• Korean Journal of Remote Sensing
• /
• v.29 no.5
• /
• pp.443-459
• /
• 2013

Located on Java subduction zone, Merapi volcano is an active stratovolcano with a volcanic activity cycle of 1-5 years. Merapi's eruptions were relatively small with VEI 1-3. However, the most recent eruption occurred in 2010 was quite violent with VEI 4 and 386 people were killed. In this study, we have attempted to study the characteristics of Merapi's eruptions during 18 years using optical Landsat images. We have collected a total of 55 Landsat images acquired from July 6, 1994 to September 1, 2012 to identify pyroclastic flows and their temporal changes from false color images. To extract areal extents of pyroclastic flows, we have performed supervised classification after atmospheric correction by using COST model. As a result, the extracted dimensions of pyroclastic flows are nearly identical to the CVP monthly reports. We have converted the thermal band of Landsat TM and ETM+ to the surface temperature using NASA empirical formula and calculated time-series of the mean surface temperature in the area of peak temperature surrounding the crater. The mean surface temperature around the crater repeatedly showed the tendency to rapidly rise before eruptions and cool down after eruptions. Although Landsat satellite images had some limitations due to weather conditions, these images were useful tool to observe the precursor changes in surface temperature before eruptions and map the pyroclastic flow deposits after eruptions at Merapi volcano.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2402-2411
• /
• 2018

Fluoronitriles-$CO_2$ gas mixtures are promising alternatives to $SF_6$ in environmentally-friendly gas-insulated transmission lines (GILs). Insulating gas heat transfer characteristics are of major significance for the current-carrying capacity design and operational state monitoring of GILs. In this paper, a three-dimensional calculation model was established for a GIL using the thermal-fluid coupled finite element method. The calculated results showed close agreement with experimentally measured data. The temperature distribution of a GIL filled with the Fluoronitriles-$CO_2$ mixture was obtained and compared with those of GILs filled with $CO_2$ and $SF_6$. Furthermore, the effects of the mixture ratio of the component gases and the gas pressure on the temperature rise and current-carrying capacity of the GIL were analyzed. Results indicated that the heat transfer performance of the Fluoronitriles-$CO_2$ gas mixture was better than that of $CO_2$ but worse than that of $SF_6$. When compared with $SF_6$, use of the Fluoronitriles-$CO_2$ gas mixture caused a reduction in the GIL's current-carrying capacity. In addition, increasing the Fluoronitriles gas component ratio or increasing the pressure of the insulating gas mixture could improve the heat dissipation and current-carrying capacity of the GIL. These research results can be used to design environmentally-friendly GILs containing Fluoronitriles-$CO_2$ gas mixtures.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.11
• /
• pp.991-998
• /
• 2010

The effect of increasing the elevation of an IHX (intermediate heat exchanger) on the transient performance of the KALIMER-600 reactor pool during the early phase of a loss of normal heat sink accident was investigated. Three reactors equipped with IHXs that were elevated to different heights were designed, and the thermal-hydraulic analyses were carried out for the steady and transient state by using the COMMIX-1AR/P code. In order to analyze the effects of the elevation of an IHX between reactors, various thermal-hydraulic properties such as mass flow rate, core peak temperature, RmfQ (ratio of mass flow over Q) and initiation time of decay heat removal via DHX (decay heat exchanger) were evaluated. It was found that with an increase in the IHX elevation, the circulation flow rate increases and a steep rise in the core peak temperature under the same coastdown flow condition is prevented without a delay in the initiation of the second stage of cooling. The available coastdown flow range in the reactor could be increased by increasing the elevation of the IHX.

• Journal of Sericultural and Entomological Science
• /
• v.38 no.2
• /
• pp.160-167
• /
• 1996

The middle silk gland, that is a liquid silk thread gland consisting of silk protein, was taken out and a silk monofilament was made by drawing rapidly to approximately 3 times. In order to deteriorate the inter molecular hydrogen bonding force and to stretch in, the drawn silk filament was swoolen in boiling water. The results obtained are as follows ; The silk gland sample that just dried silk gland was occupied in crystalline region of silk-I type and random amorphous region. According to the examination of X-ray diffraction and thermal analysis, silk-II type crystal begins to appear partially in monofilament sample and spread to almost complet silk-II type crystal in 65.2% drawn sample. And, orientation of silk fibroin mlecule increased suddenly in early stage with a rise of drawing ratiofrom birefringence and density, and it was found that orientation of fibroin molecule was completed. As drawing ratio increases relation with time of hydrolysis, birefringence appeared almost fixed a tendency. Crystallization collapse by hydrolysis was not found in X-ray diffraction and thermal analysis. But, amorphous region began to flow by treated hydrolysis, that orientation of crystallization part was disturbed was supposed.

