• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권1호
• /
• pp.23-28
• /
• 1999

Electrical breakdown characteristics of liquid nitrogen($LN_2$) used as both coolant and insulator for high $T_c$ superconductor system are very important. This paper presents dynamic breakdown characteristics fo $LN_2$ by quench phenomena of thermal bubble under high electric field. Experimental results revealed dynamic breakdown voltage fell down drastically compared with the static breakdown voltage without the quench. Because of increasing heat power, bubble size becomes big and breakdown voltage decreases. The breakdown voltage mechanism of $LN_2$ depends on thermal bubble effect. In the Electrode arrangement, electrical breakdown voltage of horizontal arrangement appears lower than that of vertical arrangement. Also, we observed the behavior of thermal bubbles in $LN_2$ which were generated after quench using camera.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.308-310
• /
• 2000

일반적으로 Bi계 고온초전도선재(HTS Tape)는 저온초전도선재(LTS Tape)에 비해서 비열이 수백 배 이상 크므로 열적으로 상당히 안정한 성격을 가진다. 그러므로 이러한 HTS Tape를 TQ(Thermal Quench)시켜주는 일은 매우 어렵게 되는데, 일반적으로 HTS Tape를 이용한 초전도응용 분야에서 TQ를 이용한 스위칭 동작이 매우 중요하므로, 응응에 앞서 이에 관한 연구가 반드시 이루어져야 할 것이다. 본 연구에서는 Bi-2223 Short Sample의 TQ 특성을 실험하여 온도특성과 전압특성 등을 비교하였으며, 또한 이론적으로 HTS Tape를 TQ시켜주기 위한 열량과 실제 실험에서 사용된 열량의 값을 비교하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권3호
• /
• pp.6-9
• /
• 2009

The thermal characteristics of quench propagation is a crucial problem for the stability of the superconductor. The objective of this study is to simulate the quench propagation with the variation of disturbance energy in Bi-2223/Ag HTS pancake coil. In this analysis, the temperature-time trace of a point away from heater was calculated under conditions of different quench energy. The critical disturbance energy between quench propagation and quench recovering was calculated, In addition, the minimum quench energy with different transport currents was obtained through the present simulation. These results are significant to the application of HTS.

• Progress in Superconductivity
• /
• 제10권2호
• /
• pp.149-154
• /
• 2009

We measured and analyzed the quench development in coated conductor(CC) tapes. The CC was grown on hastelloy substrates and has an Ag protection layer. The tapes were subjected to simulated AC fault currents for quench development measurement. They were immersed in liquid nitrogen during the experiment. The quench resistance increased rapidly first, and the increase slowed down afterwards. It increased linearly with applied voltage at lower voltages, and depended less strongly on applied voltage at higher voltages. The resistance was compared with that of Au/YBCO films grown on sapphire substrates, and found to increase more monotonously than the latter. Data were analyzed quantitatively with the concept of heat transfer within the tape and the surrounding liquid nitrogen. A heat balance equation was derived and solved, taking into consideration temperature dependence of thermal parameters of the tapes. Solutions, together with values of thermal parameters taken from the literature, explained the data well. Cooling by liquid nitrogen affected the quench development considerably at lower applied voltages. Dependence on applied voltages could be also understood quantitatively.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권9호
• /
• pp.895-900
• /
• 1997

A Quench in cable-in-conduit (CIC) conductors is often initiated by a disturbance such as strand motion that generates a highly localized normal zone in a strand or a few strands of the CIC conductors. The localized normal zone causes current and heat transfer between a disturbed strand and neighboring strands. Electrical and thermal contact characteristics between strands thus have an effect on the transient stability of the CIC conductors. In this paper the effect of contact characteristics between strands on the CIC conductor stability is presented based on the measured heat transfer characteristics of supercritical helium (SHe) for the local heating. The quench and recovery processes of the strands for the abrupt and highly localized disturbance are analyzed at the boundary between quench and recovery.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2005년도 High Temperature Superconductivity Vol.XV
• /
• pp.20-20
• /
• 2005

• 한국전기전자재료학회논문지
• /
• 제22권7호
• /
• pp.602-605
• /
• 2009

The heat generation in the high-$T_c$ superconducting (HTS) wire is related with the cost efficiency and safe factor of HTS devices. This paper deals with the thermal quench at the conduction-cooled joint between HTS wire and copper terminals. The 3-D numerical simulation of thermal distributions in part of the copper terminals was implemented and the premature quench at copper block was observed through the test. The results will be helpful to design the conduction-cooled HTS magnets.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.189-1-190-1
• /
• 2008

A high temperature superconducting(HTS) power cable is available for high capacity current in normal condition. But resistance was appeared to operate unbalance load by thermal current characteristic. This characteristic of HTS power cable used to design for unstated condition. And than, It used to understand and analyze characteristic of power cable thermal and critical current. This study appeared that quench resistance reason from shield and former current rise to superconductor(SC) current. The resistance of SC occurred that the cable temperature rise to fault current after decreased critical current. The quench resistance of SC increased in temperature or decreased in critical current. So the quench resistance of SC correlated with resistance of both shield and former current. It need to sufficiently influenced the parameters of HTS cable design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.244-246
• /
• 1997

This paper is to analyze the Premature Quench characteristics of a rotating magnet type superconducting fluxpump and consider the method of detecting and protecting this premature quench. Practically, there is contact resistance between the fluxpump and the load, namely the S.C. magnet. The thermal increase due to the contact resistance cause the premature quench before the charging current amounts to the critical current of S.C magnet. Therefore, this paper is devoted to solving the heat equation on contact region using cylindrical coordinates and to calculating the rate of thermal increase during the current is pumped up. Doing so, the predictive value of the maximum pumping current is obtained. It has been verified that the results of simulation are coincident with those of experiment. It must be considered essentially to minimize the contact resistance in designing the S.C fluxpump system in order to protect the premature quench and improve the maximum pumping current.

• 에너지공학
• /
• 제14권1호
• /
• pp.62-71
• /
• 2005

B&C(Blowdown and Condensation)장치를 이용하여 APR1400 실규모 I-Sparger의 증기제트 응축에 의한 수조내 열혼합 현상에 대한 실험이 수행되었다. 한정된 가압기 용량으로 인하여 과도상태 실험이 수행되었으며, 실험을 통해 수조내에 배치된 열전대를 사용하여 열혼합 자료를 얻었다. 측정된 열혼합 자료를 바탕으로 지역별 온도 변화의 경향과 수조 수직-단면상의 온도 윤곽도를 작성하였으며 이를 바탕으로 I-Sparger의 열혼합 특성을 파악하였다. 실험결과에서 I-Sparger에 의한 열혼합 특성은 I-Sparger 설계특성이 나타나는 열혼합 경향을 보이고 있음을 확인하였다.