• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.79-79
• /
• 2012

A high temperature and a low temperature plasma process technologies were developed and demonstrated for synthesis, hybrid formation, surface treatment and CVD engineering of nano powder. RF thermal plasma is used for synthesis of spherical nano particles in a diameter ranged from 10 nm to 100 nm. A variety of nano particules such as Si, Ni, has been synthesized. The diameter of the nano-particles can be controlled by RF plasma power, pressure, gas flow rate and raw material feed rate. A modified RF thermal plasma also produces nano hybrid materials with graphene. Hemispherical nano-materials such as Ag, Ni, Si, SiO2, Al2O3, size ranged from 30 to 100 nm, has been grown on graphene nanoplatelet surface. The coverage ranged from 0.1 to 0.7 has been achieved uniformly over the graphene surface. Low temperature AC plasma is developed for surface modification of nano-powder. In order to have a three dimensional and lengthy plasma treatment, a spiral type of reactor has been developed. A similar plasma reactor has been modfied for nano plasma CVD process. The reactor can be heated with halogen lamp.

• Carbon letters
• /
• 제19권
• /
• pp.1-11
• /
• 2016

In efforts to characterize and understand the properties and processing of phenylethynyl-terminated imide (LaRC PETI-5, simply referred to as PETI-5) oligomers and polymers as a high-temperature sizing material for carbon fiber-reinforced polymer matrix composites, PETI-5 imidization and thermal curing behaviors have been extensively investigated based on the phenylethynyl end-group reaction. These studies are reviewed here. In addition, the use of PETI-5 to enhance interfacial adhesion between carbon fibers and a bismaleimide (BMI) matrix, as well as the dynamic mechanical properties of carbon/BMI composites, are discussed. Reports on the thermal expansion behavior of intercalated graphite flake, and the effects of exfoliated graphite nanoplatelets (xGnP) on the properties of PETI-5 matrix composites are also reviewed. The dynamic mechanical and thermal properties and the electrical resistivity of xGnP/PETI-5 composites are characterized. The effect of liquid rubber amine-terminated poly(butadiene-co-acrylonitrile) (ATBN)-coated xGnP particles incorporated into epoxy resin on the toughness of xGnP/epoxy composites is examined in terms of its impact on Izod strength. This paper provides an extensive overview from fundamental studies on PETI-5 and xGnP, as well as applied studies on relevant composite materials.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권5호
• /
• pp.818-826
• /
• 2004

The spray-induced mixing characteristics and thermal decomposition of aqueous urea solution into ammonia have been studied to design optimum sizes and geometries of the mixing chamber in SCR(Selective Catalytic Reduction) system. The cold flow tests about the urea-injection nozzle were performed to clarify the parameters of spray mixing characteristics such as mean diameter and velocity of drops and spray width determined from the interactions between incoming air and injected drops. Discrete particle model in Fluent code was adopted to simulate spray-induced mixing process and the experimental results on the spray characteristics were used as input data of numerical calculations. The simulation results on the spray-induced mixing were verified by comparing the spray width extracted from the digital images with the simulated Particle tracks of injected drops. The single kinetic model was adopted to predict thermal decomposition of urea solution into ammonia and solved simultaneously along with the verified spray model. The hot air generator was designed to match the flow rate and temperature of the exhaust gas of the real engines The measured ammonia productions in the hot air generator were compared with the numerical predictions and the comparison results showed good agreements. Finally, we concluded that the design capabilities for sizing optimum mixing chamber were established.

• 한국주조공학회지
• /
• 제12권4호
• /
• pp.317-325
• /
• 1992

Diamond is the hardest material known to humans, also possesses the highest thermal conductivity and a very low thermal expansion coefficient. Therefore, these properties of diamond make them logical choices for many difficult grinding application. Bonding material is a very important factor to performance of a grinding wheel. Grinding glass constitutes one of the major application areas of diamond grinding wheels, and Cu-Sn tin bronze matrix is widely used as a metal bond of diamond wheel in grinding glass but these studies are rarely reported. The bronze test pieces excluding diamond are sintered by the method of hot sizing respectively at $600^{\circ}C$, $650^{\circ}C$, $700^{\circ}C$, with a composition(Cu-10wt%Sn) on ${\alpha}$ phase and two compositions(Cu-20wt%Sn and Cu-23wt%Sn) on ${\alpha}+{\beta}$ phase. The rupture strength of Cu-10wt%Sn is highest. The bronze bonded diamond wheels are manufactured by same conditions as the bronze test pieces. The results of grinding ratio of wheels are highest in case of Cu-10wt%Sn bonded wheel sintered at $650^{\circ}C$ and grinding power is highest in same composition sintered at $700^{\circ}C$.

