• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.1
• /
• pp.131-140
• /
• 2017

Uniform nanofibers of polyurethane with different content of Juniperus Chinensis extracts (JCE) were successfully prepared by the electrospinning method. We investigated physiochemical properties of prepared compound nanoweb according to various concentrations of Juniperus Chinensis extracts using a Fourier transform infrared (FT-IR) spectrometer, X-ray diffractometer (XRD), thermogravimeter (TGA), and differential scanning calorimeter (DSC). The antibacterial activity of the JCE loaded PU nanofiber was conducted using the disk diffusion test against Gram-positive and Gram-negative bacteria. JCE was induced in the infrared spectra in the absorption band of PU/JCE nanowebs at $3,300cm^{-1}$, $2,960cm^{-1}$, $1,400-1,600cm^{-1}$, and $1,050cm^{-1}$. Thermal stability decreased with increasing JCE content in the PU/JCE nanowebs. The DSC curve of the PU nanoweb shows an endotherm peak at $420^{\circ}C$; in addition, the peak also became smaller and broader with increasing JCE content. The diffraction intensities of PU observed at 2 theta of $20^{\circ}$ decreased with the increasing amount of JCE in the compound nanoweb. In addition, the crystal intensities of the compound nanowebs also decreased along with the JCE content. Structural analysis indicates that JCE and PU are miscible. Juniperus Chinensis incorporated PU nanofibers demonstrated excellent antibacterial properties against both Gram-positive and Gram-negative bacteria.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.9
• /
• pp.1482-1492
• /
• 2018

Fusarium oxysporum trypsin (FOT) is a fungal serine protease similar to mammal trypsin. The FOT could be successfully expressed in Pichiapastoris by engineering the natural propeptide APQEIPN. In this study, we constructed two recombinant enzymes with engineered amino acid sequences added to the N-terminus of FOT and expressed in P. pastoris. The N-terminal residues had various effects on the structural and functional properties of trypsin. The FOT, and the recombinants TE (with peptide YVEF) and TS (with peptide YV) displayed the same optimum temperature ($40^{\circ}C$) and pH (8.0). However, the combinants TE and TS showed significantly increased thermal stability at $40^{\circ}C$ and $50^{\circ}C$. Moreover, the combinants TE and TS also showed enhanced tolerance of alkaline pH conditions. Compared with those of wild-type FOT, the intramolecular hydrogen bonds and the cation ${\pi}$-interactions of the recombinants TE and TS were significantly increased. The recombinants TE and TS also had significantly increased catalytic efficiencies (referring to the specificity constant, $k_{cat}/K_m$), 1.75-fold and 1.23-fold than wild-type FOT. In silico modeling analysis uncovered that the introduction of the peptides YVEF and YV resulted in shorter distances between the substrate binding pocket (D174, G198, and G208) and catalytic triad (His42, Asp102, and Ser180), which would improve the electron transfer rate and catalytic efficiency. In addition, N-terminal residues modification described here may be a useful approach for improving the catalytic efficiencies and characteristics of other target enzymes.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.239-249
• /
• 2011

The behavior of the fiber reinforced concrete (FRC) base under environmental loads was analyzed numerically as a fundamental study to develop a high structural and functional performance composite pavement system in which the base was formed using FRC and the asphalt or cement concrete surface was placed on it. A two-dimensional finite element model of the FRC base was developed and the sensitivity study was performed with the variables including slab thickness of base, thermal expansion coefficient, elastic modulus, and tensile and compressive strengths. The crack spacing and crack width were selected as representatives of the base behavior. The effects of the selected variables on the crack spacing and crack width were analyzed and the sensitive variables were determined. The results of this study could be useful to determine the optimal material properties of the FRC base for combining well with the surface materials.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.501-504
• /
• 2008

A number of structures constructed during past decades have suffered from safety and serviceability problems due to deterioration and many engineers have been increasingly concerned about durability of concrete. Pipe-cooling method has been popularly used in the massive concrete to reduce temperature of the structure. Until now, usually this pipe-cooling method was applied only in foundation concrete structures, but it is newly tried to apply in the wall structure. We analyzed thermal stress of wall structure with the general structural analysis program that will be able to express the pipe-cooling element. We studied about the effect of reducing temperature and cracking control in the wall structure which can be applied in a pipe-cooling method with the analytical result which follows in an arrangement of the cooling pipe.

• Composites Research
• /
• v.29 no.6
• /
• pp.369-374
• /
• 2016

In this study, a structural optimal design of 10 MW composite blade was performed using bend-twist coupled(BTC) design concept. Bend-twist coupling of blade means the coupling behavior between the bending and torsional deflections due to the composite lamina with fiber angle biased from the blade longitudinal axis. This can potentially improve the overall performance of composite blade and reduce the dynamic loading. Parametric studies on layup angle, thickness and area of off-axis carbon UD were conducted to find the optimum coupling effect with weight reduction. Comparing the results of fatigue load analysis between conventional model and BTC applied model, the damage equivalent load(DEL) of blade root area were decreased about 3% in BTC model. To verify the BTC effect experimentally, a 1:29 scaled model was fabricated and the torsion at the tip under deflection behavior of blade stiffener model was measured by static load test.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.58-58
• /
• 2010

The purpose of this study is to evaluate the structural safety at the topside weldment of hull structure, which was welded after launching. For it, the variations of residual stress and distortion at the topside weldment with loading conditions such as hull girder hogging bending moment after launching and free initial loading state was evaluated by using FEA. And the maximum stress range at the weldment under design loads specified by classification society was evaluated by FEA. In this case, the residual stress and welding distortion at the topside weldment was assumed to be initial imperfection. In accordance with FEA results, regardless of initial loading condition, tensile residual stress was found. However, the residual stress and welding distortion at the topside weldment produced under hogging condition was less than those of topside weldment under free loading state. That is, the amount of residual stress at the topside weldment decreased with an increase in the amount of tension load caused by hogging condition. It was because the compressive thermal strain at the topside weldment produced during welding was reduced by tensile load. However, the maximum stress range at the topside weldment under maximum hull girder bending moment was almost similar regardless of initial loading condition. So, if the problem related to the soundness of weldment is not introduced by initial load, the effect of initial loading condition during welding on fatigue strength of topside weldment could be negligible.

