• Journal of the Korean Society of Safety
• /
• v.9 no.1
• /
• pp.28-30
• /
• 1994

Ultrasonic for MoSi$_2$/Y. C. Kim, C. K. Namkoong/MoSi$_2$in the silicides has excellence in the oxidation and corrosion resistence. When the solid state bonding sintered-MoSi$_2$/metal or the thermal sprayed coating by powder-MoSi$_2$on the metal are carried out, the defects may be occured at the bonded surface. So, the method for evaluating the existence of the defects by non-destructive inspection is strongly desired. Here, the characteristics of ultrasonic for sintered-MoSi$_2$are elucidated and the possibility of the detection of defects using by ultrasonic is investigated.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.6
• /
• pp.621-630
• /
• 1998

The concentrations of organic carbon (OC) and elemental carbon (EC) in fine aerosols were determined from the samples collected at the two background sites of Kosan in Cheju Island and Kangwha. Samplings were carried out during the spring and winter of 1996 and the fall and winter of 1997. PM25 particles were collected on the prefired quartz filters for 24 hours and analyzed by the selective thermal oxidation method. The concentrations of OC at the sites were higher than those commonly observed from clean areas around the world, but those of EC at both sites were lower than, or comparable to, other clean areas in the world. Both the OC and EC levels at Kangwha were higher than those at Kosan. According to backward trajectory analysis, most air pollutants collected at the two sites were from China. It was found that the OC and EC concentrations in air masses from southern China were higher than those from northern China.

• Journal of Powder Materials
• /
• v.8 no.2
• /
• pp.104-109
• /
• 2001

The semiconducting ${\beta}-FeSi_2$ compound has been recognized as a thermoelectric material with excel-lent oxidation resistance and stable characteristics at elevated temperature. In the present work, we applied mechanical alloying(MA) technique to produce ${\beta}-FeSi_2$ compound using a mixture of elemental iron and silicon powders. The mechanical alloying was carried out using a Fritsch P-5 planetary mill under Ar gas atmosphere. The MA powders were characterized by the X-ray diffraction with Cu-K $\alpha$ radiation, thermal analysis and scanning electron microscopy. The single ${\beta}-FeSi_2$ phase has been obtained by mechanical alloying of $Fe_{33}Si_{67}$ mixture powders for 120 hrs or for 70 hrs coupled with the subsequent heat treatment up to $700^{\circ}C$. The grain size of ${\beta}-FeSi_2$ powders analyzed by Hall plot method was 44nm.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.1
• /
• pp.159-164
• /
• 2008

Two kinds of CNT/TiO2 composite photocatalysts were synthesized with multi-walled carbon nanotubes (MWCNTs) and titanium(IV) n-butoxide (TNB) by a MCPBA oxidation method. Since MWCNTs had charge transfer and semiconducting, the CNT/TiO2 composite shows a good photo-degradation activity. The XRD patterns reveal that only anatase phase can be identified for MCT composite, but the HMCT composite synthesized with HCl treatment was observed the mixed phase of anatase and rutile. The EDX spectra were shown the presence as major elements of Ti with strong peaks. From the SEM results, the sample MCT and HMCT synthesized by the thermal decomposition with TNB show a homogenous sample with only individual MWCNTs covered with TiO2 without any jam-like aggregates between CNTs and TiO2. From the photocatalytic results, we could be suggested that the excellent activity of the CNT/TiO2 composites for organic dye and UV irradiation time could be attributed to combination effects between TiO2 and MWCNTs with plausible photodegradation mechanism.

• Ceramist
• /
• v.22 no.3
• /
• pp.256-268
• /
• 2019

Ceramic nano pigments have attracted much interest owing to recent demand for nontoxic, heavy metal-free pigments. In general, ceramic pigments must possess thermal stability at high temperature, however nanosized powder easily undergoes aggregation at high temperature, and its color turns. serveral groups have focused on to minimize agglomeration and oxidation, a core-shell structure with a silica coating is suggested. In this review, we introduce the reported the trend of nano-ceramic powders and we summarized method improve color and physical properties throuth morphology control and ceramic coating technology.

