• 한국태양에너지학회 논문집
• /
• 제28권2호
• /
• pp.50-57
• /
• 2008

This study intends to evaluate the effect on indoor environment(annual thermal load, sunshine)by the application of the movable horizontal shading device on summer and winter season. For these purpose, we supposed the models which are composed of the several horizontal shading devices. Then we analyzed the simulation using the IES5.5.1 and Seoul weather data. The results of this study are as follows: 1) The proper length, angle of horizontal shading device is 2.1m, 28 degree, respectively. 2) The decreasing rate of the annual load of the Movable Horizontal Shading Model(MHSM) in comparison with the No Shading Model(NSM) & Conventional Horizontal Shading Model(CHSM) is 31.11%, 6.63% respectively. 3) The decrease of sunshine of the MHSM on summer season is effective the alleviation of visual displeasure. On the other hand, the increase of sunshine of the MHSM on winter season is effective the psychological comfort. Further study is to be required the sensitivity analysis on the various shading length for the realistic proper shading length.

• Korean Journal of Acupuncture
• /
• 제31권4호
• /
• pp.240-246
• /
• 2014

Objectives : The purpose of this study is to report the clinical effects of Korean medical treatment with Hominis Placenta Pharmacopunture(HPP) on cold hypersensitivity of hands. Methods : A 46-year-old female patient whose chief complaint was cold hypersensitivity of hands was treated with Placenta Pharmacopunture at LI4 and LI10, ten times for a month. Acupuncture and herbal medicine were added depending on the symptoms. Digital Infrared Thermal Imaging(D.I.T.I) was taken and Visual Analog Scale(VAS) was examined before and after each treatment. Results : After the treatments, the symptoms were improved. Conclusions : DITI and VAS showed that the patient's cold hypersensitivity of hands was improved after Korean medical treatment with Hominis Placenta Pharmacopuncture.

• 한국수소및신에너지학회논문집
• /
• 제25권4호
• /
• pp.364-377
• /
• 2014

The performances of a coupled reactor in which a steam reformer and a catalytic combustor were mounted simultaneously had been investigated and compared. The combustible offgas exhausted from the anode of SOFC and MCFC were utilized as heat sources for the endothermic steam methane reforming. The catalytic combustion was used in order to burn the combustible offgas. Thermal energy released by the catalytic combustion is directly transferred to the reformer surrounding the combustor. The various operational conditions such as fuel utilization rate, steam to carbon ratio, amount of catalysts, fuel cell loads were changed. And operating variables were comprehensively identified by sensitivity analysis. The fundamental results from this experimental study show the potential abilities of the coupled reactor. Therefore the results will be of help to design and manufacture the more better coupled reactor in the future.

• 한국안전학회지
• /
• 제28권3호
• /
• pp.123-128
• /
• 2013

The Advanced Power Reactor Plus(APR+), which is a GEN III+ reactor based on the APR1400, is being developed in Korea. In order to enhance the safety of the APR+, a passive auxiliary feedwater system(PAFS) has been adopted in the APR+. The PAFS replaces the conventional active auxiliary feedwater system(AFWS) by introducing a natural driving force mechanism while maintaining the system function of cooling the primary side and removing the decay heat. As the PAFS completely replaces the conventional AFWS, it is required to verify the cooling capacity of PAFS for the core damage frequency(CDF) evaluation. For this reason, this paper discusses the cooling performance of the PAFS during transient accidents. The test case and scenarios were picked from the result of the sensitivity analysis in APR+ Probabilistic Safety Assessment(PSA). The analysis was performed by the best estimate thermal-hydraulic code, RELAP5/.MOD3.3. This study shows that the plant maintains the stable state without the core damages under the given test scenarios. The results of PSA considering this analysis' results shows that the CDF values are decreased. The analysis results can be used for more realistic and accurate performance of a PSA.

• 한국항해항만학회지
• /
• 제31권9호
• /
• pp.763-769
• /
• 2007

A narrow loop noise bandwidth method is desirable to reduce the error of raw measurements due to the thermal noise. However, it degrades the performance of GPS initial synchronization such as mean acquisition time. And it restricts the loop noise bandwidth to a fixed value determined by the lower bound of the allowable range of carrier-to-noise power ratio, so that it is difficult to optimally track GPS signal. In order to make up for the weak points of the fixed-type narrow loop noise bandwidth method and simultaneously minimize the error of code and carrier measurements, this paper proposes a stepwise-type adaptive bandwidth algorithm for DGPS reference receivers. In this paper, it is shown that the proposed adaptive bandwidth algorithm can provide more accurate measurements than those of the fixed-type narrow loop noise bandwidth method, in view of analyzing the simulation results between two signal tracking algorithms. This paper also carries out sensitivity analysis of the proposed adaptive bandwidth algorithm due to the estimation uncertainty of carrier-to-noise power ratio. Finally the analysis results are verified by the experiment using GPS simulator.

