• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.18-34
• /
• 2021

Pedestrian deaths in Korea due to traffic accidents are 40 percent of the fatalities in traffic accidents, which is about twice the average of OECD member countries. To reduce severe pedestrian accidents, it is necessary to apply the accident reduction measures to high-risk drivers (novice, elderly, and commercial vehicle drivers) who are more likely to cause traffic accidents than general drivers. Therefore, this study analyzed the effect of safe driving education on high-risk drivers' behavior. Here, the safe driving education is chosen as the measure to reduce traffic accidents. As part of the study, sudden pedestrian crossing situations were implemented in the driving simulator, and the vehicle trajectory data were collected to compare the driving behavior before and after the education. Most surrogate safety measures showed no improvement in the driving behavior of novice and elderly drivers, and the effect of safe driving education was found to be significant only in the group of commercial vehicle drivers. The results implied that additional measures such as pedestrian safety infrastructure and driver assistance systems, apart from the safe driving education, may be needed for novice and elderly drivers to reduce pedestrian accidents caused by them. With the findings mentioned above, this study is expected to provide a foundation to establish a plan to reduce pedestrian accidents caused by high-risk drivers.

• Journal of Navigation and Port Research
• /
• v.43 no.4
• /
• pp.231-236
• /
• 2019

As ships become bigger, faster, and diverse, transportation has increased the usage of marine vehicles. However, ship accidents are increasing. Ship accidents cause loss of life and property as well as environmental disasters. The occurrence of ship accidents causes enormous economic and environmental impacts. Notably, in the case of passenger ships, methods for preventing ship accidents are being discussed to avoid losing numerous human lives. The purpose of this study is to provide essential data for evacuation before reaching the dangerous time by predicting the time to reach the risk of capsizing based on the heeling angle of the passenger ship. Based on sinking accidents between 2012 and 2016, we set up specific scenarios and simulated the PRR1 data using commercial software MOSES V20. In the case of the linear equation, the simulation results showed a low error rate because the simulation data showed the linear graph. In the case of the quadratic equation, the error rate was low at the beginning but showed a high error rate at the subsequent angle.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.416-422
• /
• 2012

To prevent serious maritime accident and eliminate the cause of the potential maritime accidents, Maritime Safety Audit Scheme was formally institutionalized through amendment of Maritime Traffic Safety Act(May 27, '09). At the initial step of the enforcement of the law, it has risen the necessity of amending the present institution concerning with the range of applicable business, method of practice, detailed technical standards in the assessment articles, etc. Among them, the assessment of marine traffic congestion has been practiced as a mandatory assessment article, but it is analyzed that the assessment doesn't reflect current variation of ships' size and its speed. By analyzing the status of assessments on marine traffic congestion so far and collecting experts' opinion, this paper suggests draft amendments to improve technical standards on the assessment of marine traffic congestion.

• Fire Science and Engineering
• /
• v.29 no.2
• /
• pp.79-83
• /
• 2015

The fire accident is a representative type of disaster that can largely impact on business. Therefore, precautionary measures and rapid initial response is very important when a disaster occurs. The storage of porous combustibles is inevitable in coal yard, plywood processing industry, and others that are currently operating. Initial fire fighting of fire and identifying the ignition point in such a porous combustible storage space are so difficult that if the initial response is failed, being led to deep-seated fire, surface fire is likely to result in secondary damage. In addition, deep-seated fire can cause personal injuries and property damage due to a large amount of toxic gases and reignition. Therefore damage reduction measures is required around the storage space to handle a porous flammable. Improving the penetration performance of the concentration of the surfactant is carried out as underlying study, which is about an deep-seated fire extinguishing efficiency augmentation when using wetting agents. The porous materials used in the experiments is radiata pine wood flour, which occupies more than 75% of the domestic wood market. Fire fighting water is selected as Butyl Di Glycol (BDG), which is being used for infiltration extinguishing agent, and the experiment was carried out by producing a standard solution. The experiment was carried out on the basis of the Deep-Seated Fire Test of NFPA 18. The amount of watering, porous material to the internal amount of penetration, and runoff measurement out of the porous material was conducted. According to experimental results, as the surface tension is reduced, the surfactant concentration macroscopic penetration rate decreases, but infiltration to a porous material is shown to have growth characteristics.