• Journal of the Korean Ceramic Society
• /
• v.32 no.1
• /
• pp.11-16
• /
• 1995

High reaction heat evolved from the oxidation of Al was used to synthesize SiC, which might be difficult to be formed by SHS. Al2O3-SiC composite powder was easily manufactured using KNO3 as an ignition and reaction catalyst. Unreacted Si and C were observed after reaction dependent upon the composition of starting powders, reaction atmosphere and relative densities of compacted bodies. The unreacted carbon could be removed by calcining at $600^{\circ}C$ and the remaining Si could be removed by dissolving in NaOH solution. The final powder particles were smaller than 1${\mu}{\textrm}{m}$ in size.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.3
• /
• pp.341-350
• /
• 2012

In this paper we observe the protective coatings carbon for steel, aluminium and titanium alloys were obtained by plasma electrolytic oxidation (PEO) under unipolar and bipolar conditions. The anticorrosion properties and the thermal stability of the surface layers were studied by electrochemical impedance spectroscopy and potentiodynamic polarization. It was found that the application of the bipolar PEO mode enables one to synthesize the surface layers that possess enhanced anticorrosion and mechanical properties. results of research of antiscale PEO - coatings for marine power equipment are presented. The combined method of prevention of corrosion and scale formation was tested at the industrial plants of Russian Shipyard "Zvezda".

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.260-263
• /
• 1996

The thermally stimulated currents(TSC) are measured to know the behaviour of charging particles of epoxy composites at the temperature range of -160∼200[$^{\circ}C$] and to prove the variation according to curing time in this study. It is confirmed that the peak amplitude is inversely proportional to the curing time, and TSC are reduced is and T$\sub$m/ is moved to high temperature side according to the curing time because carboxyl radical is formed by thermal oxidation and motility becomes lack.

• Electrical & Electronic Materials
• /
• v.5 no.4
• /
• pp.385-392
• /
• 1992

급속열산화방법으로 400-650.deg.C의 온도범위에서 10-600초 동안 n형 InP기판위에 InP자연산화막을 형성하고 산화막의 성장율, 성장기구와 화학적 구성성분 및 전기적 성질등을 조사하였다. InP자연산화막의 두께는 산화시간이 제곱근에 비례하였고 산화온도에 대하여 지수함수적으로 증가하였다. InP자연산화막은 320.deg.C의 온도에서 초기성장이 이루어지고 산소원자들이 InP내부로 확산되는 과정으로 형성되며 산화막 형성에 필요한 활성화에너지는 1.218eV이었다. InP 자연산화마그이 화학적성분은 In$_{2}$)$_{3}$, P$_{2}$O$_{5}$ 및 InPO$_{4}$의 산화물이 혼합하여 구성된다. Au/InP쇼트키다이오드와 InP자연산화막을 게이트절연물로 사용한 MOS 다이오드의 전기적 특성은 다이오드방정식에 따르는 전류-전압특성을 보였다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.11
• /
• pp.105-112
• /
• 1993

Oxide and reoxidized-nitrided-oxide were formed by furnace oxidation and rapid thermal processing (RTP). MOS capacitor and n-MOSFET's with those films as gate insulators were fabricated. The electrical characteristics of insulators were evaluated by current-voltage, high-frequency capacitance-voltage (C-V), and time-dependent dielectrical breakdown (TDDB) measurements. The hot carrier effects of MOSFET's were also investigated. Time-dependent dielectrical breakdown (TDDB) characteristics show that the life time of reoxidized-nitrided-oxide films is about 3 times longer than that of oxides. Hot carrier effects reveal that the life time of MOSFET's with reoxidized-nitrided-oxides is about 3 times longer than that of MOSFET's with oxides. Therefore, it is found that the reliability of dielectric films estimated by the hot carrier effects of MOSFET's is consistent with that of dielectric films from TDDB method.