• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.7 no.1
• /
• pp.33-37
• /
• 2011

The ectopic eruption is defined as abnormal eruption which gives to displacement of the teeth and abnormal root resorption of adjacent teeth. The prevalence of ectopic eruption is reported to vary 2~6%, most of them are in the maxilla. Etiologic factors include narrow maxilla, large maxillary teeth, inclined eruption path of the first molar, retruded position of the maxilla and hereditary factor. Irreversible ectopic eruption where the second primary molar is lost often causes mesial tipping and rotation of the permanent molar, unfavorable occlusion and space deficiency for the second premolar. Ectopically erupted teeth should be treated early to maintain normal development of the dentition, harmony of facial growth and occlusal support. The method of the treatment are classified as follows : appliances that is positioned at the contact point for unlocking and the distal movement, fixed appliance that is connected to more than one tooth, and occlusion guiding method after disking or extraction of the second deciduous molar. A case report of a patient with bilaterally ectopic eruption of maxilla and mandible first permanent molar was present. Also, the patient who had experienced the chronic myelogenous leukemia, show various dental developmental complications. The ectopic eruption was treated with a Halterman appliance that was a effective way of correcting of ectopic eruption of the permanent first molar.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.3
• /
• pp.468-478
• /
• 2009

This research was performed to provide basic data for the development of infection related dental hygiene studies by surveying the current condition of recognition among students in the department of dental hygiene toward hospital infection management while receiving the following results by using a personal self-administered survey method targeting 303 students in the department of dental hygiene from certain areas. 1. With the current condition of recognition on the sanitization and sterilization of instruments among students in the department of dental hygiene(study), the rate at which surgical instruments are to be sterilized with autoclaves was 79.9% which was relatively higher than other instruments while it was shown that prosthetic instruments for treatment was 56.4%, conservative instruments for treatment was 51.8%, and ultrasonic scaler tip was 51.1% while the way syringe tips(36.1%) and the dental anesthetic apparatus(27.9%) were revealed to require sanitization by alcohol. 2. The 'hand wash' area was the highest with 4.71 while the 'materials and environment management' area and 'equipment management' area appeared high respectively with 4.43 and 4.41. 3. With the current condition of recognition on equipment management, 'equipments used for contagious patients are separately washed after a one-time use and must be sterilized or separated-and-discarded' was the highest with 4.82 while 'sterilization equipments with humidity or water on it are considered contaminated and are not used' showed the lowest recognition level with 3.90. 4. Regarding the current condition of materials and environment management, 'contagious and general trash are separated and discarded' was the highest with 4.70 while 'the refrigerator for medicine storage is cleaned on a regular basis once a month' was revealed as the lowest with 4.11. 5. With the current condition of recognition on hand washing, 'one must wash their hands after coming in contact with contagious patients, was the highest with 4.90 while washing hands after taking off gloves' appeared as the lowest with 4.51 point. To conclude department of dental hygiene there is to infection management and necessary about organization disinfecting and pasteurization to strengthen an education in order raising a stamp helping practical ratio about the infection management which whole, is from presence at a sickbed and connection does and about the infection management which is substantial and educational program development leads feed with the fact that deepening studying which is continuous must become accomplished becomes.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.1
• /
• pp.17-25
• /
• 2003

Treatment with implants of single tooth missing cases is both functional and esthetic. Although the success rate of single-tooth implant treatments is increasing, sometimes it makes some problems. Problems with single-tooth implant treatments include soft tissue complications, abutment screw fracture, and most commonly, abutment screw loosening, and these involve the instability of the dental implant-superstructure interface. This study investigated and compared dental implant screw joint micromotion of various implant system with external connection or internal connection when tested under simulated clinical loading, Six groups (N=5) were assessed: (1) Branemark AurAdapt (Nobel Biocare, Goteborg, Sweden), (2) Branemark EsthetiCone (Nobel Biocare, Goteborg, Sweden), (3) Neoplant Conical (Neobiotec, Korea), (4) Neoplant UCLA (Neobiotec, Korea), (5) Neoplant 5.5mm Solid (Neobiotec, Korea), and (6) ITI SynOcta (Institute Straumann, Waldenburg, Switzerland). Six identical frameworks were fabricated. Abutment screws were tightened to 32-35 Ncm and occlusal screw were tightened to 15-20 Ncm with an electronic torque controller. A mechanical testing machine applied a compressive cyclic load of 20kg at 10Hz to a contact point on each implant crown. Strain gauge recorded the micromotion of the screw joint interface once a second. Data were selected at 1, 500, 5,000, 10,000, 20,000, 30,000, 40,000 and 50,000 cycle and 2-way ANOVA test was performed to assess the statistical significance. The results of this study were as follows; The micromotion of the implant-superstructure in the interface increased gradually through 50,000 cycles for all implant systems. In the case of the micromotion according to cycle increase, Neoplant Conical and Neoplant UCLA system exhibited significantly increasing micromotion at the implant-superstructure interface (p<0.05), but others not significant. In the case of the micromotion of the implant-superstructure interface at 50,000 cycle, the largest micromotion were recorded in the Branemark EsthetiCone, sequently followed by Neoplant Conical, Neoplant UCLA, Branemark AurAdapt, ITI SynOcta and Neplant Solid. Internal connection system showed smaller micromotion than external connection system. Specially, Neoplant Solid with internal connection system exhibited significantly smaller micromotion than other implant systems except ITI SynOcta with same internal connection system (p<0.05). In the case of external connection, Branemark EsthetiCone and Neoplant Conical system with abutment showed significantly larger micromotion than Branemark AurAdapt without abutment (p<0.05).

