• 한국환경복원기술학회지
• /
• 제6권5호
• /
• pp.59-69
• /
• 2003

Most denuded mountain areas in Korea were completely stabilized by the successful work of the 1st and 2nd 10-year Forest Development Plans which targeted the reforestation of denuded forest lands. The objectives of this study are (1) to estimate the depth of organic horizon in the soil profile, (2) to investigate the change of vegetation structure, (3) to estimate the change of biomass in the erosion controlled and rehabilitated mountain areas with the passage of time. This study was carried out as the 5th times. The first study began in the year of 1985, the second study was in the year of 1988, the third study was in the year of 1992, 4th was in the year of 1998 and 5th was in the year of 2002. The first study started in the study sites which elapsed 9 years after erosion control works. The results of the study were as follows : The increase rate of soil thickness was estimated to $Y_{(cm)}=2.906log_{(yr)}-3.2476(r^2=0.917)$ during 26 years after erosion control works. The important value of pines decreased to 14.7% on upper layer. But, the important value of alders. which did not plant on erosion control work increased to 27.1%. The decrease of whole crown projection indicates that pines. and alders were heavily injured by pine leaf gall midge in the year of 1993, 1995 years and Agelastica coerulea Baly in the year of 1986, 1987 years at Yoju-gun. The young growth of pines and alders not appeared on the soil surface which elapsed 26 years after erosion control works. On the lower layer, oaks occupied over 50% in I.V, RD, RC, RF. In process of years, the increase of biomass estimated to be $Y_{(t/ha)}={0.7505X_{(yr)}}^{1.6335}\;(r^2=0.9712)$ for 26 years after erosion control works.

• 한국지형학회지
• /
• 제26권4호
• /
• pp.21-31
• /
• 2019

Timing of terrace formation is a key information for understanding the evolution of fluvial systems. In particular, dating strath terrace (i.e. timing of terrace abandonment) is more difficult than depositional terrace that is conventionally constrained by radiocarbon, OSL and other dating methods targeting samples within terrace deposit. Surface exposure dating utilizing cosmogenic ¹⁰Be provides more reliability because it can be applied directly to the surface of a fluvial terrace. Thus, this method has been increasingly used for alluvial deposits. As well as other geomorphic surfaces over the last decades. Some inherent conditions, however, such as post-depositional ¹⁰Be concentration (i.e. inheritance), surface erosion rate, and density change challenge the application of cosmogenic ¹⁰Be to depositional terrace surface against simple bedrock surface. Here we present the first application of ¹⁰Be depth profile dating to a thin-gravel covered strath terrace in Korea. Monte Carlo simulation (MCS) helped us in better constraining the timing of abandonment of the strath terrace, since which its surface stochastically denuded with time, causing unexpected change of ¹⁰Be production with depth. The age of the strath terrace estimated by MCS was 109 ka, ~4% older than the one (104 ka) calculated by simple depth profile dating, which yielded the best-fit surface erosion rate of 2.1 mm/ka. Our study demonstrates that the application of ¹⁰Be depth profile dating of strath terrace using MCS is more robust and reliable because it considers post-depositional change of initial conditions such as erosion rate.

• Archives of Pharmacal Research
• /
• 제18권3호
• /
• pp.183-188
• /
• 1995

Polymeric reinforcement and coatings of alginate beads were carried out to control the release rate of drug from alginate beads. A poorly water-soluble ibuprofen (IPF) was selected as a model drug. A commercially available $Eudragit^{\circledR}$ RS100 was also used as a polymer. Effects of polymeric contents, the presence of plasticizers and amount of drug loading on the release rate of drug were investigated. The release rate of drug from alginate beads in the simulated gastric fluid did not occur within 2 h but released immediately when dissolution media were switched to the simulated intestinal fluid. No significant difference of release rate from polymer-reinforced alginate bead without plasticizers was observed when compared to plain (simple) beads. However, the release rate of drug from polymer-reinforced alginate beads was further sustained and retarded when aluminium tristearate (AT) as a plasticizer was added to polymer. However, polyethylene glycol 400 (PEG400) did not change the release rate of drug from alginate beads although PEG400 was used to improve dispersion of polymer and sodium alginate, and plasticize $Eudragit^{\circledR}$ RS100 polymer. The presence of plasticizer was crucial to reinforce alginate gel matrices using a polymer. As the amount of drug loading increased, the release rate of drug increased as a result of decreasing effects of polymer contents in matrices. The significantly sustained release of drug from polymer-coated alginate beads occurred as the amount of polymer increased because the thickness of coated membrane increased so that cracks and pores of the outer surface of alginate beads could be reduced. The sustained and retarded action of polymer-reinforced and coated beads may result from the disturbance of swelling and erosion (disintegration) of alginate beads. From these findings, polymeric-reinforcement and coatings of alginate gel beads can provide an advanced delivery system by retarding the release rate of various drugs.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.760-763
• /
• 2006

