• 지질공학
• /
• 제24권4호
• /
• pp.455-461
• /
• 2014

The Honam-Jeju, Korea-Japan, and Korea-China subsea tunnel construction projects have drawn significant attention since the early 2000s. These subsea tunnels are much deeper than most existing natural shallow sea tunnels linking coastal areas. Thus, the need for developing new technologies for the site selection and construction of deep subsea tunnels has recently emerged, with the launch of a research project titled "Development of Key Subsea Tunnelling Technology" in 2013. A component of this research, an analysis of deep subsea geological structure, is currently underway. A ground investigation, such as a borehole or geophysical investigation, is generally carried out for tunnel design. However, when investigating a potential site for a deep subsea tunnel, borehole drilling requires equipment at the scale of offshore oil drilling. The huge cost of such an undertaking has raised the urgent need for methods to indirectly assess the local geological structure as much as possible to limit the need for repeated borehole investigations. This study introduces an indirect approach for assessing the geological structure of the seafloor through a submarine bathymetry analysis. The ultimate goal here is to develop an automated approach to the analysis of submarine geological structures, which may prove useful in the selection of future deep subsea tunnel sites.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.302-305
• /
• 2007

In recent years, many researches on new storage media with high capacity and information are developing. For manufacture of optical storage with high capacity, the injection molding process is generally used. In order to increase the filling ratio of the injection molding structure, the injection molding process required for high injection pressure, packing pressure and temperature control of the mold. However, conventional injection molding process is difficult to increase the filling ratio using injection master with the range of several nanometers and high aspect ratio. In order to improve and increase filling ratio of nano-structure with high aspect ratio, the active temperature control of injection mold was used. Experimental conditions were used injection pressure, time and temperature. Consequently, by using the peltier device into injection mold, we carried out the efficient and active temperature control of mold at low cost.

• 한국항만경제학회지
• /
• 제19권1호
• /
• pp.139-159
• /
• 2003

This study deals sith some problems of foreign direct investment and seeks for the ways of activating foreign direct investment (hereafter F.D.I.) by analyzing the Korean economic structure that is faced with the neo-protectivism and nationalism of the advanced or foreign countries currently. During a transformational process in the transitional period of world trade environment, it is necessary for Korea not only to learn the higher technology for advanced countries, but also to apply techonology to their economic structure in order to enter into competition with the advanced countries. Based on the experiences and accomplishments from their investments, Korean enterprises should turn their business into F.D.I. and act appropriately in order to keep the balance between indoor and outdoor investment. Looking through the ways to activate F.D.I., we may make conclusions as follows: 1. Government policy transparency 2. Prudential Macro Economic policy 3. International policy coorperation system 4. Solidification of Foreign Commercial intercourse to Developing countries 5. Globalixation base of domestic coorperation 6. High efficiency- low cost of business coorperation enterprise 7. Attacktive investiestment strategies on conclusive competive advantage 8. Multilateral investment Area 9. New recognixation on marketing investment etc. F.D.I. strategies

• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.407-412
• /
• 2011

Recently, the Malaysian government had been developing new technologies to the construction industry and one of them is the Industrialised Building System (IBS). The government urged that IBS is 100% utilized in all construction projects. It is believed that the application of IBS helps in reducing construction duration and cost, solving the problems of overflow of foreign workers in the site and improving performance and appearance of a structure. However, there are some parties like the contractor who feel reluctant to utilize this system because there are risks. They worry that their trades will be affected as IBS construct a structure using components which are manufactured in a factory and assemble on site. Therefore, this research is to find out whether IBS benefits the country's economy by focusing on the business created by investing in IBS. A comprehensive supply chain for IBS will be developed to compare with the traditional construction supply chain as to determine businesses or trades created and eliminated. This paper is looking at the theoretical framework about business opportunities due to the Government policy on embarking IBS.

• 소성∙가공
• /
• 제13권3호
• /
• pp.242-247
• /
• 2004

Literature review on reliability test method for developing high performance optical/thermofluidic components. Since the miniaturization by the conventional mechanical process is limited to milli-structure, i.e. $10^{-3}m$, new technology for fabricating of mechanical components is needed to match cost, reliability, and integrability criteria of micro-structure. Although numbers of various researches on MEMS/MOEMS devices and components, including material characterization, design and optimization, system validation, etc., the lack of standards and specifications make the researches and developments difficult. For that reason, this paper is intended to propose the methods of reliability test for measuring the mechanical property of optical/ thermofluidic components.