• Journal of Environmental Health Sciences
• /
• v.42 no.4
• /
• pp.266-273
• /
• 2016

Objectives: This study evaluated the virucidal efficacy against avian influenza virus (AIV) of a disinfectant spray containing 0.25% grapefruit seed extract, 0.2% citric acid, 0.0625% malic acid and 0.0125% benzalkonium chloride. Methods: The disinfectant spray was diluted several times with hard water (HW) and organic matter (OM). Two point five mL of each diluent was added into each test tube, and 2.5 mL of AIV suspension was inserted into each test tube. After 30 minutes of virus-disinfectant contact reaction at $4^{\circ}C$, 2.5 mL of 10% inactivated fetal bovine serum was added into each test tube to neutralize the sanitizer efficacy. The neutralized solutions were serial 10-fold dilutions with phosphate buffer solution, and 0.2 mL of the diluents was injected into the allantoic cavity of five ten-day-old-chickens per dilution time. After incubation of the embryos for five days, the viability of the AIV was examined by hemagglutination titer. The valid dilution of the disinfectant spray was estimated according to the dilution time that the virus titer was inactivated more than $10^4$ 50% egg-infective dose (EID50)/mL compared with pathogen control. Results: In HW and OM conditions, the valid dilutions of the disinfectant spray against AIV were seven- and three-fold dilutions, respectively. The AIV titer of the pathogen control was more than 6.1 log10EID50/mL, and there was no embryonic toxicity. Conclusion: The present study showed that this disinfectant spray has effective virucidal activity against AIV.

• Land and Housing Review
• /
• v.12 no.4
• /
• pp.81-92
• /
• 2021

This study investigates whether urban expansion can act as a cause of the decline of the original city center through the Space Syntax methodology. The urban spatial structure analysis was conducted targeting the downtown area of Jeju-eupseong. The time points for longitudinal analysis were set at five points between 1914 and 2021 including the Japanese colonial period when the cadastral map was drawn up in Jeju City, and the urban spatial structure was analyzed and compared for each time point. ASA (Angular Segment Analysis) was used as a technique for urban spatial structure analysis. This study shows that urban expansion is a cause of the decline of the original downtown. The original city center has moved away from the center as the urban structural change due to the urban expansion. The urban structure of the eastern part of Jeju City has undergone a major transformation between 1914 and 2021. As the old Jeju area where the original city center was located is geographically in contact with the sea, urban sprawl has been made toward Halla Mountain and further to the south of Jeju. Accordingly, the city center has transformed from a monocentric to a polycentric structure. Due to the dynamics of the urban sprawl, the old downtown of Jeju became one of the peripheral neighbourhoods in the Greater Metropolitan of Jeju.

• The Korean Journal of Archival Studies
• /
• no.39
• /
• pp.45-72
• /
• 2014

In the recent years, Gov.2.0, which strengthens not only a claim for freedom of information but also sharing public information, became a new paradigm of government operations. In line with the paradigm the Korean government promotes the Gov.3.0 policy. This study exams the freedom of information system, which expends its roles and responsibilities for enhancing the usage of public information in the Gov.3.0 era. Furthermore, it analyzes the system's usability from the perspective of users. The freedom of information system is the fundamental portal for all the public information's disclosure and usage. Without providing the solution for problems of the system, the Korean government's Gov3.0 policy cannot succeed. Also, Park Geun-hye Government's Gov.3.0 initiatives which consists of tasks, such as reinforcing freedom of information, immediate releasing original documents, and expending public access to information, should be done through the freedom of information system. The importance of the system is increasingly heavy. It is not only the simple online contact point for public information, but also a public sphere for sharing public raw data and for implementing the Gov.3.0 vision. However, the current system still does not slove it problems. This study analyzes the system's problems in terms of usability and sustainability. As a result, it provides three alternative strategies for the freedom of information system, including 'personnel and financial support expansion', 'strengthening user-friendly operating' and 'establishing long-term strategies for system improvement.