In this paper, a small portion of coastline on the EAST SEA was studied using CORONA panoramic satellite photo and 1:5000 Korean National Topographic Map. The project site near Kangneung city was 3 Km shoreline on the Kangmoon Beach and the SongJeong Beach, which have suffered from severe erosion. The first and the most important step was to rectify a CORONA image over the project site. A rigid mathematical model and a heuristic polynomial transformation were used for the purpose. The rectified image was overlaid with 1:5000 Korean National Topographic Map produced by aerial mapping. Among numerous methods for shoreline erosion measurement, area-based approach was chosen and used for the computation for annual shoreline recession. The final result of the analysis was that the average recession in the period of 1963-1998 was 33.6m and the annual rate was 0.96m.

• 대한원격탐사학회지
• /
• 제29권5호
• /
• pp.477-486
• /
• 2013

장기간 해안선 변화 자료의 구축을 통해 해안선의 시 공간적인 변화 양상을 분석하고, 이에 근거하여 해안침식의 향후 경향을 파악하는 일은 연안관리에 매우 중요한 역할을 한다. 본 연구에서는 수치항공사진을 이용하여 방포항 인근 해안지역의 장기간(1985년 ~ 2009년) 해안선 변화 탐지를 위해 항공삼각측량, 지상기준점측량, 수치도화, 그리고 해안선 변화율을 산정하였다. 그 결과 방포해빈과 꽃지해빈의 해안선은 각각 0.2 m/yr와 최대 0.8 m/yr로 침식된 것으로 파악되었다. 또한 등고선 변화 통하여 꽃지 해빈의 북부지역에서 침식현상이 가장 뚜렷하게 나타났으며 표고 1 m 간격의 등고선은 최대 45 m 후퇴하였음을 알 수 있었다. 이러한 변화는 다양하고 복합적인 요인에 의해 발생할 수 있으며 주된 요인은 1990년대 말에 설치된 해변 옹벽이 해안침식을 일으키는 주요 원인으로서 추정되고 있다.

• 한국지반공학회지:지반
• /
• 제13권5호
• /
• pp.155-168
• /
• 1997

흙 세립자의 이탈 및 유동은 지반공학이나 지반환경공학적인 관점에서 매우 중요한 현상 중의 하나이다. 특히 지반환경공학적인 견지에서 보면 세림자가 입자유동을 하기 전에 오염물질을 흡착하기 때문에, 오염물질 정화의 방편으로 이용될 수 있다. 본 논문에서는 한국에 가장 편재해 있는 화강풍화토의 입자유동특성을 실내시험에 의해 파악하였다. 실험에 사용된 시료는 대표적인 잔류토라 할 수 있는 서을 신내동, 포이동 및 경북 안동의 시료 각각에 대하여 흐름에 대한 지반특성 치등을 측정하였다. 풍화잔적토에서의 세립분 유동특성에 가장 큰 영향을 미차는 인자는 세립자의 함량과 초기간극률 그리고 입도분포로 나타났고 입자가 이탈되기 시작하는 한계속도는 200번체 통과량에 비례 하여 감소하는 경향을 보였다. 이탈률의 변화율은 간극률에 비례하여 증가함을 보였으며 입도분 포가불량하고200번체 통과량이 적은 시료에서의 입자이탈량이 가장 크게 나타났다. 또한 실험결과를 토대로 단계별 입자유동현상을 표현하는 기본방정식을 모델링하고 유한차분법을 이용하여 해를구하므로써 흐름이 발생하는 지반구조물에서 입자유동현상이 미치는 영향을 파악할 수 있는 토대를 마련하였다.

• Carbon letters
• /
• 제4권3호
• /
• pp.133-139
• /
• 2003

Carbon/carbon composites are ideal candidates for a number of aerospace applications including structural materials for advanced vehicles, leading edges, structures of re-entry and hypersonic vehicles and propulsion systems. One serious defect for such application of the carbon/carbon composites is their poor oxidation resistance in high temperature oxidizing environments. SiC coating was employed to protect the composites from oxidation. It is mechanically and chemically stable under extreme thermal and oxidative environments, provides good adhesion to the substrate, and offers good thermal shock resistance. The SiC layer on the nozzle machined from the carbon/carbon composites was formed by pack-cementation method. Then, erosion characteristic of SiC coated carbon/carbon nozzle was examined by combustion test using a liquid rocket motor. The erosion rates were measured as function of combustion pressure, ratio of oxygen to fuel, combustion time, density of the composites and geometry of reinforced carbon fibre in the composites. The morphology change of the composites after combustion test was investigated using SEM and erosion mechanism also was discussed.

