• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1391-1396
• /
• 2009

The direct drive motor used in a precision motion rotate at about 1/10 speed and high torque comparing with general rotary motor. Excessive heating of the coils cause an exacerbating the heat problems and reducing the performance of motor. Because the rotation speed of the rotor and surrounding air is low, the motor can not be inefficiently cooled, the thermal analysis in the motor is very important. As the variations of rotation speed and torque, the temperature of several parts is measured and the features of the heat transfer is analyzed and improved.

• KSTLE International Journal
• /
• 제7권1호
• /
• pp.22-26
• /
• 2006

A simple finite element analysis is performed to simulate the thermal characteristics of a micro sensor package with thin film heater embedded in the glass wall of a micro-channel. In this paper, Electric characteristics of ITO sputtered heater were presented in this study, which can be used as a map of heater design in the range of available system temperature. The effects of thermo-physical properties of materials, geometrical structure and boundary condition on the thermal performance are also investigated. Finally, the design of micro-flow induced thermal sensor that is capable of measuring fluid flow with a lower flow detection limit of approximately 24pL/s is presented.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.207-208
• /
• 2007

Recently, high performance microelectronic devices are designed in multi-layer structure in order to make dense wiring of metal conductors in compact size. Imprint lithography have received significant attention due to an alternative technology for photolithography on such devices. In this work, we synthesized dielectric composite materials based on epoxy resin, and investigated their thermal stabilities and dynamic mechanical properties for thermal imprint lithography. In order to enhance the mechanical properties and toughness of dielectric material, various modified polyetherimide(PEI) was applied in the resin system. Curing behaviours, thermal stabilities, and dynamic mechanical properties of the dielectric materials cured with various conditions were studied using dynamic differential scanning calorimetry (DSC), thermo gravimetric analysis (TGA), and Universal Test Method (INSTRON).

• 대한기계학회논문집A
• /
• 제22권1호
• /
• pp.33-43
• /
• 1998

High cutting speeds and feeds are essential requirements of a machine tool structure to accomplish its basic function which is to produce a workpiece of the required geometric form with an acceptable surface finish at as high a rate of production as is economically possible. Since the bearings in high speed spindle units are the main heat source of the total cutting system, in this work, the thermal characteristics of the spindle bearing system with a tilting axis were investigated using finite element methods to improve the performance of the spindle bearing system. Based on the theoretical results, a specially designed prototype spindle bearing system has been manufactured. Using the manufactured spindle bearing system, the thermal characteristics were measured. From the comparison of the experimental results with the theoretical ones, it was found that the finite element method predicted well the thermal characteristics of the spindle bearing system.

• 한국기계가공학회지
• /
• 제10권3호
• /
• pp.28-32
• /
• 2011

The safety of transporting equipment in a cryogenic condition is one of important problems under the circumstances that the application weight of natural gas is gradually increasing. As a larger disaster may be generated by leakage of oil or gas from valves in case of fire occurrence of a ship, the present research applied a numerical analysis method on thermal stress distribution and deformation, etc. to the design of ball valves satisfying fire safety test's specification(API607) to prevent this. In addition, the present research progressed fire safety tests and compared the test result with numerical analysis results. The Max stress by parts was confirmed through thermal analysis of major parts to evaluate safety. The fire safety test was progressed according to the regulation of API607.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.815-820
• /
• 2009

Binary nanoemulsions which are defined as the, oil-droplet suspensions in binary solution ($H_2O$/LiBr), are developed to enhance the heat and mass transfer performance of absorption refrigeration systems. In this study, a novel two-step method is proposed to prepare the stable oil-in-binary solution (O/S) emulsion. Polymer is used as a steric stabilizer to stabilize the oil-droplets in a strong electrolyte ($H_2O$/LiBr). It is found that the thermal conductivity of the binary nanoemulsion is inversely proportional to the emulsion size while the concentrations of oil and $H_2O$/LiBr are less dominant for the thermal conductivity of binary nanoemulsions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
• /
• pp.138-141
• /
• 2004