• Journal of the Korean Chemical Society
• /
• v.47 no.2
• /
• pp.147-154
• /
• 2003

In this study, the fluorinated carbon blacks(CB) were used to reduce the negative temperature coefficient (NTC) phenomenon of the CB-filled high density polyethylene(HDPE) compounds in the fluorination pressure of 0.1-0.4 MPa. The changes in surface properties of the CB were investigated by using FT-IR, XPS and contact angle measurements. From the FT-IR results, the fluorinated CB showed the C-F absorption peak at 1400-1000 cm$^{-1}$ and the peak intensity was increased with increasing the fluorination pressure. Also, the analysis of XPS spectra of the fluorinated CB indicated that fluorine content was increased with increasing the fluorination pressure. Meanwhile, the surface free energy of the fluorinated CB was decreased with increasing the fluorination pressure. Consequently, the increase of fluorine contents on CB made a disappearance of NTC behaviors of CB/HDPE compounds, which was probably due to the reduction of CB reaggregation after melting point of the HDPE, resulting from decreasing the surface free energy of CB particles.

• Journal of Korean Philosophical Society
• /
• no.114
• /
• pp.305-335
• /
• 2016

In the eighteenth century, the scottish philosophers Francis Hutcheson, David Hume and Adam Smith share the idea that morality comes from moral sense, which is a feeling of approval or disapproval of agent's motive and action. However, they have the different views in explaining the mechanism that generates the moral sentiments. Hutcheson takes a moral sense to be a unique mental faculty that is innate to all humans, and regards it as being guaranteed by supernatural apparatus like divine Providence. Hume and Smith reject Hutcheson's concept of internal moral sense and take a stage further Hutcheson's projects of internalisation by naturalizing morality in terms of the principle of sympathy. It is widely held that Hume's moral sentimentalism is essentially similar to Adam Smith's. Though there are important points of contact between Smith's account of sympathy and Hume's, the differences are considerable. The chief of them lies in the fact that Hume grounds our approval of virtue on our recognition of its utility and convention, and Smith does not. Smith grounds our approval of virtue on the impartial spectator's judgment, i.e., conscience. Hence for Smith, the impartial spectator is the one that bridges the gap between particularity and universality and works the vehicle of practical reason. Given this, in this paper, first, I will clarify the difference between Hume's and Adam Smith's understandings of sympathy. Second, I will elucidate how they explain the process to produce the moral sentiments based on their understandings of sympathy. I shall finally explicate in what way Hume's and Smith's theories on sympathy work as moral normativity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.200-207
• /
• 2016

The automotive seat is an important component that moves in sync with the driver and is actively being developed with various new functions. The aim of this work is to develop a lightweight seat cushion extension module using a lightweight material. To this end, a structural strength analysis, vertical strength test, and durability test were conducted. In the structural analysis, the maximum value of deformation under vertical load was 4.98 mm at the front of the upper panel. The maximum stress was approximately 105 MPa, which occurred at the point of contact between the upper and lower panels of the module. The vertical strength test showed a maximum vertical deformation of 5.31 mm under a vertical load, which differed from the analysis results by approximately 6.45%. The structural safety of the product was verified by the fact that it showed no harmful deformation or damage during operation after the vertical strength test and a durability test for 20,000 cycles. Furthermore, the use of engineering plastics made it possible to reduce the weight by approximately 30% compared to existing products. The lack of damage after tests verified the passenger safety, strength, and rigidity of the product. The results are expected to be applied for improving environmental and fuel efficiency regulations and preventing accidents due to driver fatigue. The applications of this module could be expanded various types of vehicles, as well as other industries in which eco-friendly and lightweight materials are used.

• Journal of Astronomy and Space Sciences
• /
• v.14 no.1
• /
• pp.44-58
• /
• 1997

The BVR CCD photometric observations of W UMa-type eclipsing binary SS Ari were made on ten nights from November 1996 to December 1996. Eight new times of minimum lights were derived. The analysis of times of minima of SS Ari confirms the suggestions of other previous investigators that the orbital period of SS Ari have been suffering from a sinusoidal varition. The amplitude and period for the cyclic period changes were calculated as about $58^{y}$ and $0.^{d}053$, respectively. The period variation has been discussed in terms of two potential mechanisms: 1) the light-time effect due to a hypothetical third body and 2) deformations in the convective envelope of a magnetically active component. In the earlier case, the third body has a mass of $1.3M_{\odot}$, if exist, in the form of a white dwarf or a binary system. It seems that the system velocities from the spectroscopic observations supports this interpretation. Meanwhile in the latter case, the primary component is mainly responsible for the magnetic activity of this system with a theoretical amplitude of $\pm0.^{m}08$. However, we cannot make a conclusion which is reasonable explanation at this point, due to lack of observational data. Moreover, the period variation of SS Ari shows duplication about $14^y$, cyclic period with an amplitude of about $0.^d001$ to the above periodic change. We also cannot make an acceptable conclusion for it at this time.