• 대한지하수환경학회지
• /
• 제2권1호
• /
• pp.22-29
• /
• 1995

유동 세균 입자는 지체계수를 감소시키므로써 지하수에서 소수성 오염물의 이동을 촉진시킨다. 그 크기와 표면의 적당한 물리화학적 조건으로 인하여 세균은 효율적인 오염물의 운반자가 될 수 있다. 이러한 운반자가 있을 때, 그 계는 액상, 입상, 그리고 고상의 3 상으로 해석되어야한다. 오염물은 각 상에 모두, 혹은 그 중의 일부에 존재할 수 도 있다. 본 연구에서는 세균이 있는 경우, 생화학적으로 분해 가능한 유기성 오염물의 다공매질에서의 거동을 물질수지에 기초하여 수학적 모델로 묘사한다. 세균의 액상과 고상사이의 물질 전이 및 오염물의 액상과 입상사이의 물질 전이는 동역학적 관계식으로 나타냈다. 모델 결과를 일반화하기 위하여 무차원화를 수행했고, 그 해를 구하여 세균에 의한 오염물의 가속이송 효과를 알 수 있었다. 모델 결과는 문헌상의 실험결과와 비교되었다. 모델 결과로부터 오염물은 그 계의 Damkohler I 수가 10 이상일 경우 국지 평형 가정을 할 수 있었으며, 세균의 성장율과 주입 농도 등이 오염물의 청소에 아주 중요한 요소임을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제30권4호
• /
• pp.402-408
• /
• 2006

Dissimilar friction welding were produced using 15(mm) diameter solid bar in chrome molybedenum steel(KS SCM440) to carbon steel(KS S45C) to investigate their mechanical properties. The main friction welding parameters were selected to endure good quality welds on the basis of visual examination, tensile tests, Vickers hardness surveys of the bond of area and H.A.Z and microstructure investigations. The specimens were tested as-welded and post-weld heat treated(PWHT). The tensile strength of the friction welded steel bars was increased up to 100% of the S45C base metal under the condition of all heating time. Optimal welding conditions were n=2,000(rpm), $P_1=60(MPa),\;P_2=100(MPa),\;t_1=4(s),\;t_2=5(s)$ when the total upset length is 5.4 and 5.7(mm), respectively. The peak of hardness distribution of the friction welded joints can be eliminated by PWHT. Two different kinds of materials are strongly mixed to show a well-combined structure of macro-particles without any molten material and particle growth or any defects.

• 한국해양공학회지
• /
• 제26권1호
• /
• pp.64-69
• /
• 2012

Dissimilar friction welds were produced using 15-mm diameter solid bars of chrome molybdenum steel (KS SCM440) and carbon steel (KS SM20C) to investigate their mechanical properties. The main friction welding parameters were selected to ensure good quality welds on the basis of visual examination, tensile tests, Vickers hardness surveys of the bond area and HAZ, and macro-structure investigations. The specimens were tested as-welded and post-weld heat treated (PWHT). The tensile strength of the friction welded steel bars was increased to 100% of the SM20C base metal under the condition of a heating time of more than four seconds. Optimal welding conditions were n = 2,000 (rpm), HP = 60 (MPa), UP = 100 (MPa), HT = 5 (s),and UT = 5 (s), when the total upset length was 7.8 (mm). The hardness distribution peak of the friction welded joints could be eliminated using PWHT. The two different kinds of materials were strongly mixed to show a well-combined structure of macro-particles, with no molten material, particle growth, or defects.

• Nuclear Engineering and Technology
• /
• 제48권4호
• /
• pp.915-924
• /
• 2016

After a severe accident to the nuclear reactor, the in-vessel retention strategy is a key way to prevent the leakage of radioactive material. Nanofluid is a steady suspension used to improve heat-transfer characteristics of working fluids, formed by adding solid particles with diameters below 100nm to the base fluids, and its thermal physical properties and heat-transfer characteristics are much different from the conventional working fluids. Thus, nanofluids with appropriate nanoparticle type and volume concentration can enhance the heat-transfer process. In this study, the moving particle semi-implicit method-meshless advection using flow-directional local grid method is used to simulate the bubble growth, departure, and sliding on the downward-facing heating surface in pure water and nanofluid (1.0 vol.% $Al_2O_3/H_2O$) flow boiling processes; additionally, the bubble critical departure angle and sliding characteristics and their influence are also investigated. The results indicate that the bubble in nanofluid departs from the heating surface more easily and the critical departure inclined angle of nanofluid is greater than that of pure water. In addition, the influence of nanofluid on bubble sliding is not significant compared with pure water.