In this paper, we Investigated effects on impurities and water of semiconductive shield through a thermal, mechanical, and absorption experiment to estimate performance of insulating materials in power cable. Specimens had been prepared 22[kV], 154[kV] XLPE power cables and then were made of sheet form with XLPE and semiconductive shield with dimension of 0.4[mm] ~1.2[mm] of thickness from power cable. Heat capacity $({\Delta}H)$ and glass trasition temperature (Tg) of XLPE sheet were measured by DSC (Differential Scanning Calorimetry). We could know that thermal stabilities of 154[kV] are more excellent than 22[kV] from this experimental result. The strain of mechanical properties in 22[kV] and 154[kV] XLPE was 486[%], 507[%] and stress was 1.74$[kgf/mm^2]$, 1.80$[kgf/mm^2]$. The absorption contents of existing semiconductive shield were measured 710[ppm] to 1,090[ppm], and semiconductive shield of 22[kV] cable was measured 14,750[ppm] to 24,780[ppm]. We thermal and mechanical properties of 154[kV] could know more excellent than 22[kV] from this experimental result.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제2권1호
• /
• pp.65-72
• /
• 2014

본 연구에서는 지역난방 공사에서 사용하고 있는 성층 축열조의 불가용 에너지를 줄이기 위해 단열층을 설계하였다. 단열층은 추가적인 장치 없이 고온수와 저온수의 밀도차이로 생기는 부력으로 운용된다. 축열조의 내부 온도분포를 모사할 수 있는 해석모델을 Matlab Simulink 를 이용하여 제작하고 해석 결과를 이용하여 단열층의 소재와 두께를 결정하였다. 또한 축열조의 축소실험을 통하여 단열층의 운용 가능성을 확인하였다. 실험 결과, 단열층이 축열 방열과정에서 고온수와 저온수의 혼합과 열전도로 인한 온도 경계층형성을 효과적으로 억제할 수 있다는 것을 확인하였다. 단열층을 설치한 축소실험에서는 단열층이 없는 축열조보다 약 1540 J 의 추가 가용에너지가 보존되었고 이를 실제 축열조에 적용할 경우 약 6%의 축열효율이 증가될 것으로 예상된다.

• 한국전산구조공학회논문집
• /
• 제32권2호
• /
• pp.109-116
• /
• 2019

본 논문에서는 인체의 열상대역 저피탐을 위한 선행연구로써 인체에서 방사되는 적외선 신호의 특성을 소개한다. 인체에서 방사되는 적외선 신호는 인체 표면의 방사율과 표면온도에 의하여 결정된다. 따라서 적외선 신호해석을 위하여 표면온도를 정확히 도출할 필요가 있고, 이를 위하여 인체의 열적 편안함을 도출하는데 주로 사용 되어온 체온 조절 작용 및 다층 구조 피부 모델을 적용하여 인체의 표면온도 도출에 사용하였다. 기법의 검증을 위하여 비정상 해석 결과와 실험결과의 비교검증을 수행하였으며, 이로부터 체온 조절 작용이 인체의 표면온도 결정에 미치는 영향을 파악하였다. 비정상 해석을 통해 도출된 표면온도와 피부 및 의복의 방사율을 이용하여 적외선 신호를 도출하였으며, 가상의 배경조건에 따라 나타나는 인체의 적외선 신호 특성을 파악하였다. 의복을 착용함으로써 인체는 저방사 배경과의 적외선 신호차이가 작아지는 반면 고방사 조건에서는 역대비로 인해 오히려 피탐지성이 증가하게 된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.280-285
• /
• 2001

This paper presents a modelling of thermal discharge performance for a static ice-on-coil ice-storage tank. Through the present study, discharging characteristics were examined with the existing results of theoretical and numerical heat transfer analyses. Also, an experiment was conducted to obtain a real set of discharge performance. The thermal effectiveness, the ratio of the actual heat transfer rate to the maximum possible heat transfer rate, decreased when the stored energy decreased during discharging period. And the effectiveness increased as the coolant flow rate through the storage increased, of which increasing rate decreased abruptly near the maximum and the minimum stored energy. An empirical correlation was obtained from the experimental and the numerical analysis data.