the determined orthotropic properties, can be applied to the thermoforming of various three-dimensional shapes.

• Design & Manufacturing
• /
• 제17권4호
• /
• pp.52-56
• /
• 2023

In this study, numerical simulation of the thermoforming process of PVC film material was performed using PAMForm. For this purpose, tensile tests were performed at various temperatures and the coefficients of the G'Sell model were obtained and used. As a result of the analysis, it was confirmed that the thickness decreased by up to 55% in the section where the film was in contact with the vertical direction and was greatly stretched. If the thickness is excessively thin, the part may become structurally weak, so in the thermoforming process, numerical simulation of the thickness in advance is expected to be helpful in successfully performing the process.

• 소성∙가공
• /
• 제23권1호
• /
• pp.10-15
• /
• 2014

Recently, micro-speakers have attracted much attention due to their increasing demand in mobile devices. Micro-speakers use polymer diaphragms, which are manufactured from thin polymer film by the thermoforming process. The diaphragm is generally designed to be a circular membrane with a cross section consisting of a double dome structure, and a number of corrugations are located in the outer region to produce better sound quality. In the current study, a finite element (FE) analysis is performed for thermoforming, and the resulting thickness reduction in the corrugation regions is estimated. The estimated thickness distribution is used in further structural and modal FE analyses, from which the effects of local thickness reduction on the stiffness and vibration characteristics are determined.

• Design & Manufacturing
• /
• 제14권1호
• /
• pp.15-21
• /
• 2020

Smart systems in different application areas such as automotive, medical and consumer electronics require a novel manufacturing method of electronic, optical and mechanical functions into products. Traditional methods including mechanical assembly, bonding of plastic and electronic circuit cause the problems in large size of products and complicated manufacturing processes. In this study, thermoforming and film insert molding were applied to fabricate a dome shaped plastic part embedded with electronic circuits. The deformation of patterns printed on PET film was predicted by thermoforming simulation using T-SIM, and the results were compared with those by experiment. In order to decrease spring-back after thermoforming, the Taguchi method of design of experiment was used. Through ANOVA analysis, it was found that mold temperature was the most dominant parameter for spring-back. By using flow analysis, gate design was performed to decrease injection pressure. During film insert molding, the wash-out of ink printed on film occurred for Polycarbonate. When the resin was changed to PMMA, the wash-out disappeared due to low melt temperature.