• Journal of Korean Society of Transportation
• /
• v.35 no.2
• /
• pp.116-128
• /
• 2017

Traffic accidents can be defined as a physical collision event of vehicles occurred instantaneously when drivers do not perceive the surrounding vehicles and roadway environments properly. Therefore, detecting the high potential events that cause traffic accidents with monitoring the interactions among the surroundings continuously by driver is the prerequisite for prevention the traffic accidents. For the analysis, basic data were collected to analyze interactions using a test vehicle which is equipped the GPS(Global Positioning System)-IMU(Inertial Measurement Unit), camera, radar and RiDAR. From the collected data, highway geometric information and the surrounding traffic situation were analyzed and then safety evaluation algorithm for driving vehicle was developed. In order to detect a dangerous event of interaction with surrounding vehicles, locations and speed data of surrounding vehicles acquired from the radar sensor were used. Using the collected data, the tangent and curve section were divided and the driving safety evaluation algorithm which is considered the highway geometric characteristic were developed. This study also proposed an algorithm that can assess the possibility of collision against surrounding vehicles considering the characteristics of geometric road structure. The methodology proposed in this study is expected to be utilized in the fields of autonomous vehicles in the future since this methodology can assess the driving safety using collectible data from vehicle's sensors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.346-353
• /
• 2016

In the design conditions of some research reactors, the siphon phenomenon can cause continuous efflux of water during pipe rupture. A siphon breaker is a safety device that can prevent water efflux effectively. However, the analysis of the siphon breaking is complicated because many variables must be included in the calculation process. For this reason, a simulation program was developed with a user-friendly GUI to analyze the siphon breaking easily. The program was developed by MFC programming using Visual Studio 2012 in Windows 8. After saving the input parameters from a user, the program proceeds with three steps of calculation using fluid mechanics formulas. Bernoulli's equation is used to calculate the velocity, quantity, water level, undershooting, pressure, loss coefficient, and factors related to the two-phase flow. The Chisholm model is used to predict the results from a real-scale experiment. The simulation results are shown in a graph, through which a user can examine the total breaking situation. It is also possible to save all of the resulting data. The program allows a user to easily confirm the status of the siphon breaking and would be helpful in the design of siphon breakers.

• Clinics in Shoulder and Elbow
• /
• v.1 no.2
• /
• pp.205-211
• /
• 1998

The comminuted fracture and dislocation of the proximal humerus occur more frequently in older patient group and operative treatment is difficult due to poor bone quality. Based on Neer's work, hemiarthroplasty has now become widly accepted for the management of the three-part fracture and four-part fracture-dislocation of the proximal humerus in old age group. The purpose of this study is to evaluate function, pain relief, and patient satisfaction after hemiarthroplasty for proximal humerus fractures and dislocations. Authors reviewed and analyzed 14 prosthetic replacement in comminuted proximal humeral fracture and dislocation at the Department of Orthopaedic Surgery, Yonsei University Wonju College of Medicine from March, 1988 to May, 1997. The results were as follows the average age was 58.9years and the ratio of males and females was 5:9. The most common cause of injury was traffic accident(43%). According to the classification of Neer, three part fracture were three(21%), four-part fracture and four-part fracture-dislocation were eleven(79%). The prosthetic replacement was performed within two weeks in eight patient and six were performed after two weeks. The results were analysed according to Neer's criteria and five cases showed satisfactory results. We concluded that hemiarthroplasty for fracture and dislocation of the proximal humerus facilitated the restoration of humerus length and pain relief, thereby allowing earlier motion to prevent the development of painful shoulder: stiffness.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.17-25
• /
• 2009

