• Structural Engineering and Mechanics
• /
• 제84권6호
• /
• pp.783-798
• /
• 2022

This study attempts to investigate the impact of thickness stretching and nonlinear hygro-thermo-mechanical loading on the bending behavior of FG beams. Young's modulus, thermal expansion, and moisture concentration coefficients vary gradually and continuously according to a power-law distribution in terms of the volume fractions of the constituent materials. In addition, the interaction between the thermal, mechanical, and moisture loads is involved in the governing equilibrium equations. Using the present developed analytical model and Navier's solution technique, the numerical results of non-dimensional stresses and displacements are compared with those obtained by other 3D theories. Furthermore, the present analytical model is appropriate for investigating the static bending of FG beams exposed to intense hygro-thermo-mechanical loading used for special technical applications in aerospace, automobile, and civil engineering constructions.

• 터널과지하공간
• /
• 제9권1호
• /
• pp.1-11
• /
• 1999

열-수리-역학적 상호작용을 해석하기 위한 유한요소 코드가 개발되었다. 이 코드는 Noorishad(1984)에 의해 제시된 유한요소 수식화에 기초하였으며, 절리 거동은 Goodman 의 절리 구성 모델로 모사되었다. 개발된 코드가 각각 절리가 있거나 없는 두가지 종류의 수갱 모델에 대한 T-H-M 상호작용 해석에 적용되었다. 절 리가 없는 모델에 대해서, 수갱벽면으로부터 바깥 방향으로 온도 증가가 뚜렷이 나타났다. 절 리가 있는 모델에 대해서, 절리의 닫힘이 열팽창에 의해 생겼으며, 물이 암석기질보다 낮은 열 전도도와 높은 비열용량을 보이기 때문에 절리를 따라 온도 분포가 상대적으로 낮게 나타났다. 또한 절리 내에서의 열 유동의 영향이 암반내에서의 수리유동의 영향보다 더 크다고 결론내릴 수 있다.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1994년도 추계학술발표회 초록집
• /
• pp.135-140
• /
• 1994

An improved steam generator model has been developed for the DSNP simulation of normal operational transient behavior of CANDU nuclear power plant. For more realistic prediction of steam generator behavior during transient, tube bundle region is divided into two separate control volumes, subcooled region and saturated region, and the variation of thermal hydraulic properties in the control volume is accounted for more realistic estimates of outlet enthalpy of each control volume. Test results for typical CANDU operational transient case show reasonable transient behavior of steam generator with overall CANDU operation and improved operational characteristics of steam generator with power variation.

• 마이크로전자및패키징학회지
• /
• 제29권3호
• /
• pp.43-48
• /
• 2022

본 연구에서는 재료의 이방성 점탄성 거동을 고려한 해석 기법을 개발하여 휨(Warpage) 해석의 정합성을 개선하고자 하였다. 먼저, 이방성 점탄성 거동 구현을 위해 구리 패턴(Cu trace) 및 범프(Bump)가 존재하는 패키지를 모델링 하였다. 복잡한 형상의 범프 영역은 대표체적요소 모델을 기반으로 등가 이방성 점탄성 물성 및 열 팽창계수를 도출하였다. 도출된 물성을 기반으로 패키지에 0~125도의 열 주기(Thermal cycle)를 가하였으며, 열 주기에 따른 패키지의 휨 경향을 확인하였다. 해석 결과의 검증을 위해 해석 모델과 동일한 패키지를 제작하였고, 쉐도우 모아레 간섭계(Shadow Moire interferometer)를 통해 열 주기에 따른 실제 패키지의 휨 정도를 측정하였다. 결과적으로 구리 패턴, 범프 등의 요소가 고려된 등가 이방성 점탄성 해석 기법의 적용으로 5 ㎛ 이내의 오차로 패키지의 휨 정도를 계산하고 휨의 형태를 예측할 수 있었다.

