• 한국도로학회논문집
• /
• 제9권4호
• /
• pp.215-226
• /
• 2007

차량방호 안전시설에 대한 성능의 검증은 충돌시험의 가속도와 각속도 데이터를 사용하여 산정한 탑승자 안전지수를 평가하여 이루어진다. 탑승자 안전지수로는 THIV(Theoretical Head Impact Velocity), PHD(Post-impact Head Deceleration), ASI(Acceleration Severity Index), OIV(Occupant Impact Velocity)와 ORA(Occupant Ridedown Acceleration)가 있다. 탑승자 안전지수 계산에 상이한 데이터 처리과정과 수치절차의 적용이 가능하기 때문에 동일한 시험 데이터에 대하여 다양한 탑승자 안전지수값이 결정될 수 있어서 혼란이 초래되고 있는 실정이다. 이러한 문제를 해결하기 위하여 다양한 상세절차와 데이터 처리과정이 탑승자 안전지수에 미치는 영향을 조사하였다. 지침에 제시된 계측시간간격을 사용하여 차량충돌시험이 수행된다면 보간법과 수치적분방법은 THIV와 OIV 값에 영향을 크게 미치지 않았다. 그리고 PHD에 대한 10msec 이동평균방법과 데이터 처리과정의 영점보정은 탑승자 안전지수에 상당한 영향을 미치기 때문에 이에 관한 구체적인 방법이 지침에 규정되어야 한다.

• 한국안전학회지
• /
• 제33권5호
• /
• pp.120-126
• /
• 2018

The traffic accident types are largely classified into vehicle to vehicle accident, vehicle-to-person accident and single-vehicle. Especially, the single-vehicle accident types are severe when the vehicle crashed into road facilities such as bridge, piers, utility poles. The severity of single-vehicle accidents are ten times higher than that of all other accidents types. It is needed to consider to reduce accident severity. This study was conducted to develop crash worthy safety design facility to ensure the vehicle occupant safety. The simulation and the crash tests were conducted for assessment of the safety performance to check the criteria of CC2(Crash Cushion 2) level. THIV(Theoretical Head Impact Velocity) and PHD(Post-impact Head Deceleration) were used to assess occupant impact severity for crashes. The non-redirection collision test conditions for 900 kg and 1,300 kg-head on crash tests, 900 kg-1/4 offset crash tests, 1,300 kg-head on crash test with $15^{\circ}$angle were conducted. The simulation and experiment test result showed that THIV values were below 44 km/h criterion, PHD values were below the 20G. The development non-redirective crash cushion is expected to be used for the fixed object such as bridge piers for assuring occupant safety.

• 한국인터넷방송통신학회논문지
• /
• 제16권3호
• /
• pp.179-186
• /
• 2016

본 연구는 차량의 도로이탈을 방지하고, 충격량을 흡수하여 차량 탑승자 및 도로주변의 인도를 횡단하는 보행자를 보호하기 위한 차량용 방호울타리에 관한 연구로서 LS-DYNA를 이용해 탑승자 보호성능 평가시험을 시뮬레이션하였으며, 다양한 속도와 각도를 변경하여 반복 시뮬레이션을 하여 충돌조건에 따른 탑승자 보호성능을 고찰하였다. 시뮬레이션을 위한 변수의 설정은 국내차량 판매대수에 따른 평균차량의 중량을 구하고, 미국 NHTSA의 NASS를 분석하여 실제 사고가 발생하는 속도와 충돌각도구간을 검출하였다. 그 결과로 충돌속도와 충돌각도가 커질수록 THIV(탑승자 충격속도)와 PHD(탑승자 가속도) 값이 증가하는 것을 확인하였으며, 차량이 가드레일의 지주에 걸리는 현상이 발생할 때 탑승자보호성능이 크게 저하되는 것을 확인하였다.

• 한국자동차공학회논문집
• /
• 제16권2호
• /
• pp.49-57
• /
• 2008

The performance of crash cushion systems is certified through the full scale crash tests by the standard for installation and maintenance guidelines for roadside safety appurtenance. The impact severities of impacting vehicles in collision with crash cushion systems are rated by indices THIV and PHD. Crash test results are considered to study the performance of three crash cushion systems. In case of the frontal impact or the offset frontal impact, the results show that THIV values of three systems are very close to the threshold limit for the occupant protection. Also, the results show that PHD would be improper for the occupant protection performance index. In order to improve the occupant protection performance of crash cushions, ASI needs to be included in the impact severity index.

• 자동차안전학회지
• /
• 제6권2호
• /
• pp.55-60
• /
• 2014

To verify the performance of roadside safety facilities, strength and occupant protection test are performed by evaluation criteria. Strength test use a truck and occupant protection test use a sedan. Strength perfomance is analyzed pass rate by post lateral resistance of the safety barrier. Occupant protection performance is analyzed from THIV(Theoretical Head Impact Velocity) and PHD(Post-impact Head Deceleration) by crash cushion test.

• 한국자동차공학회논문집
• /
• 제22권4호
• /
• pp.10-19
• /
• 2014

Despite the movement of safe traffic by the Korean government to reduce deaths in traffic accidents, the casualties increase year by year. In particular, more and more accidents and casualties are reported from car collisions from the back of the vehicles parked for managing traffic accidents on the road, cleaning main roads and medial strips, repairing roads. In order to response to these accidents, the government should take protective measures for road users. In the last decade, seventy-one cases have been reported to occur during highway repair and maintenance. As a result, eight persons were killed and seventy-six were injured, showing the high death rate of 11.3 percent. Therefore, it seems urgent to take some actions against it. The United States and European countries legislate that vehicles of road repair and maintenance should be mandatorily equipped with shock absorber at the back. Korea, however, does not have such legislative measures, which are needed at this time to protect workers on the road. This study compares the performance of the traditional shock absorber for road maintenance vehicles with that of the rear safety guard using air bag, manufactured in accordance with related laws in Korea. Based on the results of the 60km/h rear collision test, this paper proposes improvements in related laws and regulations in an attempt to reduce casualties.