• 콘크리트학회논문집
• /
• 제13권4호
• /
• pp.305-313
• /
• 2001

본 연구에서는 콘크리트 열전도율의 영향인자에 대하여 TLPP원리를 응용한 QTM-D3 장비를 이용하여 실험을 실시하였고, 이들 실험결과를 이용하여 콘크리트의 열전도율을 예측하는 모델식을 제안하였다. 본 연구를 통하여 얻은 결론은 다음과 같다. 콘크리트, 모르타르 및 페이스트의 열전도율에 미치는 주요 영향인자를 구명하기 위해 본 연구에서 선택된 실험변수는 재령, 골재 함유량, 시멘트 함유량, 결합재 종류, 잔골재율, 시편의 온도 및 함수상태로 총 7가지이다. 이중에서 골재 함유량과 함수상태가 콘크리트 열전도율의 주요 영향인자임을 알 수 있었다. 그리고 시멘트 사용량이 많은 페이스트나 모르타르의 경우 시멘트 함유량이나 결합재 종류에 의해서도 열전도율이 영향을 받고 있다. 그러나 재령은 콘크리트의 열전도율에 큰 영향을 미치지 않음을 알 수 있었다. 콘크리트 열전도율에 주요 영향인자인 골재 함유량, 잔골재율, 시편의 온도 및 함수상태를 이용하여 콘크리트의 열전도율을 계산할 수 있는 모델식을 제안하였다.

• 한국건설순환자원학회논문집
• /
• 제10권3호
• /
• pp.195-203
• /
• 2022

본 논문에서는 바텀애시 골재의 크기 구성과 가압다짐이 다공성 콘크리트의 열전도도에 미치는 영향을 분석하였다. 본 실험연구에서는 바텀애시를 두 가지 입도의 골재를 섞은 SA와 한 가지 입도만을 갖는 DA를 사용하여 골재 특성을 파악한 후, 다공성 콘크리트 골재로 활용하였다. 물-바인더 비는 0.30으로 고정하고, 가압다짐을 0.5, 1.5 및 3.0 MPa을 콘크리트 시편에 적용하였다. 단위중량, 총 공극률 및 열전도도를 측정하고 분석을 수행하였다. 가압다짐이 증가할 때 단위중량과 열전도도는 증가하고 총공극률은 감소하였다. DA 사용 콘크리트에 비해 SA 사용 콘크리트의 단위중량과 열전도도는 크고 총공극률은 작게 나타난다. 또한, 오븐건조상태 시편의 열전도도가 기건상태 시편의 열전도도보다 낮은 결과를 나타냈다. 회귀분석을 통해 다공성 콘크리트의 단위중량, 총 공극률 및 열전도도와의 상관관계를 제시하였다. 열전도도와 단위중량은 서로 비례하는 상관관계를 나타내며, 열전도도와 총공극률은 서로 반비례하는 상관관계를 나타냈다.

• 한국건설순환자원학회논문집
• /
• 제11권4호
• /
• pp.542-551
• /
• 2023

본 논문에서는 바텀애시 골재에 천연 잔골재를 혼입한 다공성 콘크리트의 열적 특성을 분석하였다. 본 연구에서는 바텀애시 골재에 천연 잔골재를 사용하여 각 골재의 재료 특성을 파악 한 후, 다공성 콘크리트의 골재로 사용하였다. 물-바인더 비는 0.25으로 고정하여, 가압다짐을 0.5, 1.5 및 2.5 MPa 수준으로 지정하여 다공성 콘크리트 시편을 제작하였다. 단위질량, 총 공극률 및 열전도도 실험을 진행하고 분석을 수행하였다. 가압다짐 수준이 증가하고, 천연잔골재 혼입률이 증가하면 단위질량과 열전도도 값은 증가하였으며, 총 공극률 값은 감소하였다. 또한, 다공성 콘크리트의 단위질량과 총 공극률, 열전도도 상관관계 그래프를 제시하여 해외 실험 사례와 비교 분석하였다. 이후 실험 결과에 대한 회귀 분석을 진행하여 상관계수(R²) 값을 분석하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.946-951
• /
• 1998

In order to calculate the thermal stresses of massive concrete structures in non-steady state conditions the thermal properties of the materials have to be well known. Structural materials such as concrete, rock and soil are heterogeneous, damp and porous so that measurements of their thermal properties by conventional methods would result in large errors. In this study, thermal conductivity was measured by the device, QTM-D3 which is usually used in Japan. Variables are chosen as age, water content, temperature, aggregate content, S/A ratio and type of cementitious materials. Finally a model for thermal conductivity was proposed.

