• 대한공간정보학회지
• /
• 제13권4호
• /
• pp.59-65
• /
• 2005

효율적인 국토관리를 위해서 과거로부터의 토지피복/토지이용 변화를 탐지하고 미래의 도시계획에 반영하는 것은 매우 중요하다고 할 수 있다. 본 연구에서는 시계열 Landsat 영상을 이용하여 토지피복/토지이용 분류를 수행함으로써 도시변화를 분석하고 도시화에 따른 지표온도의 변화를 조사하였다. 해상도 30m의 Landsat 영상에서 도시변화 후보지역을 추출하고 자세한 변화 상황을 고찰하기 위해 고해상도 항공사진을 함께 사용하는 계층적 변화탐지기법을 사용하였다. 또한, 도시의 발달과 지표온도의 상관성을 평가하기 위하여 Landsat 영상의 열적외선 파장영역을 이용하여 온도를 계산하여 실제기온과 비교하고 토지피복별 지표온도를 계산하였다. 연구 결과 도심지의 팽창을 수치적으로 확인 할 수 있었고 도시화로 인한 온도 상승을 탐지할 수 있었다.

• 한국강구조학회 논문집
• /
• 제18권6호
• /
• pp.717-726
• /
• 2006

교량의 보강공법으로 주로 사용되는 외부강봉을 이용한 후인장공법은 적용범위가 넓고 교량의 극한 및 항복에 대한 강성을 증가시켜 휨 보강 효과가 뛰어나지만, 모재접합부의 응력집중, 비효율적인 하중분배, 고정앵커부설치, 유지관리의 어려움 등의 단점이 있다. 본 연구는 기존의 외부강봉을 이용한 후인장공법이 가지는 단점을 보완하고 강판접합공법의 장점을 접목한 새로운 개념의 보강공법으로 커버플레이트의 열변형 특성을 이용한 다단계 프리스트레싱 보강공법을 제안하고자 한다. 커버플레이트의 열변형 특성을 이용한 다단계 프리스트레싱 보강공법은 커버플레이트를 다단계로 가열하여 가열단계별로 거더의 하부플랜지에 고장력볼트로 접합한 뒤, 열원을 제거하여 발생하는 다단계 수축력을 보강에 필요한 프리스트레싱력으로 이용하는 보강공법이다. 커버플레이트의 다단계 프리스트레싱에 의한 보강효과는 커버플레이트의 온도분포와 가열구간에 따라 결정되므로 본 연구에서는 커버플레이트의 열전달 모형실험 및 강거더 모형 실험을 통하여 커버플레이트의 열전달해석과 프리스트레스 도입효과를 분석하였으며, 단경간 강거더 교량을 대상으로 제안된 보강공법의 효율성 및 적용성을 검토하였다.

• 폴리머
• /
• 제36권3호
• /
• pp.281-286
• /
• 2012

두 가지의 종횡비(${\rho}_{\alpha}=a_1/a_3$ and ${\rho}_{\beta}=a_1/a_2$)에 의해 특징지어진 3차원 타원체($a_1$ > $a_2$ > $a_3$)를 사용하여 polypropylene 복합체의 판상형 충전제 함량과 방향이 열팽창률에 미치는 영향에 대해 실험적인 연구를 수행하였다. 측정된 실험적인 값은 Lee와 그의 연구자들이 제안한 이론적인 모델에 의한 계산 값과 비교분석되었다. 판상형 충전제로는 운모와 탈크가 사용되었다. 실험 결과로 운모의 경우 종횡비는 ${\rho}_{\alpha}=13.5$, ${\rho}_{\beta}=1.8$이 사용되어, 20 wt% 함량일 때 ${\alpha}_{11}/{\alpha}_m$는 약 0.56으로 감소하였으나, ${\alpha}_{33}/{\alpha}_m$는 오히려 1.018로 증가함을 보였다. 탈크의 경우의 종횡비는 ${\rho}_{\alpha}=3.7$, ${\rho}_{\beta}=1.4$이었고 ${\alpha}_{11}/{\alpha}_m$는 0.63으로 감소하였다. 결국 운모와 탈크 모두 그 함량증가에 따라 종단방향과 횡단방향에서 열팽창률은 감소하였으나 수직방향에서는 초기 낮은 충전제 함량에서는 오히려 증가하는 경향을 보였다.

