• 상하수도학회지
• /
• 제25권6호
• /
• pp.971-979
• /
• 2011

Palm Oil Mill Effluent (POME) is the mixed organic wastewater generated from palm oil industry. In this study, kinetic analysis with treating POME in an anaerobic hybrid reactor (AHR) was performed. Therefore, the AHR was monitored for its performances with respect to the changes of COD concentrations and hydraulic retention time (HRT). Batch tests were performed to find out the substrate removal kinetics by granular sludge from POME. Modified Stover Kincannon, First-order, Monod, Grau second-order kinetic models were used to analyze the performance of reactor. The results from the batch test indicate that the substrate removal kinetics of granular sludge is corresponds to follow Monod's theory. However, Grau second-order model were the most appropriate models for the continuous test in the AHR. The second order kinetic constant, saturation value constant, maximum substrate removal rate, and first-order kinetic constant were 2.60/day, 41.905 g/L-day, 39.683 g/L-day, and 1.25/day respectively. And the most appropriate model was Grau second-order kinetic model comparing the model prediction values and measured COD concentrations of effluent, whereas modified Stover-Kincannon model showed the lowest correlation.

• The Korean Journal of Ceramics
• /
• 제6권2호
• /
• pp.100-102
• /
• 2000

Co fine particles were dispersed in Au metal and $AlO_x$ amorphous matrices by vacuum evaporation and rf-sputtering, respectively, thus forming granular composite films having chemical compositions of $Co_{0.59}-Au_{0.41}$ and $Co_{0.52}/(AlO_x$)_{0.48}$. The films were annealed at 200~$500^{\circ}C$ to increase the size of the Co particles, from 30$\AA$ to 180$\AA$ in the Au matrix and 40$\AA$ to 180$\AA$ in the $AlO_x$ matrix, as revealed by X-ray diffraction analysis. The Co metal in as-deposited films have saturation magnetization equivalent to that of bulk Co, which is unchanged by the annealing, showing that the Co metal is not oxidized by the annealing. Magneto-optical Kerr rotation measured at $\lambda$=400-900nm for the $Co_{0.59}-Au_{0.41}$ film as deposited is larger than that calculated for the composition. The rotation increases as the film is annealed at $200^{\circ}C$ and $300^{\circ}C$, approaching to that of bulk Co. The Kerr rotation for the $Co_{0.52}-(AlO_x)_{0.48}$ film as deposited is smaller than that calculated for the composition based on Bruggeman effective medium theory. However, the rotation increases much, exceeding the rotation of the bulk Co as annealed at $300^{\circ}C$ and $400^{\circ}C$. As a possible origin of the marked magneto-optical enhancement a weak localization of light in granular structure is suggested.

• 기술혁신학회지
• /
• 제16권4호
• /
• pp.937-953
• /
• 2013

경제변동의 원인과 발생과정 그리고 발전방향에 대한 이론적 논의가 활발하게 전개되고 있다. 본 연구는 경제변동에 대한 설명이론으로 네트워크 이론[Acemoglu, et al. 2012, 2010]을 적용하여 우리나라 경제변동성에 대한 실증적 연구를 수행하였다. 2000년도, 2005년도와 2010년도 3개년도 산업연관표를 적용하여 실시한 실증분석결과를 보면, 다음과 같이 분석결과를 요약할 수 있다. 먼저 우리나라 경제구조는 2000년도에 비하여 2005년도 그리고 2010년도가 1차 상호연결성과 2차 상호연결성의 파레토분포 인자가 지속적으로 높아지고 있다. 이러한 분석결과로부터 우리나라 네트워크 경제구조는 과거에 부문사이에 높은 연결성을 갖는 경제구조에서 그 연결성이 낮아지고 있는 경제구조로 변화하고 있음을 알 수 있다. 둘째, 유클리드 놈으로 측정된 우리나라 산업부문사이에 평균 영향력 벡터는 2000년도에 비하여 2005년도 그리고 2010년도에 더욱 낮아졌다. 이 분석결과는 핵심적 산업부문의 영향력이 낮아지고 있음을 보여주며, 산업부문사이에 투입과 산출의 상호연결성이 약화되고 있음을 보여 준다. 이 분석결과는 한 부문의 경제적 충격이 느리게 진행되는 특징이 존재하지만, 전체 경제에 그 부문충격이 2000년대 초기에 비하여 상대적으로 완화되었음을 보여준다. 이러한 연구결과를 바탕으로 몇 가지 산업 및 기술정책적 시사점을 제시하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권2호
• /
• pp.54-63
• /
• 1994

Mg thin films were prepared on SPCC(cold-rolled steel) substrates by vasuum evapoaration and ion-plating. The influence of argon gas pressure and substrates bias voltage on the crystal orientation and morphology of the film was determined by using X-ray diffraction and scanning electron micrography (SEM), respectively. And the effect of crystal orientation and morphology of the Mg thin films on corrosion behavior was estimated by measuring the anodic polarization curves in deaerated 3% NaCl solution. The crystal orientation of the Mg films deposited at high argon gas pressure exhibited a (002) preferred orientation, regardless of the substrate bias voltage. Film morphology changed from a columnar to a granular structure with the increase of argon gas pressure. The morphology of the films depended not only on argon gas pressure but also bias voltage ; i.e., the effect of increasing bias voltage was similar to that of decreasing argon gas pressure. The influences of argon gas pressure and bias voltage were explained by applying the adsorption inhibitor theory and the sputter theory. And also, this showed that the corrosion resistance of the Mg thin films can be changed by controlling the crystal orientaton and morphology.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.245-252
• /
• 2002