• 센서학회지
• /
• 제17권5호
• /
• pp.361-368
• /
• 2008

Nanosized $SnO_2$ particles were synthesized by homogeneous precipitation method using tin chloride ($SnCl_4{\cdot}5H_{2}O$) and urea ($CO(NH_2)_2$). The powders were heated at $500^{\circ}C$ and $600^{\circ}C$ for 2h. The crystal structure, microstructure, thermal behavior, specific surface area were analyzed using XRD, FE-SEM, TGA and BET, respectively. The initial resistance and the $H_2$ sensing properties were measured as a function of ${Sb_2}{O_3}$ and Pd doping concentrations. The resistance was decreased with the addition of ${Sb_2}{O_3}$ and the sensitivity for $H_2$ gas was increased with the addition of Pd. Thus, the optimum $H_2$ gas sensing property was obtained in the 0.25.mol% ${Sb_2}{O_3}$ and 1.w% added $SnO_2$ powders.

• 폴리머
• /
• 제24권3호
• /
• pp.407-417
• /
• 2000

고분자 주쇄에 cyclobutane 또는 페닐과 방향족 술포닐옥시이미드 구조를 갖는 감광성 폴리이미드를 합성하여 광분해 특성에 있어서 고분자의 구조가 미치는 영향을 조사하였다. 폴리이미드는 N-히드록시와 염화 술포닐의 축중합에 의해 제조하였다. 합성된 폴리이미드는 25$0^{\circ}C$까지 열분해가 일어나지 않고 안정하였다. 254nm의 광조사에 따른 폴리이미드의 광분해는 분광학적 측정에 의해 N-O 결합의 절단 또는 이미드 moiety의 계열에 기인되는 것을 알 수 있었다. 본 연구의 폴리이미드는 포지티브형의 광분해성 고분자로의 활용이 가능한 것이 확인되었으며, 특히 pyromellitic diimide moiety를 함유하는 폴리이미드의 포지티브 화상은 높은 감도와 해상도를 나타내었다.

• 한국화재소방학회논문지
• /
• 제23권3호
• /
• pp.103-109
• /
• 2009

콘크리트의 온도에 의한 재료적 특성에 대한 저감은 두 가지 메커니즘에 기인한다. 첫 번째 메커니즘은 온도범위에 따른 구성성분의 상변화이다. 초기 구성성분들은 온도 증가로 인해 다른 성분들로 상변화를 일으킨다. 두 번째 메커니즘은 온도에 의한 각 구성성분의 역학적 특성 변화이다. 따라서 고온에 노출된 콘크리트의 재료적 특성에 관한 모델 역시 이 두 가지 메커니즘을 함께 고려하여 제시되어야 한다. 본 연구는 위에서 언급한 두 가지 메커니즘을 고려한 고온에 노출된 콘크리트의 재료적 특성 모델을 제안하기 위한 기반연구로서, 온도범위에 따른 상변화를 고려한 경화된 시멘트 페이스트의 공극률에 대한 이론적 모델을 제시한다.

• Advances in aircraft and spacecraft science
• /
• 제7권2호
• /
• pp.135-149
• /
• 2020

In the current paper, a generalization of the results of Zhao et al. (2008) on a new design of C/C composite multidisc brake system is presented. The purpose of this paper is to study the effect of thermal sensitivity of Carbon/Carbon (C/C) composite material on the temperature distributions, deformation, and stress during braking. In this regard, a transient temperature-displacement coupled analysis for C/C composite brake discs with frictional heat generation under simulated operating conditions is performed. An axisymmetric model for brake system is used for the finite element analysis according to the theory of energy transformation and transportation. The transient temperature distributions on the friction surfaces, deformation, and stress are obtained. To check the validity, the results are corroborated with other solutions available in the literature, wherever possible. The current study could be used as a guide in the initial design of a high performance multidisc brake system.

• 한국추진공학회지
• /
• 제19권3호
• /
• pp.96-102
• /
• 2015

기존에 사용되고 있는 대부분의 추진물질들은 연소 시 이산화탄소, 염산가스 등의 환경유해 물질을 다량 발생시킨다. 본 연구에서는 이러한 문제점을 개선하기 위한 테트라진 계열의 저탄소 고질소 화합물인 DAAT의 합성공정을 확립하였다. 또한, 문헌에 빠져있는 구체적인 공정법 및 특성 분석 결과를 서술하였다. 그리고 분광분석(NMR, IR)을 통한 DAAT의 구조분석과 열, 충격, 마찰 안정성을 측정하였고, Gaussian 09와 EXPLO5를 이용하여 생성열과 폭발 특성(폭압, 폭속) 등을 계산하였다.