• 한국가구학회지
• /
• 제18권4호
• /
• pp.324-336
• /
• 2007

Throughout the twentieth century, American furniture was subject to a number of influences-both domestic and foreign. Especially, in the first half of the twentieth century, there were strong foreign influences compare to the later half of the century. Therefore, this study aimed for discussing foreign influences and for addressing issues such as attitudes toward materials, ornamentation, and technology. As a result, this study suggests how American furniture becomes instinctive moving away from strong foreign influences from the second half of the century. The twentieth century was a period of rapid and dynamic change for American furniture design. In many ways, the designs throughout the century were reflective of the social, political, and economic culture of the time. With the birth of the modern movement in Europe and a strong influx of foreign immigrants, American design in the first half of the century was characterized by a reliance on European and foreign influences. However, after the two world wars, strong domestic influences came into play. The two world wars provided the essential catalysts for change: new materials, developing technology, and changes in life style and consumer values. A historical examination of design trends and individual designers illustrates how American furniture design evolved during this period.

• Journal of Electrical Engineering and Technology
• /
• 제7권5호
• /
• pp.659-663
• /
• 2012

The application of large power transformer into a power distribution system was inevitable due to the increase of power demand and distributed generation. However, the decrease of the power transformer's impedance caused the short-circuit current of the power distribution system to be increase thus, the higher short-circuit current exceeded the cut-off ratings of the protective devices such as circuit breaker. To solve these problems, several countermeasures have been proposed to protect the power system effectively from higher fault current and the superconducting fault current limiter (SFCL) has been expected to be the promising countermeasure. In spite of excellent current limiting performances of the SFCL, on the other hand, the efforts to apply the SFCL into power system has been delayed due to both the limited spaces for the SFCL's installation and its long recovery time after the fault removal. In order to solve these problems, a hybrid SFCL, which can perform either first half cycle limiting of first half cycle non-limiting operation, has been developed by corporation of LSIS (LS Industrial System) and KEPCO (Korea Electric Power Corporation). In this paper, we tried to requirements hybrid SFCL by PSCAD/EMTDC. Simulation results of our analysis of the hybrid SFCL is that its accompanied the characteristics both the limit the fault current and quick recovery caused by the less impact from superconductor.

• 대한수학회논문집
• /
• 제32권1호
• /
• pp.119-133
• /
• 2017

In this paper, we study half lightlike submanifolds of an indefinite Kaehler manifold with a semi-symmetric non-metric connection. First, we characterize the geometry of two types of half lightlike submanifolds of such an indefinite Kaehler manifold. Next, we investigate the geometry of half lightlike submanifolds of an indefinite complex space form with a semi-symmetric non-metric connection.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권2호
• /
• pp.179-184
• /
• 2005

First lactation records (174) of Jersey${\times}$Sahiwal and Holstein Friesian${\times}$Sahiwal half breds under 9 sires maintained at Chandra Shekher Azad University of Agriculture and Technology, Kanpur, Uttar Pradesh, India from 1975-1983, were used to estimate the genetic parameters and to predict herd life milk yield and average milk yield per day of herd life from first lactation traits. The traits included were: age at first calving, first service period, first lactation period, first calving interval, first lactation milk yield, milk yield per day of first calving interval, herd life milk yield, herd life and average milk yield per day of herd life. Most of the production and reproduction traits were found to have positive and significant correlations between them on genetic as well as phenotypic scales. Total twelve regression equations were fitted. The prediction equation of herd life milk yield in both the genetic groups showed linear relationship with AFC, FSP, FLP, FLMY and MY/DCI and was apparent and significant. Similarly, polynomials for milk yield per day of herd life for J${\times}$S and HF${\times}$S half breds also showed linear trend, which was found highly significant. The highest and lowest $R^2$ values were found for FCI and AFC, respectively.

