• International Journal of Automotive Technology
• /
• v.7 no.7
• /
• pp.833-839
• /
• 2006

In this paper, roll behavior of three planar half car models are compared. The first model is a simple model whose contact point between a wheel and the ground is assumed to be fixed with a revolute joint. The second model is a modified model of the fIrst model, whose wheel tread width can vary. In this model, the instant center of a wheel with respect to the ground, which is crucial to find the roll center, is assumed to be at the contact point of a wheel and the ground. The last model uses the pole of a wheel with respect to the ground for small displacement as the instant center of a wheel with respect to the ground. Loci of the center of gravity point, the fixed and the moving centrodes which are traces of roll center position in the ground and the body frame respectively, wheel contact points, and instant centers of a wheel with respect to the ground are calculated.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.3
• /
• pp.82-84
• /
• 2008

A surface encoder based on the Half-shaded square pattern (HSSP) is presented. The HSSP working as reference grid is composed of the straight lines which are easy to be fabricated and make measuring time short. Since the periodic cell is separated in ON/OFF by the $45^{\circ}$ straight line, the duration from the starting point of scanning to the first rising edge and the duty cycle of the pulse train vary with respect to the position of the starting point. And the relationship between X and Y position and the duration, and duty cycle is described in the simple linear equation. Therefore, it is possible to measure X and Y position with the measured duration and duty cycle without calculating load. Through the test set-up, the feasibility of the proposed surface encoder was verified. Also the future works for improvement of performance were suggested.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.10
• /
• pp.1832-1837
• /
• 2011

The fault current has increased due to the large power demand in power distribution system and network distribution system. To protect the power system effectively from the increased fault current, the superconducting fault current limiter (SFCL) has been notified. However, the conventional SFCL has some problems such as cost, operation, recovery, loss. To solve some problems, the hybrid superconducting fault current limiter using the fast switch was proposed. However, hybrid SFCL also has a problem that is protection coordination in power distribution system with hybrid SFCL. In this paper, the fault current limiting characteristics of hybrid SFCL with first half cycle non-limiting operation according to the fault angle, the resistance of superconducting element, and the magnitude of Current Limit Resistor (CLR) which are the components of hybrid SFCL were analyzed through the experiments.

• Journal of information and communication convergence engineering
• /
• v.20 no.4
• /
• pp.235-241
• /
• 2022

A dispersion map was proposed to improve the compensation effect of a distorted WDM (wavelength division multiplexed) channel in a dispersion-managed link coupled with optical phase conjugation. The dispersion map is an origin-symmetric structure around the optical phase conjugator in the middle of the transmission path. In addition, the dispersion map has a form in which a constant dispersion accumulation pattern is repeated regularly. Through simulation, we confirmed that the application of the origin-symmetric dispersion map with a repetitively shaped configuration was more effective in compensating for the distorted WDM channel than in the dispersion-managed link with a conventional dispersion map. In addition, we confirmed that the compensation effect could be increased when the cumulative dispersion distribution of the origin-symmetric distribution map had a positive value in the first half section and a negative value in the second half section. Further, we observed that as the number of repeated dispersion accumulation patterns increased, the residual dispersion per span should also be increased.

• Journal of Magnetics
• /
• v.5 no.2
• /
• pp.65-71
• /
• 2000

Although the electromagnetic launcher technology has been progressed significantly during the past two decades the number of firing test facilities are not many. This is prbably due to the large budget and man power required to build and maintain full scale electromagnetic launcher facilities. As the EM launcher technology's potential capabilities have been somewhat demonstrated with the full scale large systems the research is now headed more toward overcoming specific difficulties and answering questions experimentally with smaller, cost effective systems. The first half of this paper presents EM launcher's improved sub-scaling relationships based upon magnetic, thermal and momentum differential equations and EM launcher's basic equations. With the proposed scaling method the field variables can be matched or scaled linearly between the two geometrically scaled systems. The second half of the paper presents pulsed power system's circuit analysis and design technique, which is applied to the capacitor-powered small pulsed power system with crow-barring circuitry. The effect of the so-called speed volt is included. A sub-scaled small system's design is provided as an example.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.06a
• /
• pp.272-277
• /
• 1998

If we want to compare the form of two objects, the human vision takes into account the parameter's width/length/height at the same time. however, the machine needs to compare width then lengths and finally height. In each comparison the machine considers only one character. The goal of this paper is to imitate the human manner of comparison and recognition by using two or three characters instead of one during the comparison. The ellipse is a first approach of comparison because it provides us a general and a simple relation that can link two parameters that are the half axis of the ellipse. Indeed, we assimilate each character to a half axis of the ellipse and the result is a geometrical figure that varies according to values of the two characters.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.49-55
• /
• 2007

The quality of chaotic mixing in three-dimensional micro channel flow has been numerically studied using Fractional-step method (FSM) and particle tracking techniques such as $Poincar{\acute{e}}$ section and Lyapunov exponents. The flow was driven by pressure distribution and the chaotic mixing was generated by applying alternating current to electrodes embedded on the bottom wall at a first half period and on the top wall at a second half period. The equations governing the velocity and concentration distributions were solved using FSM based on Finite Volume approach. Results showed that the mixing quality depended significantly on the modulation period. The modulation period for the best mixing performance was determined based on the mixing index for various initial conditions of concentration distribution. The optimal values of modulation period obtained by the particle tracking techniques were compared with those from the solution of concentration distribution equation using FSM and CFX software and the comparison showed their good match.

• Fibers and Polymers
• /
• v.6 no.4
• /
• pp.339-342
• /
• 2005

In this paper, a hand-operating method (tiled test method) of the wool-blending sample is made out, and make use of the method, the test of wool-blending bundle in different blending ratio is accomplished. According to the test data, the synthesis method of the stretch curve is worked out and the synthesis software for the typical stretch curve of wool-blending bundle is designed. Through laboratory hand-operating method, the blending fasciculus applying to fiber bundle test can be obtained in a short time. Calculation for sampling is accomplished in the article. We bring up 9 new signs to describe the characteristics of the curve behind peak for the first time: elongation behind peak (HE), elongation percentage behind peak (HEP), relative elongation rate behind peak (RHE), total break work $(W_a)$, break work behind peak (HW), break work coefficient behind peak (HWC), elongation percentage of half-load behind peak (HEL), load percentage of half-elongation behind peak (HLE), break efficiency behind peak (HEC).

• 중국학논총
• /
• no.67
• /
• pp.81-100
• /
• 2020

Yu-hua's disharmony with his personal and inner 'father' in his first-half novel expanded to expose the absence of the role of the social and national 'father' in the latter half. Yu-hua's novels revealed his personal sense of resistance through the absence of his father, and then expanded the negative "father image" in this family to the state and society to shed light on the absence and irresponsibility of the "father" in Chinese society and the state. I think that reading Yu-hua's novels in this way in the future will make it easier to understand the theme of these novels, and also to recognize the time value of these novels.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1575-1580
• /
• 2009

Maglev vehicle has two kinds of suspension system such as a secondary suspension with air-spring and a primary suspension as electromagnetic suspension which composed of electromagnet, magnet driver, controller and sensors. The interaction between each dynamic component of vehicle and track effects the stability and running performance. To achieve the specified performance of vehicle, many various approaches of research were tried, then as the result of these efforts, the first commercial operating with Maglev will start soon. The bogie for revenue service from 2012 has some significant modifications compared to the previous one, and to verify the changes the half prototype vehicle was manufactured and took the running performance test. In this report, we will introduce the stage of manufacturing and report results of dynamic performance tests to verify new concept of bogie mechanism.