• 한국전자거래학회지
• /
• 제6권1호
• /
• pp.55-67
• /
• 2001

Over the past decade, the topic of work breakdown structure (WBS) has gained an increasing amount of attention from information technology Professionals as an effective tool for managing the complexity of a large-scale information system development project. It is a method for planning and controlling a large-scale information system development. A WBS provides the basis for project organization, cost estimation, task scheduling, and contract management. Based on the authors' practical experience, this paper discusses how to establish a specific WBS and some considerations for developing a well-defined WBS. The model of WBS suggested in this study will provide useful insight and guidelines for establishing the spec-ific WBS for a large-scale information systems development.

• 한국CDE학회논문집
• /
• 제12권3호
• /
• pp.209-219
• /
• 2007

Designing a complex system such as an LCD developing system becomes inefficient when many designers are involved and create their own parts even though they can be used repeatedly in other sections. Thus, this paper proposes a new design process that can maximize the number of common parts in complex system design by organizing the 3D design process. The proposed design process consists of 5 stages: analysis of design intention, definition of initial product structure, definition of skeleton model, sharing design intention with all assembles, control of correlation between components. The proposed design process can maximize common parts in design process, which results in shorter lead time, less production cost, and greater economic benefits.

• 정보처리학회논문지D
• /
• 제11D권3호
• /
• pp.597-604
• /
• 2004

정확한 소프트웨어 비용 추정은 개발자와 고객 모두에게 중요하다. 대부분의 비움 추정 모델들은 규모 추정으로부터 틴은 라인 수와 기능점수와 같을 규모 측도에 기반을 두고 있다. 규모 추정의 정확도는 비용 추정 정확도에 직접적으로 영향을 미친다. 이에 따라 대부분의 회귀기반 비용추정 모델들은 규모에 기반한 멱함수 형태를 적용하고 있다. 생물의 성장, 기술의 발전과 인간의 학습 능력 등 많은 성장 현상들은 S자 곡선을 따른다. 본 논문은 성장곡선을 이용하여 개발노력을 추정하는 모델을 제시하였다. 제시된 모델은 소프트웨어 규모가 증가함에 따라 소요되는 개발 비용이 성장곡선을 따른다고 가정한다. 일반적인 소프트웨어 규모 추정 기법인 기능점수, 완전기능점수와 유스케이스 점수에 기반하여 성장곡선 모델의 적합성을 검증하였다. 제안된 성장곡선 모델들은 멱함수 모델과 비교 시 상호 견줄만한 성능을 보여 소프트웨어 비용 추정분야에 석용 가능함을 보였다.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.947-956
• /
• 2018

This research has been conducted to design upright parts of hand-made vehicles with the purpose of reducing material and machining cost while ensuring structural safety. Aluminum knuckles were modelled with three parts in order to enhance design flexibility as well as to reduce CNC machining cost. A vehicle model was constructed in CAD program and simulated in ADAMS View in order to estimate joint forces developing during 20 degree step steering condition at 60km/h. The joint forces obtained in the vehicle dynamics simulation were used for the structural analysis in ANSYS and dimensions of knuckle parts were adjusted until the lowest safety factor reached 2.0. The weight of knuckle decreased by 50% compared to the previous version that was designed without the structural analysis. The overall manufacturing cost decreased by 33% due to the reduction in the material as well as the CNC machining effort.

• 대한토목학회논문집
• /
• 제33권6호
• /
• pp.2575-2582
• /
• 2013

공공건설공사 발주제도 운영에 있어 기술경쟁을 지향하는 턴키 및 대안방식 등 설계 시공일괄방식의 경우, 시설물의 품질향상 및 건설기술 발전에 기여하였음에도 불구, 계약되는 공사비가 설계 시공 분리발주방식을 적용하는 공사보다 높아 예산낭비 우려가 있다는 지적과 함께 수주독점, 입찰담합, 심의비리 등의 문제가 쟁점이 되고 있다. 그러나 실제 발주방식별 사업성과와 효과에 대해 정밀 비교분석한 사례가 없는 실정이며, 단순히 낙찰률 등 사업의 한정된 일반적 정보만으로 사업효과를 논의하고 판단하는 것은 자칫 오류를 범할 우려가 있다. 이에 공공 건설공사를 대상으로 계약에서 준공에 이르기까지 실제 집행한 공사비 자료를 광범위하게 조사하여 비용의 투입구조 및 변동추세 등 발주방식별 특성을 비교분석하고 공공건설공사 발주제도의 올바른 이해와 효율적 운영을 도모하고자 한다.