• Nuclear Engineering and Technology
• /
• v.19 no.1
• /
• pp.22-33
• /
• 1987

The confirmed integrity of nuclear fuel cladding materials is an important object during steady state and transient operations at nuclear power plant. In this context, the clad material yielding behavior is especially important because of pellet-clad gap expansion. During the steep power excursion, the in-pile irradiation behavior differences between uranium-dioxide fuel pellet and zircaloy clad induce the contact pressure between them. If this pressure reaches the zircaloy clad yield pressure, the zircaloy clad will be plastically deformed. After the reactor power resumed to normal state, this plastic permanent expansion of clad tube give rise to the pellet-clad gap expansion. In this paper, the simple mandrel expansion test method which utilizes thermal expansion difference between copper mandrel and zircaloy tube was adopted to simulate this phenomenon. That is, copper mandrel which has approximately three times of thermal expansion coefficient of zircaloy-4 (PWR fuel cladding material) were used in this experiment at the temperature range from 400C to 700C. The measured plastic expansion of zircaloy outer radius and derived mathematical relations give the yield pressure, yield stress of zircaloy-4 clad at the various clad wall temperatures, the activation energy of zircaloy tube yielding, and pellet-clad gap expansion. The obtained results are in good agreement with previous experimental results. The mathematical analysis and simple test method prove to be a reliable and simple technique to assess the yielding behavior and gap expansion measurement between zircaloy-4 tube and uranium-dioxide fuel pellet under biaxial stress conditions.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.04a
• /
• pp.255-263
• /
• 1998

Dust-free garment prevents contamination which otherwise is caused by skin and clothes to protect from dust or dirt. Therefore, it requires high performance and should function as a working clothes. Clothes are a medium between human and thermal environmental system, and it is required to study human enviroment to ensure comfortableness of clothes and to satisfactorily go along with enviroment .This study investigates the physical and physiological features of dust-free garment used in the clean room at a semiconductor factory in oredr to scientifically clarify what the dust-free garmint is as well as to contribute to the design and development of high performance material and clothes. Three kinds of dust-free fabrics (DFG-I, DFG-II, DFG-III) which are being developed by a local company are used to manufacture dust-free garment. These dust-free garments are dressed and tested in such an enviroment as similar to semiconmemts with temperature at 23${\pm}$1$^{\circ}C$ and humidity at 50${\pm}$5%RH in order to investigate the thermo physiological and psychological features of human body. The results of this study are as follows. The results of this study are as follows. 1.The mean skin temperature was significantly different among the clothes, subjects and experimental time. Temperature tends to rise from the time of exercising load. Continuous motion coupled sealed clothes prevents heat transmittance, and temperature rises in the order of DFG-l, DFG-ll and DFG-lll as time course. 2.As for the skin temperature by local timperature is minimun on the head and torso and increares remarkably at the terminal part of human body. 3. As for the body mass loss was significantly higher in DFG-lll than DFG-l and DFG-ll. 4. Though there is no significant difference in the temperature within clothes among the kind of clothes temperature is 1$^{\circ}C$ higher in the back. Temperature within all the dust-free garments 29.7$^{\circ}C$ in the back and 31.3$^{\circ}C$ in the chest which belong to the comfort zone(31-33$^{\circ}C$). The relative humidity is 39.7%RH in the chest and 33.8%RH in the back which is slightly below the comfort zone(40-60%RH) 5. The thermal sensation belong to the comfort zone regardless of the kinds of clothes. The subjects feels a slight fatigue as times goes. As for the subjective sense of subjects the mean skin temperature as well as temperature and humidity within clothes show similar tendency. This means that they relate with each other.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.12 no.1
• /
• pp.11-16
• /
• 2001