• 한국세라믹학회지
• /
• 제36권10호
• /
• pp.1022-1034
• /
• 1999

A relation between composition and properties of Na2O-Al2O3-SiO2 glasses was investigated with application of the extreme vertical design. Properties investigated in this study include glass transition temperature density refractive index thermal expansion electrical conductivity bending strength and hardness, Most of the quadratic models fitted on property data were statistically significant. The properties estimated from the fitted equation agreed well with the measured properties. The estimated properties were compared with those reported by other investigators. Additional composition except for those of extreme vertices were needed to yield a slightly better result for the simple system such as a temary system. In addition an optimal composition on each property could be calculated by using optimization technique on result obtained from the fitted quadratic models.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.614-618
• /
• 2002

In hot strip mills, Portable Roll Scanner (the portable roll surface temperature and profile measuring device) can be used to calibrate on-line Process models for strip crown and flatness by measuring the thermal expansion and wear profile of the rolls. And the surface temperature measurement can be used to optimize the roll cooling system. Portable Roll Scanner consists of the measuring device, which has two contact inductive distance transducers for roll profile measurement and one infrared Pyrometer for surface temperature measurement, and computer-based controller that is equipped with the measuring device. By the wireless data communication, the data is transferred to the memory of notebook for further analysis. After roll extraction from mills, Portable Roll Scanner measure the roll profile and surface temperature simultaneously along the work roll face and display the results in the TFT color monitor of notebook. Portable Roll Scanner is useful at mill-side and roll grinding shop.

• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1452-1461
• /
• 2020

A triple bubbler sensor was tested in LiCl-KCl molten salt from 450 to 525 ℃ in a transparent furnace to validate thermal-expansion corrections and provide additional molten salt data sets for calibration and validation of the sensor. In addition to these tests, a model was identified and further developed to accurately determine the density, surface tension, and depth from the measured bubble pressures. A unique feature of the model is that calibration constants can be estimated using independent depth measurements, which allow calibration and validation of the sensor in an electrorefiner where the salt density and surface tension are largely unknown. This model and approach were tested using the current and previous triple bubbler data sets, and results indicate that accuracies are as high as 0.03%, 4.6%, and 0.15% for density, surface tension, and depth, respectively.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.557-560
• /
• 2006

In the existed study, a fire outbreak in a reinforced concrete structure looses the organism by the different contraction and expansion of hardened cement pastes and aggregate, and causes cracks by thermal stress, leading to the deterioration of the durability. So accurate diagnosis of deterioration is needed based on mechanism of fire deterioration in general concrete structures. Fundamental information and data on the properties of concrete exposed to high temperature are necessary for accurate diagnosis of deterioration. Therefore, this study is willing to propose fundamental data for accurate diagnosis of deteriorated concrete structure by fire damage with experiment according to the curing conditions.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.465-468
• /
• 2006

In the existed study, a fire outbreak in a reinforced concrete structure looses the organism by the different contraction and expansion of hardened cement pastes and aggregate, and causes cracks by thermal stress, leading to the deterioration of the durability. So accurate diagnosis of deterioration is needed based on mechanism of fire deterioration in general concrete structures. Fundamental information and data on the properties of concrete exposed to high temperature are necessary for accurate diagnosis of deterioration. Therefore, this study is willing to propose fundamental data for quick and accurate diagnosis of deteriorated concrete structure by fire damage with experiment according to the design compressive strength.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.292-300
• /
• 1995

According to the number of cold-rolled coils, the amount of roll wear and thermal expansion, and roll gap profile were calculated, by using the actual data from the finishing mill. Also, based on those data, the calculations of the deflection, the flattening, and the contact pressure of vwork rolls and backup rolls were made respectively. Specially, in the calculation of contact pressure, the numerical results were obtained not only during the normal rolling, but also during the abnormal rolling, by modeling mathematically the dynamic impact force which occurs when the head section of the strip is threading through rolls. With those results the growth of the fatigue region and the fatigue damage of rolls were predicted. Also the optimum roll-grinding depth was determined to maximize the roll life.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제8권2호
• /
• pp.11-22
• /
• 2000

Holographic interferometric tomography can provide reconstruction of instantaneous three-dimensional gross flow fields. The technique however confronts ill-posed reconstruction problems in practical applications. Experimental data are usually limited in projection and angular scanning when a field is captured instantaneously or under the obstruction of test models and test section enclosures. An algorithm, based on a series expansion method, has been developed to improve the reconstruction under the ill-posed conditions. A three-dimensional natural convection flow around two interacting isothermal cubes is experimentally investigated. The flow can provide a challenging reconstruction problem and lend itself to accurate numerical solution for comparison. The refractive index fields at two horizontal sections of the thermal plume with and without an opaque object are reconstructed at a limited view angle of 80$\circ$. The experimental reconstructions are then compared with those from numerical calculation and thermocouple thermometry. It confirms that the technique is applicable to reconstruction of reasonably complex, three-dimensional flow fields.