• Journal of the Korea Institute of Building Construction
• /
• v.21 no.2
• /
• pp.129-139
• /
• 2021

Recent rise in the supply rate of new public apartment houses leads to an increasement in disputes regarding the construction quality of the apartments between the residents and the construction companies. According to the dispute cases filed for claiming the collective defect repair fees, inter-layer concrete joints turned out to be the most frequently disputed item. For this reason, this study selects the inter-layer concrete joints to further analyze the primary causes and details of each dispute case. From the results of this study, three primary causes of the disputes are found, which are 1) the absence of standard specifications for construction quality control and management after construction; 2) the absence of established standards for repair when construction defects are found; and 3) the fact that the court grants generous compensation for disputes concerning the apartment houses. In order to prevent construction defects in inter-layer concrete joints, this study provides three suggestions including 1) the current standard specifications for inter-layer concrete joints should be further specified by the Ministry of Land, Infrastructure and Transport; 2) a construction defect should be judged according to the compliance to the standard specifications; and 3) a clear and institutional protocol needs to be established for defect repair in cases that new public apartment houses have been judged to have defects.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.3
• /
• pp.74-82
• /
• 2014

The proportion of apartment housing has been increased to solve the housing problems resulted from rapid growth in urban population and urban economy. With the increase in apartment's proportions and the concern about quality of housing, the contractors have made efforts to satisfy the customers in improving the quality of housing. Despite these efforts, the conflicts between the contractor and the customers are getting serious. Also the disputes and the litigation of defect are increasing because of the contractor's negative treatment and inadequate countermeasure. In this study the defect lawsuits which bring actions against the contractors are collected and analyzed. And then the strategic countermeasures are proposed according to the classifying the type of defect and size. The suggested countermeasure model before the defects are resulted is expected to contribute in developing the contractors strategies to reduce the conflicts against customers.

• Journal of Bio-Environment Control
• /
• v.15 no.1
• /
• pp.53-68
• /
• 2006

This experiment was conducted to investigate the effects of diurnal alternation of nutrient solution salinity on growth and fruit quality of tomatoes (Lycoperisicon esculentum cv. 'House momotaro') hydroponically grown in root intercept bag-NFT (RIB-NFT) system. Plant height was the lowest in the high concentration during daytime (6/1 $dS\;m^{-1}$, day/night). Yield was very high in the concentration of 1/1 $dS\;m^{-1}$, it decreased with increasing the concentration of nutrient Yield was higher at low concentration (4/1 $dS\;m^{-1}$) at nighttime compared to the same concentration (4/4 $dS m^{-1}$) at daytime and nighttime, and the reverse (1/4 $dS\;m^{-1}$) was similar to the control (perlite culture). Yield was greatly reduced by higher concentration at daytime than nighttime, and the decrease was alleviated by lower concentration at nighttime. With increasing the concentration of nutrient solution during daytime, sugar content of tomato fruit was increased, but yield was decreased. In the other experiment, tomato plants were hydropoically cultured in NFT system diurnally alternated between Aichi's solution and $Ca(NO_3)_2$ solution. $Ca(NO_3)_2$ solution was supplied for 4 hours from 10:00 to 14:00 at daytime and from 22:00 to 2:00 at nighttime, respectively, and Aichi's solution was supplied for the time except the 4 hours. Ca content of leaves and sugar content of fruit were increased by supplying $Ca(NO_3)_2$ solution at daytime compared to nighttime, but plant growth was greatly suppressed by supplying $Ca(NO_3)_2$ solution with the concentration of 4 $dS\;m^{-1}(4/4^{Ca}\;dS\;m^{-1})$ at nighttime.

• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.580-584
• /
• 2010

The effect of planting densities on the growth of $Sedum$ $samentosum$ (4 collections) was investigated using nutrient film technique (NFT) with Yamazaki' lettuce nutrient solution (1982) from September 5th to October 24th in non-heating plastic film house. At 40 days, the plant height of 4 collections showed the range of 15.0-18.9 cm, and mean plant height was high the order of $10{\times}10$, $2.5{\times}2.5$, and $5{\times}5cm$. The growth of 'Pohang' and 'Wando' collections was better compared to that of 'Gunsan' and 'Wanju' collections. Number of node, stem diameter, and fresh and dry weight per plant were decreased in higher planting density. Despite the lower fresh weight per plant obtained, the fresh yield per $m^2$ was significantly increased in higher planting density. The mean fresh yield was $14.9kg{\cdot}m^{-2}$ in $2.5{\times}2.5cm$, and 'Pohang' collection showed the highest fresh yield ($17.6kg{\cdot}m^{-2}$). The first optimized harvesting time base on plant height was 30-40 days after NFT culture during autumn season. In eating quality, compression force of stem and bitterness of shoot were decreased in higher planting density. However, the heavy labor demanding high density cutting needs to be improved for hydroponic culture of $S.$ $samentosum$.

• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.699-702
• /
• 2010

Anthracnose is a major limiting factor of the watermelon production in Korea. A mid-late maturing watermelon line, 'Hanbit' with resistance to anthracnose (Colletotrichum orbiculare) race 1 and 3, was developed by the cross between anthracnose resistant cultivar 'AU-Producer' and high quality inbred line '920533' at the National Institute of Horticultural and Herbal Science, Rural Development Administration (RDA). 'Hanbit' produces 5.4 to 9.5 kg of red flesh fruits with clear stripes on skin. Average soluble solid contents are ranged from 10.4 to 11.2$^{\circ}$Bx. The yield and quality of 'Hanbit' was comparable to or better than those harvested from the popular commercial cultivars. 'Hanbit' can be cultivated in open fields and under the protected green house condition. In addition to the commercial production, it can be used as a resistant material in $F_1$ hybrid breeding program.