• 상하수도학회지
• /
• 제28권5호
• /
• pp.581-587
• /
• 2014

Sediment basin that is typical facility installed for development business to prevent soil erosion has low removal efficiency and therefore, it causes complaints from the residents and has a bad effect on ecosystem. Thus there is a limit to control soil erosion using the existing design methods of sediment basin, so the purposes of this study is providing suitable design factors for sediment basin with regarding soil characteristic of development areas and analysing sedimentation characteristic by inflow concentration changes. The results, for analyzing the sedimentation characteristic by soil concentrations within approximately 2,000 ~ 20,000 mg/L of initial SS concentration, indicated similar sedimentation trends for same soil in the supernatant regardless of initial concentrations. However, for different soil characteristic (percent finer), there are different results in sedimentation rate and concentrations of the supernatant. Thus it is recommended that sediment basin to prevent soil erosion during construction should be designed based on retention time derived from soil sedimentation experiments regardless of inlet concentration. In addition, installing the soil erosion prevention facility at the back to satisfy effluent water quality should be considered to minimize soil erosion effectively.

• 대한토목학회논문집
• /
• 제28권3D호
• /
• pp.423-429
• /
• 2008

본 연구의 목적은 기후변화와 토지이용에 의한 미래 토양침식을 추정하는 것이다. 기후모형인 CCCma (Canadian Centre for Climate Modelling and Analysis)에 의해 예측된 강우자료 중 2030년에서 2050년까지의 자료를 이용하여 토양침식 모의를 수행한 후 관측값과 비교하였다. 즉, 현재의 토양침식 관측값과 예측된 미래의 조건에 따른 토양침식 결과에 대한 상대비교를 통해 기후변화가 토양침식에 미치는 영향을 분석하였다. 사회-경제 변화에 의해 예상되는 토지이용 변화와 기온 및 의 증가에 따른 식물성장에 대하여 포괄적으로 고려하였다. A2 시나리오와 B2 시나리오에 의해 예측된 2030년에서 2050년 기간의 모의된 강우평균을 1966년에서 1998년 사이의 관측 강우평균과 비교한 결과 각각 17.7%와 24.5% 증가하는 것으로 나타났다. B2 시나리오에 의한 토양침식량이 A2 시나리오에 의한 값보다 크게 예측되는 것을 확인할 수 있었으며, 총 6개 시나리오(일부 농촌 지역의 도시화 2개 시나리오, 전 농촌 지역의 도시화 2개 시나리오, 식물성장을 가정한 시나리오 2개) 중 일부 농촌 지역이 순차적 도시화가 이루어지는 시나리오를 제외한 나머지의 경우 토양침식이 48%에서 90%까지 증가하는 것을 알 수 있었다. 온도에 의한 식물성장속도의 가속, 높은 증발산을, 그리고 거름효과가 미치는 영향 등을 가정한 시나리오가 토양침식결과는 이를 가정하지 않은 시나리오보다 약 25% 정도 작게 예측되는 것을 확인할 수 있었다. 연구결과 본 대상유역의 미래에는 강우량과 토양침식량이 증가할 것으로 사료되므로, 이에 대한 관심을 가져야 할 것이다.

• 접착 및 계면
• /
• 제7권2호
• /
• pp.19-25
• /
• 2006

미생물 합성 고분자인 poly(hydroxylalkanoate)s (PHAs)의 초기효소분해는 표면침식의 메커니즘으로 진행하므로 이들의 분해거동은 표면특성을 개질로서 조절할 수 있다. 본 연구에서는 효소분해속도를 조절하기 위하여 플라즈마 기법을 PHAs 표면특성의 개질에 적용하였다. $CF_3H$와 $O_2$ 플라즈마를 사용하여 재료 표면에 각각 소수성 및 친수성을 부여하였다. 효소분해 실험은 pH 7.4의 0.1 M potassium phosphate 완충용액에서 Alcaligenes facalis T1에서 정제된 poly(hydroxybutyrate) 분해효소를 첨가하여 행하였다. $CF_3H$ 플라즈마 처리된 시편의 경우 표면 층의 불소화에 따른 소수성의 증가와 분해 효소에 대한 비활성으로 초기분해 속도가 상당히 지연됨을 관찰하였으나 $O_2$ 플라즈마 처리에 의한 표면 친수성은 분해속도의 촉진 등에 큰 영향을 미치지 않았다.