• 한국재료학회지
• /
• 제32권10호
• /
• pp.429-434
• /
• 2022

There is ongoing research to develop lithium ion batteries as sustainable energy sources. Because of safety problems, solid state batteries, where electrolytes are replaced with solids, are attracting attention. Sulfide electrolytes, with a high ion conductivity of 10^-3 S/cm or more, have the highest potential performance, but the price of the main materials is high. This study investigated lithium hydride materials, which offer economic advantages and low density. To analyze the change in ion conductivity in polymer electrolyte composites, PVDF, a representative polymer substance was used at a certain mass ratio. XRD, SEM, and BET were performed for metallurgical analyses of the materials, and ion conductivity was calculated through the EIS method. In addition, thermal conductivity was measured to analyze thermal stability, which is a major parameter of lithium ion batteries. As a result, the ion conductivity of LiH was found to be 10^-6 S/cm, and the ion conductivity further decreased as the PVDF ratio increased when the composite was formed.

• 설비공학논문집
• /
• 제16권3호
• /
• pp.211-217
• /
• 2004

Effect of a solid insert on thermal stratification in the natural convection enclosure is numerically investigated. The enclosure consists of two differently heated vertical walls and two adiabatic horizontal walls. A solid insert is located in the middle of the enclosure. The non-dimensional governing equations are solved by using the SIMPLER algorithm. The computations are carried out with the variations of thermal conductivity, width and height of the solid insert. The Prandtl number of the fluid in an enclosure is fixed at Pr=0.71, Two cases of Rayleigh number are considered in the present study, i.e., Ra:10$^3$ and 10$^{6}$ . The thermal stratification attenuates as thermal conductivity, width, and height of the solid insert are increased. As the thermal conductivity ratio of a solid insert to fluid increases beyond (equation omitted)10$^3$, the thermal stratification ratio shows an asymptotic value.

• Korea-Australia Rheology Journal
• /
• 제17권2호
• /
• pp.35-40
• /
• 2005

Nanofluid is a novel heat transfer fluid prepared by dispersing nanometer-sized solid particles in traditional heat transfer fluid to increase thermal conductivity and heat transfer performance. In this research we have considered the rheological properties of nanofluids made of CuO particles of 10-30nm in length and ethylene glycol in conjunction with the thermal conductivity enhancement. When examined using TEM, individual CuO particles have the shape of prolate spheroid of the aspect ratio of 3 and most of the particles are under aggregated states even after sonication for a prolonged period. From the rheological property it has been found that the volume fraction at the dilute limit is 0.002, which is much smaller than the value based on the shape and size of individual particles due to aggregation of particles. At the semi-dilute regime, the zero shear viscosity follows the Doi-Edwards theory on rodlike particles. The thermal conductivity measurement shows that substantial enhancement in thermal conductivity with respect to particle concentration is attainable only when particle concentration is below the dilute limit.

• 한국주조공학회지
• /
• 제9권1호
• /
• pp.80-88
• /
• 1989

SGCI(Spheroidal Graphite Cast Iron), CVGCI(CV Graphite Cast Iron) and FGCI(Flake Graphite Cast Iron) having different contents of Mn($0.25%{\sim}0.85%$) and Ni($0.3%{\sim}1.2%$) were produced, respectively. The thermal expansion and thermal conductivity of the cast iron were investigated in the temperature range of $50^{\circ}C{\sim}300^{\circ}C$. As the graphite nodularity of the cast iron increases, thermal expansion coefficient increases, thermal conductivity and electrical conductivity to thermal conductivity ratio decrease. The thermal expansion coefficient of the cast iron increases with increasing Mn content and decreases with increasing Ni content. The thermal conductivity of the cast iron decreases with increasing Mn and Ni contents.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.77-78
• /
• 2022

To improve the fire vulnerability of the organic insulation sandwich panel core, which is the main culprit of the large-scale fire disaster, an experiment was conducted to examine the thermal conductivity properties of the core material mixed with the organic insulation material EPS Bead and the inorganic insulation material glass wool. As the Additional ratio of glass wool increased, the thermal conductivity decreased, and it was determined that the replacement of glass wool of 3% or more had little effect on the decrease in thermal conductivity. In addition, it can be seen that the most ideal thermal conductivity is exhibited when 1% Replacement ratio of EPS and 3% glass wool are added. The core material of such organic and inorganic insulation materials is judged to be a core material that can compensate for the fire vulnerability of existing insulation materials. Therefore, in order to determine whether it is used as a core material for sandwich panels, additional studies such as fire resistance experiments and sound absorption experiments are needed in the future.

• 한국분말재료학회지
• /
• 제17권4호
• /
• pp.270-275
• /
• 2010

Ethylene glycol-based Cu nanofluids were prepared by pulsed wire evaporation (PWE) method. The structural properties of Cu nanoparticles were studied by X-ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM). The average diameter and Brunauer Emmett Teller (BET) surface area of Cu nanoparticles were about 100 nm and $7.46\;m^2/g$, respectively. The thermal conductivity and viscosity of copper nanofluid were measured as functions of Cu concentration and temperature. As the volume fraction of Cu nanoparticles increased, both the enhanced ratios of thermal conductivity and viscosity of Cu nanofluids increased. As the temperature increased, the enhanced ratio of thermal conductivity increased, but that ratio of viscosity decreased.