Background and Objectives : A burn injury to the glottis differs from a burn injury to the trachea, bronchi, and lung parenchyma, in that thermal injury does not occur to any significant degree below the level of the larynx, due to the effective cooling of air by the upper airway and to reflex closure of the vocal cords from a blast of hot air. Therefore, the laryngeal inhalation injury give rise to airway problem and voice change. The objectives of this study is to assess management of laryngeal inhalation injury and voice change after management. Materials and Methods : Voice choses and laryngeal injuries of eight laryngeal inhalation patients were analyzed through questionnaire, voice dynamic laboratory, and laryngeal stroboscopy. Operative management was performed to five patients for airway patiency and vocal cord movement on laryngeal pathology ind voice therapy was performed to all patients. One-year after, voice changes and laryngeal injuries were reanalyzed with same methods. Results : Vocal breathiness, decreased voice intensity, reduced voice range, and easy fatigability were major complaints of laryngeal inhalation patients. Glottic stenosis were developed to five of eight patients, and vocal cord atrophy, bowing were developed to others. Vocal cord mucosal waves were significantly decreased in all patients. Jitter(%), Shimmer(dB) were increased and Maximal phonation time(MPT) was decreased. One-year after, subjective voice changes and objective voice parameters were improved. And vocal cord mucosal waves were recovered in all patients. Conclusions : Subjective voice quality and objective voice parameters were improved after operative management for laryngeal pathology and voice therapy. And we observed recovery of vocal fold mucosal waves by laryngeal stroboscopy. We think that early preventable tracheotomy is necessary to reduce the laryngeal contact injury in laryngeal inhalation patients.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.1
• /
• pp.15-22
• /
• 2014

Multiple devices have been installed to reduce exhaust emissions and to increase thermal efficiency. Those devices reduce the exhaust pipe opening area and increase the exhaust gas pressure. The pressure increase disturbs a gas flow and has a bad effect on the engine performance. However there is some study that NOx can be reduced with exhaust gas pressure increase. In this study an engine performance is tested with various opening ratios. The result shows that the fuel consumption rate is reduced in case of little amount of the pressure increase, and NOx is reduced with the pressure increase, while the concentration of the toxic exhaust gases are increased in the case of high back-pressure.

• Journal of the Korean Society of Costume
• /
• v.63 no.8
• /
• pp.143-155
• /
• 2013

The outdoor apparel market has been growing very fast recently, and consumers are spending more time doing outdoor activities for their leisure. As the outdoor apparel market is growing, it has started to combine functionality with style to provide more diverse designs and colors for all ages. The increase of interest in heathy life-styles, outdoor activities, and leisure has lead to a rise in demand for outdoor apparel. Now outdoor apparel have become a part of people's daily casual wear in addition to being worn for outdoor activities. This study is focused on a outdoor jacket design which is used as down-alternative material and the purpose of this study is to design outdoor jackets using a down-alternative fabrics that improve the thermal and lightweight effects for clothing comfort, and increase the satisfaction of wearing down-alterative outdoor jacket. The research of this paper was done by using a questionnaire survey. The survey was used to examine the male customers' outdoor activities, purchase behaviors, place, expense and design preferences. Then, down-like fabric was used to make the prototype down jacket and its design, function, and satisfaction with wearing compared with other brands down jacket products were analyzed. Although duck down fabrics are representative of outdoor jackets, they have many problems that need to be solved such as feathers falling out or its vulnerability to moisture. They have competitive prices compared to down jackets so down-alternative jackets are able to gain more proportion of its market share.

• Korean Journal of Materials Research
• /
• v.30 no.6
• /
• pp.301-307
• /
• 2020

In this study, factors considered to be causes of promotion of densification of sintered pellets identified during phase change are reviewed. As a result, conclusions shown below are obtained for each factor. In order for MA powder to soften, a temperature of 1,000 K or higher is required. In order to confirm the temporary increase in density throughout the sintered pellet, the temperature rise due to heat during phase change was found not to have a significant effect. While examining the thermal expansion using the compressed powder, which stopped densification at a temperature below the MA powder itself, and the phase change temperature, no shrinkage phenomenon contributing to the promotion of densification is observed. The two types of powder made of Ti-silicide through heat treatment are densified only in the high temperature region of 1,000 K or more; it can be estimated that this is the effect of fine grain superplasticity. In the densification of the amorphous powder, the dependence of sintering pressure and the rate of temperature increase are shown. It is thought that the specific densification behavior identified during the phase change of the Ti-37.5 mol.%Si composition MA powder reviewed in this study is the result of the acceleration of the powder deformation by the phase change from non-equilibrium phase to equilibrium phase.