The roughness of Joomoonjin sand and the Dongchun river sand was analysed by the fractal theory. It was found that the fractal dimension(D$\_$F/) of Joomoonjin sand is a little smaller than the Dongchun river sand. That means Joomoonjin sand is smoother than the Dongchun river sand. The measurements of D$\_$F/ of different fraction of the Donchun river sand showed that large particles were rougher than fine particles. The shapes of both sands were analysed by the Discrete Fourier Transform(DFT) and the Grid-based(GB) method. Normalization of coefficients with respect to size, starting point and its orientation made the coefficients invaried to these characteristics. The mean of the normalized coefficients was used to reconstruct the average shape for both sands, respectively. The measurements of the ellipticity ratio of different fraction of both sands showed that Joomoonjin sand is slightly flatter than the Dongcun river sand.

• 한국농공학회지
• /
• 제37권2호
• /
• pp.64-72
• /
• 1995

A series of cubical triaxial tests with three independent principal stresses was per- formed on Baekma river sand( # 40~100). It was found that the major principal strain at failure remained approximately constant for b values larger than about 0.3 for both the drained and undrained condition, and thereafter increased as b value decreased. The test results showed that the direction of the strain increment at failure form acute angles with the failure surfaces for both the drained and undrained condition. The results were thus not in agreement with the normality condition from classic plasticity theory. Howev- er, it was found that the projections of the plastic strain increment vectors on the octahe- dral plane were perpendicular to the failure surface in that plane. Failure strength in terms of effective stress anlaysis was greatly influenced by the variation of intermediate principal stress and so was failure criterion. The effective stress failure surfaces for both the drained and undrained condition were estimated quite well by use of Lade's failure criterion.

• Journal of Information Processing Systems
• /
• 제16권1호
• /
• pp.184-200
• /
• 2020

Similarity searching is a basic issue in information processing because of the large size of formal contexts and their complicated derivation operators. Recently, some researchers have focused on knowledge reduction methods by using granular computing. In this process, suitable information granules are vital to characterizing the quantities of attributes and objects. To address this problem, a novel approach to obtain an entropy-weighted concept lattice with inclusion degree and similarity distance (ECLisd) has been proposed. The approach aims to compute the combined weights by merging the inclusion degree and entropy degree between two concepts. In addition, another method is utilized to measure the hierarchical distance by considering the different degrees of importance of each attribute. Finally, the rationality of the ECLisd is validated via a comparative analysis.

• 한국지반공학회논문집
• /
• 제21권4호
• /
• pp.13-20
• /
• 2005

본 연구에서는 혼입재료의 혼합비와 입자 형태에 따른 혼합토의 압밀 거동 특성을 평가하고자 압밀 시험과 수치해석을 실시하였다. 실험 대상인 혼합토는 매질인 준설점토와 혼입재료인 파쇄된 굴패각(혹은 모래)으로 구성하였다. 응력분담률이라는 개념을 이용하여 혼합토의 압밀특성을 파악하고 Mikasa압밀이론을 이용한 유한차분 수치해석을 실시하였다. 그 결과, 혼입재료에 따라 혼합토의 압밀 거동에 차이가 있음을 증명하였다. 같은 양의 조립재가 혼합되어 있는 경우 굴패각 혼합토의 점토 매질의 압축성이 모래혼합토의 경우보다 작게 나타났다.

• 상하수도학회지
• /
• 제8권1호
• /
• pp.27-33
• /
• 1994

With the rapid industrialization, an ever-increasing quantity and kind of new organic compounds pose environmental problems due to their toxicity and physiological effect. However, research on the biodegradation of these compounds under anaerobic condition is very limited inspite of its efficiency and economical advantage. In this research, the pH effect on the ring cleavage of phenol under anaerobic condition was investigated, and the theory of phase separation was applied to the degradation of phenol for investigating the role of acidogenic bacteria. Results, obtained from biochemical methane potential(BMP) assay for 15.5 days of incubation, showed that acidic condition was more desirable for phenol degradation than alkaline condition. By both unacclimated methanogenic granular sludge and two mixed cultures, phenol was completely removed within six weeks of incubation with a gas conversion rate of over 86% of theoretical one. However, phenol was not degraded by unacclimated acidogenic culture, and thus it is considered as a syntrophic substrate. In case of phase separated biochemical methane potential(PSBMP) assay, in which acidogenic and methanogenic culture were seeded separately and consecutively, those that had been subjected to normal acidogens for 3 to 4 weeks showed higher gas production than those seeded with sterile or frozen culture.

• 반도체디스플레이기술학회지
• /
• 제14권4호
• /
• pp.38-44
• /
• 2015

In this paper, numerical simulations on conical fluidized bed combustors were carried out to estimate the effect of coefficients of restitution between particle and particle and particle to wall on hydrodynamics and heat transfer. The Eulerian-Eulerian two-fluid model was used to simulate the hydrodynamics and heat transfer in a conical fluidized bed combustor. The solid phase properties were calculated by applying the kinetic theory of granular flow. Simulations results show that increasing the restitution coefficient between the particle and particle results in increasing the bed pressure drop. On other hand, the increasing of particle to wall coefficient of restitution results in decreasing the bed pressure drop. It is found that the coefficient of restitution has little effect on heat transfer.