• Journal of Korean Society on Water Environment
• /
• v.24 no.6
• /
• pp.793-800
• /
• 2008

Recently domestic drinking water industry has recognized membrane-based technology as a promising alternative for water treatment. To ensure successful application of membrane processes, the integrity of membrane systems should be maintained. According to US EPA guidance, the pressure decay test based on the bubble point theory is recommended to detect any membrane defection of which size is close to the smallest diameter of Cryptosporidium oocysts, $3{\mu}m$. Proper implementation of the pressure decay test is greatly affected by initial test pressure, and the interpretation of the test results is associated with upper control limit. This study is conducted to investigate various factors affecting determination of initial test prtessure and upper control limit, including membrane-based parameters such as pore shape correction factor, surface tension and contact angle, and system-based parameters, such as volumetric concentration factor and total volume of system. In this paper, three different hollow fibers were used to perform the pressure decay test. With identical initial test pressure applied, their pressure decay tendency were different from each other. This finding can be explained by the micro-structure disparity of those membranes which is verified by FESEM images of those membranes. More specifically, FESEM images revealed that three hollow fibers have asymmetry, deep finger, shallow finger pore shape, respectively. In addition, sensitivity analysis was conducted on five parameters mentioned above to elucidate their relation to determination of initial test pressure and upper control limit. In case of initial pressure calculation, the pore shape correction factor has the highest value of sensitivity. For upper control limit determination, system factors have greater impact compared to membrane-based parameters.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.4
• /
• pp.75-82
• /
• 2015

The elderly rate in South Korea in 2015 is over 13.1%. Especially, the elderly rate in rural area is high. Senior community project in rural that is being promoted by the government. This study's purpose is to provide the reserch group-home for the elderly in Japan rural area. And this paper provided planning of group-home for the elderly in Korea rural area. For this study, respective 5senior housing of Korea and Japan were chosen as respresenting two nations, and every manager was interviewed on housing pattern. This study suggests the planning material as following. First, the effectiveness of the group-home are big. Especially, the elderly was far healthier. Design point is public space(living room, small living room, etc). Maybe, healthy group-home concept is that would be design by Korean traditional housing. Also important public space design is that would be inner courtyard-house, wood floor, Deachong, etc. Two group-homes will construct elderly welfare facilities in between. Otherwise that is need layout of a big public space. In the case of vacant house can used by considering of scale, structure, site condition. Closed school can used through so easy remodeling too. More often than not complex type(hospital, community heath center) was appeared in Japan rural area. In the case of Korea, recommend complex type in community health center and public building. In this case, considering communication, access, contact, group-home keeps on ground floor. In this paper, we hope to take a lesson from group-home planning source for the elderly in Korea rural area.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.1
• /
• pp.1-11
• /
• 2009

Although the exterior wood such as column may frequently contact with liquid water, little work has been found to measure liquid water absorption in wood. To investigate the moisture diffusivity of wood in the longitudinal direction including bound water and free water movement, liquid water absorption test was conducted at the room temperature. The order of magnitude for absorption coefficient and diffusivity was Japanese elm, horn beam, hemlock, spruce, radiata pine, and painted maple. The Boltzmann transformation method was used to determine the diffusivity from measured moisture content distributions in the absorption test. The shape of the curve representing the dependence of diffusivity with moisture content was similar in test samples. The diffusivity decreased with increasing moisture content until around the fiber saturation point and then increased at the nonhygroscopic region, which ranged from $10^{-10}$ to $10^{-7}m^2/s$.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.12
• /
• pp.31-40
• /
• 2018

We designed and implemented the attachable smart adapter for the general management of each company's agricultural machine regardless of whether it is equipped with a CAN (Controller Area Network) module. The smart adapter consists of a main board (Raspberry Pi3B), which operates agricultural machine's management software in Linux environment, and a self-developed interface board for power adjustment and status sensing. For the status monitoring, a sensing interface using a serial input was defined between the smart adapter and the sensors of the agricultural machine, and the state diagram of the agricultural machine was defined for diagnosis. We made a panel to simulate the sensors of the agricultural machine using the switch's on/off contact point, and confirmed the status monitoring and diagnostic functions by inputting each state of the farm machinery from the simulator panel.

• Journal of Intelligence and Information Systems
• /
• v.10 no.3
• /
• pp.133-146
• /
• 2004

By the development of the network technology, the types and amount of information that users keep in contact with have been dramatically increased. As a result, users are consuming a lot of time and energy to find needed information. On this, this article presents a new methodology that can efficiently manage their information within small cost by using content-based recommendation method and keyword affinity method. By using keyword affinity method, this methodology solves the content-based recommendation method's weak point that the performance is not good within the environment that the preferences of users are rapidly changing and new contents are created continuously and the accuracy level is low until the information of preferences are sufficiently gathered. This article carried out research on the personal e-mail environment where new information is frequently created and disappeared. Also this article assists folder recommendation for the efficient management of e-mail and verified the methodology mentioned above by an experiment to compare the performance of existing folder recommendation methods with the performance of this new method.