• 한국포장학회지
• /
• 제21권3호
• /
• pp.107-113
• /
• 2015

This work focused on the study of thermal properties and kinetic behavior of LDPE-nanoclay composite films. The effect of nanoclay content (0.5, 1, 3, and 5 wt%) on thermal stability and crystallization characteristics of the nanocomposites were investigated by Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). The results from endothermic curve showed that the nanoclay played an important role in the crystallization of nanocomposites by acting as nucleating agent. From exothermic curve, there was a crystallization temperature shift which was attributed to crystallization process induced by nanoclay. The TGA results showed that the addition of nanoclay significantly increased the thermal stability of LDPE matrix, which was likely due to the characteristic of layered silicates/clays dispersed in LDPE matrix as well as the formation of multilayered carbonaceous-silicate char. A well-known Coats-Redfern method was used to evaluate the decomposition activation energy of nanocomposite. It was demonstrated that introducing of nanoclay to LDPE matrix escalated the activation energy of nanocomposite decomposition resulting in thermal stability improvement.

• KSTLE International Journal
• /
• 제1권2호
• /
• pp.95-100
• /
• 2000

The thermal behaviors of disk-pad braking models has been analyzed for a high-speed train brake system using the coupled thermal-mechanical analysis technique. The temperature distribution, thermal distortion, and contact stress in the disk-pads contact model have been investigated as functions of the convective heat transfer rate. The FEM results indicate that multiple spot type pads show more stabilized thermal characteristics compared with those of the flat type pads for the increased convective heat transfer rate. The maximum contact stress for a friction pad loaded against a rubbing disk was occurred on the edge of the pad at the disk-pad interface.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.281-286
• /
• 1999

Nonlinear temperature distribution induced by the hydration heat generates thermal stress in mass concrete. At early ages, such thermal stress may induce thermal cracks in the structure which can affect on the durability and safety of the structure. Up to now, a lot of works have focused on the prediction of temperature distribution and thermal stress in the structure. In most of such works, however, the inside of structure was considered as adiabatic state to predict temperature distribution and the thermal stress. And due to the lacks of appropriate analysis models after crack, there was little research on the crack occurrence. This paper deals with the prediction of the temperature distribution in the structure using the rate of hydration heat generation and also estimates the behavior of structure before and after cracking due to hydration heat using crack band model.

• 한국레이저가공학회지
• /
• 제12권2호
• /
• pp.17-25
• /
• 2009

Two methodologies for predicting thermal relaxation time of tissue subjected to pulsed laser irradiation is introduced by the calculation the optical penetration depth and by the investigation of the temperature diffusion behavior. First approach is that both x-axial and y-axial thermal relaxation times are predicted and they are superposed to achieve the thermal relaxation time (${\tau}_1$) for two-dimensional square tissue model. Another approach to achieve thermal relaxation time (${\tau}_2$) is measuring the time required for local temperature drop until $e^{-1}$ of the maximum laser induced heating.

• 한국생산제조학회지
• /
• 제5권4호
• /
• pp.90-97
• /
• 1996

The thermal deformation of a machine tool spindle influences the performance of the manufacturing systems for precision products. In this research, thermal analysis of a high speed machine tool spindle with the rolling bearing and the built-in motor is carried out by using Finite Difference Method. The thermal boundary conditions describing the heat generation in the bearing and built-in motor are considered in the simulation. And various convective boundary conditions are assumed with the empirical formula in the references. From the simulation results, the characteristics of each element affecting the dynamic thermal behaviour of the machine tool spindle system have been clarified. Therefore, this model can be well applied to the future development of the high speed spindle systems.

• 대한기계학회논문집B
• /
• 제28권6호
• /
• pp.688-696
• /
• 2004

Nonlinear dynamic behavior of diffusive-thermal instability in diluted CH$_4$/O$_2$ diffusion flames is numerically investigated by adopting detailed chemistry and transport. Counterflow diffusion flame is adopted as a model flamelet. Particular attention is focused on the pulsating-instability regime, which arises for Lewis numbers greater than unity, and the instability occurs at high strain rate near extinction condition in this flame configuration. Once a steady flame structure is obtained for a prescribed value of initial strain rate, transient solution of the flame is calculated after a finite amount of strain-rate perturbation is imposed on the steady flame. Transient evolution of the flame depends on the initial strain rate and the amount of perturbed strain rate. Basically, the dynamic behaviors can be classified into two types, namely non-oscillatory decaying solution and diverging solution leading to extinction. The peculiar oscillatory solution, which has been found in the previous study adopting one-step chemistry and constant Lewis numbers, is net observed in this study, which is attributed to both convective flow and preferential diffusion effects.