• Land and Housing Review
• /
• v.14 no.4
• /
• pp.111-120
• /
• 2023

Indoor air quality has become increasingly important with the increase in time spent in residential environments, impact of external fine dust, yellow dust, and the post-COVID 19 pandemic. Residential mechanical ventilation plays a key role in addressing indoor air quality. The legal standard for residential air changes per hour in Korea is 0.5 ACH. However, there are no standards for the location of supply and return vents. This study atempts to analyze the impact of ventilation performance based on the location of supply and return vents. An experiment was conducted using the CO₂ tracer gas concentration decay method in a mock-up house set inside a large chamber to minimize external influences. The experimental results indicated that the commonly used combination of 2 supply and 2 return vents in living room spaces had a lower mean age of air than the combination of 1 supply and 2 return vents. Using multiple supply and return vents had lower mean age of air than using just 1 supply and 1 return vent.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.452-458
• /
• 2012

Rare earth elements fertilizer and Ca were sprayed on eight-year-old 'Fuji'/M.9 apple trees during two consecutive seasons, and fruit quality was quantified at harvest and 5-month long storing in a commercial cooling house at $4^{\circ}C$ and 80~85% RH. In the first season, single-sprayed of rare earth elements fertilizer showed appreciable accumulations of its elements (La, Pr, Gd, and Nd) in the fruit. In the following season, application of higher doses accumulated higher amount, indicating that the accumulation of rare earth elements was dose-dependent. However, rare earth elements did not affect the accumulations of Ca, Mg, and K in 'Fuji' apple fruit showed that there was no interaction between rare earth elements and these macronutrients. Double-spray of 0.2% rare earth elements increased fruit redness at harvest and had exhibited better color. Although at harvest it did not show significant effects on fruit weight, pulp firmness and titratable acidity (TA), but had pronounced effects on inhibiting fruit softness and retarded decrease of TA during storing. Furthermore, it reduced respiration rate and inhibited ethylene production during storing indicated that rare earth elements may be an alternative for prolonging the shelf life of 'Fuji'/M.9 apple fruit.

• Smart Media Journal
• /
• v.9 no.3
• /
• pp.107-115
• /
• 2020

Recently, BIM has become mandatory in the construction field, research on various use cases is increasing. In particular, when virtual reality technology, one of the core technologies of the 4th industrial revolution, and BIM are combined, it can be used in various fields such as preliminary design review and construction simulation. Until now, however, virtual reality grafting technology is only used as a simple prototype or as a model house. Also, it is difficult to activate virtual construction because it is expensive to produce high-quality virtual reality contents. Therefore, in this paper, in order to increase the utilization and quality of the virtual construction field, a study was conducted to shorten the material mapping time, which takes a lot of time when producing virtual reality contents using BIM. To this end, object properties were assigned to enable material mapping in the BIM model, and materials most used in the construction field were configured, and automated material function development and final tests were conducted that automatically map properties and materials. For the test, 10 models were used and the test was repeated three times, and the productivity improvement of about 50.16% was finally achieved. In the future, we plan to conduct research on physical data weight reduction based on the advanced material mapping automation function and the large-capacity BIM model.

• Asian Journal of Turfgrass Science
• /
• v.23 no.2
• /
• pp.241-252
• /
• 2009

This study was carried out to check the possibility of substituting bottom ash from the Seosan power plant for sand as growing media for creeping bentgrass (Agrostis stolonifera L.) under saline irrigation condition. Characteristics of growing media were evaluated by using column and leaching method. Creeping bentgrass cv. Pen-A1 was grown in pots with dredged up sand (DS) and bottom ash (BA) media those were amended using 1%, 2%, and 3 % OM rates in a green house. The plants were irrigated with 1.5 $dSm^{-1}$ saline water. Results showed that visual quality, plant height and shoot dry weight from DS treatment were higher than those of BA treatment. Even though BA contained more salts, repeated leaching could decrease ECe efficiently. In case of no OM amendment, the visual quality, plant height and shoot dry weight were similar between in BA and DS. Amendment of 2% OM increased the height of creeping bentgrass in DS, while decreased the plant growth in BA.

• Journal of Energy Engineering
• /
• v.16 no.2
• /
• pp.83-92
• /
• 2007

In view of stringent environment regulations to control the emission of green house gases and also depleting fossil fuel reserves, it is high quality desirable to develop alternative technologies to produce high quality fuels. To this end Biomass to Liquid (BTL) technology has received much attention in recent years. BTL process generally consists of gasification of biomass to produce bio-syngas, cleaning and control of $H_{2}/CO$ mole ratio of bio-syngas and Fischer-Tropsch synthesis & upgrading systems. Choren, Germany has first developed the commercial BTL process using unique gasification system i.e., Carbo-V. A new technology to remove tars and BTX has been developed by ECN in Netherlands employing a gasification system combined with OLGA technology. Several other countries including USA and Japan are showing great interest in BTL technology. Thus in view of our national energy security and also the environmental regulations, it is essential to develop alternative technologies like BTL in order to meet the increasing demand of energy though our insufficient biomass resources. In this paper we present an overview and development status of BTL-diesel technology.