• Korean Journal of Materials Research
• /
• v.24 no.2
• /
• pp.73-80
• /
• 2014

Ink-jet printing technology has been widely attractive due to its facility for direct and fine printing on various substrates. Recent studies have focused on expanding the application of ink-jet printing technology from general consumer use and design companies to the prototype production of precision parts and parts manufacturing. The use of ink-jet printing technology in decorated tableware, tiles, and other ceramic products also has many advantages. The printing process is fast and can be adaptable to various kinds of objects because there is no direct contact point between the printer and the substrates to be printed. For application to ceramic product decoration, inks containing highly dispersed inorganic nano-pigments are required. Here we report the synthesis and characterization of blue $CoAl_2O_4$ nanopigment for ink-jet printing. Blue ceramic ink based on the obtained $CoAl_2O_4$ pigment was prepared by dissolving $CoAl_2O_4$ pigment in a mixed solution of ethylene glycol and ethanol with volume ratios of 7:3 and 8:2, respectively, to obtain the appropriate viscosity for ink-jet printing. The ink solution contained 15 wt% of $CoAl_2O_4$ pigment and Cetyltrimethyl ammonium bromide(CTAB) and Sodium dodecyl sulfate(SDS) as dispersive agents. The prepared blue ceramic ink was stably jetted and formed a sphere-shaped droplet from an ink-jet printer.

• Journal of dental hygiene science
• /
• v.14 no.2
• /
• pp.94-100
• /
• 2014

The purpose of this study was to evaluate the accuracy of digitized elastomeric impression materials of crown abutment, using non-contact white light scanner and virtual three-dimensional superimpositional analysis. The stone models and impressions were digitized white light scanner to create three-dimensional surface models. Stone models were used as CAD reference model (CRM). The resulting point clouds (ASC file) from digitization of impressions using converting software. Discrepancies between the points in the point clouds and CRM were measured by superimpositional software. Mean and standard deviation of values of discrepancies were analyzed by one-way ANOVA and multiple comparison (${\alpha}=0.05$). The mean discrepancy between the impressions for the extra-light body (XLB), light body (LB), and heavy body (HB) group were $5.10{\pm}1.45{\mu}m$, $6.30{\pm}1.87{\mu}m$, $9.80{\pm}1.52{\mu}m$, respectively. The different impression materials affected the digitization of impressions significantly (p<0.05). As a result, digitization of elastomeric impression materials on dental scanner was influenced by material sort.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.2
• /
• pp.55-62
• /
• 2000

The wetting balance test was performed in an attempt to estimate the wetting properties of the UBM-coated Si-wafer on one side to the Sn-Pb solder. The wetting curves of the one and both side-coated UBM layers had the similar shape and the parameters characterizing the curve shape showed the similar transition tendency to the temperature. The wetting property estimation was possible with the new wettability indices from the wetting curves of one side-coated specimen; $F_{min}$, $F_{s}t_{s}$ and $t_s$. For UBM of Si-chip, Au/Cu/Cr UBM was better than Au/Ni/Ti in the point of wetting time. The contact angle of the one side coated Si-plate to the Sn-Pb solder could be calculated from the force balance equation by measuring the static state force and the tilt angle.

• Journal of Korean Society of Archives and Records Management
• /
• v.20 no.4
• /
• pp.229-236
• /
• 2020

In light of SARS-CoV-2's significant impact, human society has experienced rapid changes in lifestyle that it has not yet experienced before. One way this virus has influenced people's lives is the emergence of the zero-contact society, an initiative for preventing the spread of infectious diseases. As can be seen, the social impact of COVID-19 is widespread. Various issues, such as those about government policy, personal information protection, and health care, are affecting society as a whole. At the same time, factual information is difficult to track and record because of the rapid and transient nature of related events and issues. As such, a method of effectively describing COVID-19 and real-time information is necessary. The "COVID-19: Our Memory" project is an attempt to record the sociocultural impact of the coronavirus infection. This project collects major events and issues classified into several subjects, records those events from a neutral point of view, and develops a digital archive so that all records are accessible. All the data collected and built through the project, the application, including the source code and visualization, are all published to bring about new opportunities for collaboration.

• Journal of the Korea Convergence Society
• /
• v.12 no.3
• /
• pp.115-124
• /
• 2021

The outbreak of covid-19 has brought the characteristics and advantages of non-contact services to increased prominence, and the development of smart hotels"has accelerated. This study aims to identify, categorize and define the smart service experience at different touch points of the customer experience. The concept and characteristics of the smart hotel were examined based on existing research and literature. An analytical framework was designed using smart experience factors and customer touch points of smart hotels. Selected Chinese smart hotels were then examined under this framework. The case analysis results show that the customer experience design of smart hotels has developed to different degrees, in terms of interactivity, personalization, accessibility, information and privacy security. Based on the above findings, this article suggests that the design of smart hotels should use integrated data to further enhance personalized service experience.