• 구강회복응용과학지
• /
• 제16권2호
• /
• pp.79-92
• /
• 2000

The purpose of this study was to estimate the morphology and the size of permanent maxillary molar in Korean Adult. The 100 dental college students with a normal dentition and without any dental prosthesis and severe caries were selected for this study. The subjects were taken impression to make study model. On the study model, authour three times measured those sizes and estimated morphological structures with a calipers, a Boley gauge and a protractor. The results were as follows; 1. In the maxilary first molar's clinical crown height, mesiolingual cusp height was 6.34mm, mesiobuccal cusp height was 6.05mm, distobuccal cusp height was 5.20mm. And in the maxillary second molar's clinical crown height, mesiobuccal cusp height was 5.85mm, mesiolingual cusp height was 5.71mm, distobuccal cusp height was 5.51mm, distolingual cusp height was 3.53mm. This result considered that the maxillary first molar inclined to distobuccal, and the maxillary second molar more upright than the maxillary first molar. 2. In the width of clinical crown, the maxillary first molar was 10.43mm, the maxillary second molar was 10.20mm, and the difference between the first molar's width and the second molar's width was 0.23mm. 3. The crown thickness was measured divided into mesial buccolingual half and distal buccolingual half. The mesial buccolingual half was 11.14mm, and distal buccolingual half was 10.35mm in the maxillary first molar, and in the maxilary second molar, mesial buccolingual half was 11.25mm, and distal buccolingual half was 9.72mm. This result considered that height of convergency located in mesial half of crown. 4. In the buccal groove length, total length and ratio, the maxillary first molar was 52.5%, the maxillary second molar was 50%. And the development of buccal groove in the maxillary first molar was 59% in case of the well developed buccal groove and 41% in case of the weak developed one. And frequency of buccal pit of the maxillary first molar was 12.5%. Whereas, the frequency of buccal of the well developed buccal groove in the maxillary second molar was 37% and that of the weak developed one was 63%. And frequency of buccal pit of the maxillary second molar was not seen. 5. The 3 cusp type tooth cannot be found in the maxillary first molar and the frequency of 3 cusp type tooth in the maxillary second molar was as small as 6% 6. In the case of 4 cusp type tooth, the size of distal lingual cusp molar was difference between in the maxillary first molar and in the maxillary second molar by about 1mm. 7. The intercuspal distance was similar in the maxillary first premolar and second molar. And intercuspal distanc of mesial half of the maxillary first molar and the maxillary second molar was silmillar, too. 8. The an measurement of occlusal surface in 4 cusp type tooth showed that the angle of occlusal surface between the distobuccal and mesiolingual was an obtuse angle, and the angle of occlusal surface between mesiobuccal and distolingual was an acute angle in the both cases of maxillary first and second molar. 9. The measurements of the development of Carabelli cusp showed that the frequency of the well developed one was 7% and that of the weak developed one was 56% in the maxillary first molar. And there cannot be found the well developed one and can be found 2.5% only in the case of the weak developed one in the maxillary second molar. 10. The well developed oblique ridge in the maxillary first molar showed the 100% frequency and that in the maxillary second molar showed the 85.5% frequency. The frequency of mesiomarginal ridge tubercle in the maxillary first molar was 82% and that in the maxillary second molar was 30.5%. And the frequency of distal accessory tubercle in the maxillary first molar can be seen about 19% and that in the maxillary second molar can be seen about 12%.

• 대한수학회보
• /
• 제51권4호
• /
• pp.979-994
• /
• 2014

We study half lightlike submanifold M of an indefinite trans-Sasakian manifold such that its structure vector field is tangent to M. First we study the general theory for such half lightlike submanifolds. Next we prove some characterization theorems for half lightlike submanifolds of an indefinite generalized Sasakian space form.

• Journal of Magnetics
• /
• 제20권1호
• /
• pp.1-7
• /
• 2015

We investigated the half-metallicity and magnetism at the (001) and (110) surfaces of YC in zinc-blende structure by using the all-electron full-potential linearized augmented plane wave method within the generalized gradient approximation. From the calculated local density of states, we found that neither (001) nor (110) surface preserves the half-metallicity. While the magnetic moment of Y atom in the YC bulk is $0.116{\mu}_B$, it is $0.057{\mu}_B$ at the topmost layer of Y-terminated (001) surface. On the contrary, C-terminated (001) YC surface exhibits stronger magnetism than the bulk structure; the calculated magnetic moment on topmost C atom is $1.084{\mu}_B$, while that of C atom in the bulk structure is $0.423{\mu}_B$. The magnetic properties of the non-polar (110) YC surface are slightly enhanced as compared with the bulk structure.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.1-5
• /
• 2016

We investigated the half-metallicity and magnetism at the (001) and (110) surfaces of CsSe in cesium chloride and zinc-blende structures by using the all-electron full-potential linearized augmented plane wave method within the generalized gradient approximation. From the calculated local density of states, we found that all the surfaces preserve the half-metallicity of the bulk structures. The surfaces with a greater polarity have stronger ferromagnetic properties when terminated with Se atoms; the non-polar surfaces do not change their electronic or magnetic properties considerably as compared with the bulk structures.

• 전자공학회논문지B
• /
• 제31B권5호
• /
• pp.42-49
• /
• 1994

In this paper we consider efficient 1-D and 2-D linear-phased half-band filter designs. We first introduce a new derivation of the existing Vaidynathan-Nguyen 's half-band filter design method, which verifies that the design provides optimal half-band filters. We then propose an approximately-linear-phased IIR half-band filter design method, which is based on the all-pass equalizer design with the linear phase -$\omega$/2. Finally, we propose an efficient method to design optimal 2-D half-band filters, for which we utilize a 2-D all pass prototype filter of half the order of the desired 2-D half-band filters.

• 한국식생활문화학회지
• /
• 제35권1호
• /
• pp.1-13
• /
• 2020

This study categorized and made considerations of the fermented soybean pastes into Meju, Chungjang, Si, mixed Jang, and other Jang in accordance with the manufacturing methods described in the fermented soybean paste section of Sangayorok (1450's), Suunjapbang (1540's) and Gyemiseo (1554). These are ancient cook books written in Chinese characters during the first half of the Joseon Dynasty. The content on the fermented soybean pastes recorded in these books included 24 items in Sangayorok, 11 items in Suunjapbang, and 14 items in Gyemiseo. In conclusion, the most important fermented soybean pastes during the first half of the Joseon Dynasty were those used to produce soy sauce-like seasoning for the purpose of a-chieving a salty taste with Meju made of soybeans as the main ingredient. The manufacturing techniques for such traditional fermented soybean pastes have been passed down through history to the present era.