• 한국분말재료학회지
• /
• 제23권1호
• /
• pp.49-53
• /
• 2016

The present study demonstrates the effect of freezing conditions on the pore structure of porous Cu-10 wt.% Sn prepared by freeze drying of $CuO-SnO_2$/camphene slurry. Mixtures of CuO and $SnO_2$ powders are prepared by ball milling for 10 h. Camphene slurries with 10 vol.% of $CuO-SnO_2$ are unidirectionally frozen in a mold maintained at a temperature of $-30^{\circ}C$ for 1 and 24 h, respectively. Pores are generated by the sublimation of camphene at room temperature. After hydrogen reduction and sintering at $650^{\circ}C$ for 2 h, the green body of the $CuO-SnO_2$ is completely converted into porous Cu-Sn alloy. Microstructural observation reveals that the sintered samples have large pores which are aligned parallel to the camphene growth direction. The size of the large pores increases from 150 to $300{\mu}m$ with an increase in the holding time. Also, the internal walls of the large pores contain relatively small pores whose size increases with the holding time. The change in pore structure is explained by the growth behavior of the camphene crystals and rearrangement of the solid particles during the freezing process.

• 한국결정성장학회지
• /
• 제18권1호
• /
• pp.27-32
• /
• 2008

새로운 $CaZrO_3:Er^{3+}$ 축광성 형광체를 전통적인 고상반응법으로 제조하였으며, 분쇄한 축광성 형광체를 X 선 회절 분석, 광발광 분석, 열발광 분석과 휘도계를 통하여 장잔광 특성을 분석하였다. X 선 회절 분석 결과 순수한 $CaZrO_3$ 결정상을 확인 하였으며, 고온의 질소 분위기에서 합성한 경우 446 nm 와 550 nm의 넓은 발광 피크가 나타났다. 합성한 장잔광 특성의 형광체의 발광 지속시간은 254 nm UV lamp로 여기 시킨 후 어두운 곳에서 6시간 이상 스스로 발광 하였다. 발광 피크는 $Er^{3+}$ 이온의 $^5D_{5/2}{\rightarrow}^4F_{9/2},\;^2H_{12/2},\;^4S_{3/2}{\rightarrow}^4I_{13/2}$ 그리고 $^2G_{9/2}{\rightarrow}^4I_{13/2}$ 전이에 의한 것이며, 잔광 특성은 $CaZrO_3$ 격자 내에 적당한 trap center가 형성 된 것으로 판단된다.

• 한국입자에어로졸학회지
• /
• 제9권4호
• /
• pp.247-252
• /
• 2013

Removal of water contents in a gas is needed in industrial field of gas processing related on energy production/conversion, and environmental treatment. Inertial separators are economic devices for separating droplets from the gas stream. For design and incorporation of inertial pre-treatment separator, characteristics of removal of water contents with various operation conditions are needed. In this study, removal efficiency of water droplets at various flowrates (5-14 SCMM) and relative humidity (R.H.) conditions (40%, and 90%) has been investigated. At low R.H. condition, the removal characteristic is similar to the removal of solid particles. But, droplet growth resulting from the condensation of water vapor at high R.H. condition, is significant and it made increase in removal efficiency of droplet phase of water contents. For rapid removal of water contents, an effective method to enhancing condensation growth of water droplets is highly needed.

• Korean Chemical Engineering Research
• /
• 제53권6호
• /
• pp.709-716
• /
• 2015

본 연구에서는 폴리프로필렌/아이오노머/클레이 삼상 복합체에서 클레이의 분산 및 위치에 따른 복합체의 구조변화와 물성을 연구하였다. 폴리프로필렌 90 wt%, 아이오노머 10 wt%의 블렌드에 클레이를 0~10 wt% 첨가하면서 물성변화를 관찰하였다. 클레이 함량 3%이하의 복합체에서 클레이는 아이오노머 상의 내부에 존재하는 반면, 클레이 함량이 증가하면서 분산상에 클레이가 채워져 견고한 구조가 형성되며 추가적인 클레이는 계면에 존재하게 된다. 이에 따라 계면에서의 상호작용은 폴리프로필렌과 아이오노머로부터 폴리프로필렌-클레이와 아이오노머-클레이의 상호작용으로 변화하며 이에 따라 미세구조 및 유변물성이 변화한다. 복합체의 저장 모듈러스(G')는 클레이가 분산상의 내부에 존재할 때는 거의 영향을 받지 않지만 클레이가 계면에 위치하면서부터 크게 증가한다. 또한 파단면의 모폴로지 역시 클레이가 복합체의 내부에만 존재할 경우에는 분산상의 상 경계가 뚜렷하게 관찰되고 분산상의 크기가 증가하지만, 클레이가 계면에 위치할 때는 분산상의 크기가 줄어들고 파단면의 모폴로지 역시 상의 경계가 뚜렷하게 관찰되지 않는 상용화된 모폴로지를 보인다. 우리는 복합체의 유변물성의 변화를 통하여 분산상 내부구조의 변화에 따른 클레이의 위치변화와 계면에서의 상호작용의 변화를 정량화 하였다. 또한 고체상태에서의 계면 접착량 측정을 통하여 계면에서의 상호작용의 증가함에 따라 접착력이 증가하고, 미세구조상 클레이 입자가 계면에 존재할 때 결정화도가 낮아짐을 확인하였다.