• 한국가스학회지
• /
• 제18권4호
• /
• pp.27-34
• /
• 2014

본 연구에서는 단열열량계의 일종인 폭발열량 측정장치를 이용하여 레졸수지 합성반응에서 온도조절 물질이 열폭주 특성에 미치는 영향을 평가하고, 반응열과 활성화에너지 등의 속도론적 데이터를 검토하였다. 그 결과, 온도조절 물질이 투입된 낮은 고형분 농도에서는 폭주반응의 격렬함을 나타내는 순간 특성치들이 감소했다. 그러나 투입된 온도조절 물질의 갑작스런 소실은 급격한 2차 폭주반응을 촉발시켰다. 이때, 레졸수지 합성반응의 폭주반응에 의한 반응열은 페놀을 기준으로 약 157 kJ/mol이었고, 활성화에너지는 약 60 kJ/mol로 나타났다.

• Membrane and Water Treatment
• /
• 제6권6호
• /
• pp.451-476
• /
• 2015

Membrane distillation (MD), which can utilize low-grade thermal energy, has been extensively studied for desalination. By incorporating solar thermal energy, the solar membrane distillation desalination system (SMDDS) is a potential technology for resolving the energy and water resource problems. Small-scale SMDDS (s-SMDDS) is an attractive and viable option for the production of fresh water for small communities in remote arid areas. The minimum-cost design and operation of s-SMDDS are determined by a systematic method, which involves a pseudo steady state approach for equipment sizing and the dynamic optimization using overall system mathematical models. The s-SMDDS employing three MD configurations, including the air gap (AGMD), direct contact (DCMD) and vacuum (VMD) types, are optimized. The membrane area of each system is $11.5m^2$. The AGMD system operated for 500 kg/day water production rate gives the lowest unit cost of $5.92/m^3$. The performance ratio and recovery ratio are 0.85 and 4.07%, respectively. For the commercial membrane employed in this study, the increase of membrane mass transfer coefficient up to two times is beneficial for cost reduction and the reduction of membrane heat transfer coefficient only affects the cost of the DCMD system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.320-323
• /
• 2005

This paper discusses heat problem of IC, which composes the electronic instruments, to guarantee reliability of electronic instruments. And also proposes the unified equivalent model for various electronic instrument products to guarantee reliability and life of its parts. Because electronic instruments are down sizing and operated with high frequency, the internal temperature of electronic instruments is rising steadily. The internal temperature of the electronic instruments gives a big effect to electronic instrument's reliability and life. The semiconductor parts are the representative heat generation parts because of its complicated function, high frequency and high density. Consequently, guaranteeing reliability and life of electronic semiconductor is the important start point in securing the reliability and life of the electronic instrument product. Unfortunately, there are many factors, which affect heat dissipation efficiency. The heat dissipation efficiency follows the environment where the electronic instrument products are used. Therefore it is very difficult to define reliability and life of the electronic manufactures. Electronic instrument products are composed of printed circuit board (PCB), integrated circuit (IC), resistance, and capacitor and so on. And there are superposed thermal resistances, because the parts are arrayed on the printed circuit board (PCB), Therefore the total thermal resistance is variable. Consequently it cannot have same thermal model for each electronic instrument products. In the next part, we propose the unified equivalent model for various electronic instruments. And using the proposed equivalent model proofs the method for analysis reliability of electronic parts.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.257-260
• /
• 2010

고체 추진기관 연소관 내열재의 숯 및 삭마 두께를 예측하기 위한 방법을 제시하였다. 내열재 두께를 계산하기 위해서는 열 및 구조 경계조건을 정확히 알아야 한다. 제안된 방법은 연소관에서 복사, 대류 및 $Al_2O_3$ 조건에서 내열 고무의 열분해 현상을 규명하는데 매우 유용하다. 간단하고 빠르게 고무계 내열재를 초기에 설계하기 위하여 단순화된 수식 과 실험이 사용되었다. 연소관 후방 돔 부위의 숯 및 삭마 두께를 예측하는데 이용이 가능하며 실제 연소 시험을 통하여 적용 가능성을 확인하였다.

• 한국정밀공학회지
• /
• 제8권4호
• /
• pp.118-125
• /
• 1991

Acoustic microscopy has attracted much interest recently as potential nondestructive evaluation technique for detecting and sizing defects of surface and sub-surface. Also acoustic emission testing method has been developed for detecting microcracks which is more than 30${\mu}m$ in length quantitatively on ceramics. In the present paper, acoustic emission during the four point bending test in hot-pressed sintered $Si_3N_4$ specimen which was stressed by thermal shock, has been measured by high sensitive sensing system. The surface and sub-surface cracks were detected by scanning acoustic micrscope of 800 MHz and conventional ultrasonic testing in C-scope image. The purpose was to investigate the location and size of cracks by SAM and AE technique, whose experimental data demonstrate good for detecting microcracks.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.413-416
• /
• 2009

Since the solar radiation is main input for sizing any solar photovoltaic system and solar thermal power system, it will be necessary to understand and evaluate the insolation data. The Korea Institute of Energy Research(KIER) has begun collecting horizontal global insolation data since May, 1982 and direct normal insolation data since December 1992 at 16 different locations. Because of a poor reliability of existing data, KIER's new data will be extensively used by solar energy system users as well as by research institutes. Among some significant results, the yearly averaged horizontal global insolation was turned out 3.61 kWh/$m^2$/day and the yearly mean 5.38 kWh/$m^2$/day of the direct normal insolation was evaluated for clear days.