This research analyzed the changes of drivers' visual workload with beta wave of bionic signals from brain's occipital lobe from entrance to exit section of the Yuksimnyeong tunnel which is 3.1km long in Daejeon-Tongyeong section of Jungbu expressway. There are 10 subjects who Participate our experiments and the results are as follows. First. the drivers' visual workload is higher about 41% in entrance section of the tunnel than 200m in advance of the section of the tunnel. Second, it is higher than 200m in advance of the section of the tunnel by 34.5% that the value of the drivers' visual workload who is driving in the tunnel. Third, as a result of analyzing the tunnel into 200m unit section, it is statistically different from other sections' at the 1.0km and 2.4km section from the entrance of the tunnel. If drivers sustain average visual workload for safe driving in very long tunnel, it's not desirable environment that drivers' visual workload goes under the average workload. Therefore, it would be the section where drivers who is driving in tunnel could cause a traffic accident.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.927-935
• /
• 2019

Screw-failure accidents in small ships frequently occur in coastal waters. In particular, vessels' propulsion systems are frequently coiled due to objects such as fish-nets and ropes that float on the sea. The failure of the ship's propulsion system can cause primary accidents such as ship operation delays and drifting due to loss of power; furthermore, the possibility of secondary accidents such as those involving operators in the underwater removal of rope stuck in a propeller. Ships that do not have the proper tools to solve these problems must be either lifted onto land to be repaired or divers must dive directly under the ship to solve the problem. Accordingly, some small vessels have been equipped with rope-cutter devices on the propeller shaft to prevent ship propeller system accidents in recent years; however, they are not being applied efficiently due to the cost and time of installation. To solve these problems, this study develops an underwater rope-cutter device and controller for the removal of propeller and shaft foreign material in small vessels. This device has simple structures that use the principle of a saw. Meteor gears and crank pins were used for the straight-line rotation of saw blades of the underwater rope-cutters to allow for long strokes. Furthermore, the underwater rope-cutting machines can be operated by being connected to the ship battery. The user, a non-professional, can ensure convenience and stability by applying reverse current prevention and a speed control circuit so that it can be used more conveniently and safely.

• Archives of Plastic Surgery
• /
• v.35 no.5
• /
• pp.597-602
• /
• 2008

Purpose: Presently, silicone rubber is chosen most frequently for nasal augmentation. However, there is a possibility of extrusion with this material. Sometimes, noses are prone to be traumatized, and then silicone rubber has a possibility of deformity or deviation resulting in trauma. We experienced cases with complications and traumatic deformities after the augmentation rhinoplasty. Methods: A retrospective review was performed to determine the characteristics of the implanted nasal silicone prosthesis after trauma. The patients' data such as deviation of implant, shape of fracture, age and sex of the patient, time of treatment, operative methods were reviewed. From March 2001 to March 2008, this study was performed in 30 patients. The patients were 25 females and 5 males, from 24 to 60 years of age, with an average of 42. All patients had previous augmentation rhinoplasty with silicone implant. Results: All of the 30 patients were confirmed as deviation of silicone and nasal bone fractures in the facial bone CT scan. The most common cause of fracture was traffic accident. The classification of nasal trauma after augmentation was done by facial bone CT. Class I: Deviation of silicone without nasal bone fracture without extrusion(12 cases, 40%), Class II: Deviation of silicone without nasal bone fracture and with extrusion(4 cases, 13%), Class III: Deviation of silicone with nasal bone fracture and without extrusion(8 cases, 27%), Class IV: Deviation of silicone with nasal bone fracture and with extrusion(3 cases, 10%), Class V: Mild deviation of silicone with nasal bone fracture(3cases, 3%). Specially, the comminuted or trapezoid nasal fracture was confirmed in 11 cases(Class III, IV). Conclusion: The problems of silicone implant have generally been related to foreign body reactions, rigidity of the material, encapsulation, infections, and extrusion. We experienced 11 cases of comminuted or comminuted trapezoid shaped fracture below nasal implant. So, we think this phenomenon could be used in late problem of silicone implant.