• 한국분말재료학회지
• /
• 제9권6호
• /
• pp.394-408
• /
• 2002

Nanostructured high strength metastable Al-, Mg- and Ti-based alloys containing different amorphous, quasicrystalline and nanocrystalline phases are synthesized by non-equilibrium processing techniques. Such alloys can be prepared by quenching from the melt or by powder metallurgy techniques. This paper focuses on one hand on mechanically alloyed and ball milled powders containing different volume fractions of amorphous or nano-(quasi)crystalline phases, consolidated bulk specimens and, on the other hand. on cast specimens containing different constituent phases with different length-scale. As one example. $Mg_{55}Y_{15}Cu_{30}$- based metallic glass matrix composites are produced by mechanical alloying of elemental powder mixtures containing up to 30 vol.% $Y_2O_3$ particles. The comparison with the particle-free metallic glass reveals that the nanosized second phase oxide particles do not significantly affect the glass-forming ability upon mechanical alloying despite some limited particle dissolution. A supercooled liquid region with an extension of about 50 K can be maintained in the presence of the oxides. The distinct viscosity decrease in the supercooled liquid regime allows to consolidate the powders into bulk samples by uniaxial hot pressing. The $Y_2O_3$ additions increase the mechanical strength of the composites compared to the $Mg_{55}Y_{15}Cu_{30}$ metallic glass. The second example deals with Al-Mn-Ce and Al-Cu-Fe composites with quasicrystalline particles as reinforcements, which are prepared by quenching from the melt and by powder metallurgy. $Al_{98-x}Mn_xCe_2$ (x =5,6,7) melt-spun ribbons containing a major quasicrystalline phase coexisting with an Al-matrix on a nanometer scale are pulverized by ball milling. The powders are consolidated by hot extrusion. Grain growth during consolidation causes the formation of a micrometer-scale microstructure. Mechanical alloying of $Al_{63}Cu_{25}Fe_{12}$ leads to single-phase quasicrystalline powders. which are blended with different volume fractions of pure Al-powder and hot extruded forming $Al_{100-x}$$(Al_{0.63}Cu_{0.25}Fe_{0.12})_x$ (x = 40,50,60,80) micrometer-scale composites. Compression test data reveal a high yield strength of ${\sigma}_y{\geq}$700 MPa and a ductility of ${\varepsilon}_{pl}{\geq}$5% for than the Al-Mn-Ce bulk samples. The strength level of the Al-Cu-Fe alloys is ${\sigma}_y{\leq}$550 MPa significantly lower. By the addition of different amounts of aluminum, the mechanical properties can be tuned to a wide range. Finally, a bulk metallic glass-forming Ti-Cu-Ni-Sn alloy with in situ formed composite microstructure prepared by both centrifugal and injection casting presents more than 6% plastic strain under compressive stress at room temperature. The in situ formed composite contains dendritic hcp Ti solid solution precipitates and a few $Ti_3Sn,\;{\beta}$-(Cu, Sn) grains dispersed in a glassy matrix. The composite micro- structure can avoid the development of the highly localized shear bands typical for the room temperature defor-mation of monolithic glasses. Instead, widely developed shear bands with evident protuberance are observed. resulting in significant yielding and homogeneous plastic deformation over the entire sample.

• 생태와환경
• /
• 제41권4호
• /
• pp.472-484
• /
• 2008

The calibrated Andong Reservoir hydro-dynamic module (PART I) of the 2-dimensional hydrodynamic and water quality model, CE-QUAL-W2 [v3.2], was applied to examine the dynamics of total phosphorus, and chlorophyll $\alpha$ concentration within Andong Reservoir. The modeling effort was supported with the data collected in the field for a five year period. In general, the model achieved a good accuracy throughout the calibration period for both chlorophyll ${\alpha}$ and total phosphorus concentration. The greatest deviation in algal concentration occurred on $10^{th}$ October, starting at the layer just beneath the surface layer and extending up to the depth of 35 m. This deviation is principally attributed to the effect of temperature on the algal growth rate. Also, on the same date, the model over-predicts hypolimnion and epilimnion total phosphorus concentration but under-predicts the high concentrated plume in the metalimnion. The large amount of upwelling of finer suspended solid particles, and re-suspension of the sediments laden with phosphorus, are thought to have caused high concentration in the epilimnion and hypolimnion, respectively. Nevertheless, the model well reproduced the seasonal dynamics of both chlorophyll a and total phosphorus concentration. Also, the model tracked the interflow of high phosphorus concentration plume brought by the turbid discharge during the Asian summer monsoon season. Two different hypothetical discharge scenarios (discharge from epilimnetic, and hypolimnetic layers) were analyzed to understand the response of total phosphorus interflow plume on the basis of differential discharge gate location. The simulated results showed that the hypolimnetic discharge gate operation ($103{\sim}113\;m$) was the most effective reservoir structural control method in quickly discharging the total phosphorus plume (decrease of in-reservoir concentration by 219% than present level).