• BMB Reports
• /
• v.44 no.12
• /
• pp.816-820
• /
• 2011

There is a broad range of different small heat shock proteins (sHSPs) that have diverse structural and functional characteristics. To better understand the functional role of mitochondrial sHSP, NtHSP24.6 was expressed in Escherichia coli with a hexahistidine tag and purified. The protein was analyzed by non-denaturing PAGE, chemical cross-linking and size exclusion chromatography and the $H_6NtHSP24.6$ protein was found to form a dimer in solution. The in vitro functional analysis of $H_6NtHSP24.6$ using firefly luciferase and citrate synthase demonstrated that this protein displays typical molecular chaperone activity. When cell lysates of E. coli were heated after the addition of $H_6NtHSP24.6$, a broad range of proteins from 10 to 160 kD in size remained in the soluble state. These results suggest that NtHSP24.6 forms a dimer and can function as a molecular chaperone to protect a diverse range of proteins from thermal aggregation.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.155.1-155.1
• /
• 2011

The Korea Astronomy and Space Science Institute (KASI) and the Department of Astronomy at the University of Texas at Austin (UT) are developing a near infrared wide-band high resolution spectrograph, IGRINS (Immersion Grating Infrared Spectrograph). The white-pupil design of the instrument optics uses 7 cryogenic mirrors including 3 aspherical off-axis collimators and 4 flat fold mirrors. Two of the 3 collimators are H- and K-band pupil transfer mirrors and they are designed as compensators for the system alignment in each channel. Therefore, their mount design will be one of the most sensitive parts in the IGRINS optomechanical system. The other flat fold mirrors are designed within the limited area. Each of those includes the features of 3 axial hard points and 2 radial hard points with one spring plunger in order for the proper deflection of the mirror. The design work will include the computer-aided 3D modeling and finite element analysis (FEA) to optimize the structural stability and the thermal behavior of the mount models. The mount body will also include a tip-tilt and translation adjustment mechanism to be used as the alignment compensators.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.218-224
• /
• 2014

In order to explore new coordination frameworks with novel designed 3-nitrophthalic acid and the same N-donor ancillary ligand, a series of novel coordination complexes, namely, $[Cd_2(3-NPA)_2(TBZ)_2(H_2O)_2]{\cdot}2H_2O$(1), $[Zn_2(3-NPA)_2(TBZ)_2]$(2), $[Zn_2O(3-NPA)(TBZ)(H_2O)]_n$(3), $[Co(3-NPA)(TBZ)(H_2O)]_n$(4) (3-$NPAH_2$ = 3-nitrophthalic acid), have been hydrothermally synthesized through the reaction of 3-nitrophthalic acid with divalent transition-metal salts in the presence of N-donor ancillary coligand (TBZ = thiabendazole). As a result of various coordination modes of the versatile 3-$NPAH_2$ and the coligand TBZ, these complexes exhibit structural diversity. X-ray structure analysis reveals that 1 and 2 are 0D molecular rings, while 3 and 4 are one-dimensional (1D) infinite chain polymers. And the weak O-H${\cdots}$O hydrogen bonds and C-H${\cdots}$O nonclassical hydrogen bonds as well as ${\pi}-{\pi}$ stacking also play important roles in affecting the final structure where complexes 1, 3 and 4 have 3D supramolecular architectures, while complex 2 has a 2D supramolecular network. Also, IR spectra, fluorescence properties and thermal decomposition process of complexes 1-4 were investigated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.630-630
• /
• 2013

Recently, atomically smooth hexagonal boron nitride(h-BN) known as a white graphene has drawn great attention since the discovery of graphene. h-BN is a III-V compound and has a honeycomb structure very similar to graphene with smaller lattice mismatch. Because of strong covalent sp2bonds like graphene, h-BN provides a high thermal conductivity and mechanical strength as well as chemical stability of h-BN superior to graphene. While graphene has a high electrical conductivity, h-BN has a highly dielectric property as an insulator with optical band gap up to 6eV. Similar to the graphene, h-BN can be applied to a variety of field, such as gate dielectric layers/substrate, ultraviolet emitter, transparent membrane, and protective coatings. However, up until recently, obtaining and controlling good quality monolayer h-BN layers have been too difficult and challenging. In this work, we investigate the controlled synthesis of h-BN layers according to the growth condition, time, temperature, and gas partial pressure. h-BN is obtained by using chemical vapor deposition on Cu foil with ammonia borane (BH3NH3) as a source for h-BN. Scanning Transmission Electron Microscopy (STEM, JEOL-JEM-ARM200F) is used for imaging and structural analysis of h-BN layer. Sample's surface morphology is characterized by Field emission scanning electron microscopy (SEM, JEOL JSM-7100F). h-BN is analyzed by Raman spectroscopy (HORIBA, ARAMIS) and its topographic variations by Atomic force microscopy (AFM, Park Systems XE-100).