• Smart Media Journal
• /
• v.9 no.2
• /
• pp.16-21
• /
• 2020

Recently, mobile traffic is increasing exponentially as major traffic is transferred to IoT and visual media data in the dissemination of mobile communication terminals and contents use. In order to overcome the limitations of the existing LTE system, 5G mobile communication technology (5G) is a technology that meets 1000 times data traffic capacity, 4G LTE system acceptance, low latency, high energy efficiency, and high cost compared to 4G LTE system. The path loss due to the use of the frequency domain is very high, so it may be difficult to provide a service compared to the existing 4G LTE system. To overcome these shortcomings, various techniques are under study. In this paper, small cell technology is introduced to improve the system performance of 5G mobile communication systems. The performance is analyzed by comparing the results of small cell technology application, macro communication and small cell communication, and the results of the proposed algorithm application for power control. The analysis results show that the use of small cell technology in the 5th generation mobile communication system can significantly reduce the shadow area and reduce the millimeter wave path loss problem.

• The Journal of Engineering Geology
• /
• v.13 no.4
• /
• pp.405-418
• /
• 2003

Measurements of volumetric water content and saturation of porous media are very important factors in understanding the physical characteristics of soil, groundwater recharge by rainfall, pollutant movement, and slope failure. To measure such physical parameters, a permittivity method using electromagnetic wave is applied and use is made of the special permittivity response of understand to water and ethanol. In particular, the estimation is required because permittivity is influenced by the nature of the underground environment. In this study, we carried out experiments on the relative dependency of soil density, temperature and salinity of standard sand and granitic weathered soil using FDR-V system (Frequency domain reflectometry with vector network analyzer) within a frequency range of 1 - 18 GHz. The results of the study showed that the dielectric constants of standard sand and granitic weathered soil increased with increased volumetric water content of soil. However, the dependency of soil density was found to be a little low. Changes of dielectric constant with temperature appeared definitely in the real part of 1 GHz. That is, the dielectric constant of real part at 1 GHz of water and standard sand increased with the rise of temperature. However, ethanol showed decreased tendency. The study also showed that dielectric constant increased with increase in salinity at imaginary part of 1 GHz. It could be concluded from this study FDR-V system can adequately measure the physical properties of soil and the degree of salinity concentration of porous media within 1 GHz frequency range using dielectric constant.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.1
• /
• pp.45-53
• /
• 2019

In this paper, three types of array antennas for 5G mobile devices operating at 28 GHz were designed, and their performances were compared. The isolation between antenna elements was compared based on $S_{21}$. The $S_{21}$ of dipole, slot, and patch type are -13.76 dB, -16.88 dB, and -11.47 dB, respectively, with the slot-type antenna having the highest isolation. In order to compare the beam coverage performance, several characteristics such as beam width and maximum beam steering angle were analyzed. The analysis shows that the slot type has the widest steering angle of $63^{\circ}$ while the patch type has narrowest with $36^{\circ}$. In addition, to verify the performance of the antennas in the actual usage environment of the device, antenna characteristics in talk mode and data mode were analyzed through simulation. The results confirmed that the slot-type array antenna is the most suitable array antenna element for 28 GHz 5G mobile devices.

• Journal of Broadcast Engineering
• /
• v.17 no.6
• /
• pp.964-975
• /
• 2012

Recently the attention on digital hologram that is regarded as to be the final goal of the 3-dimensional video technology has been increased. A digital hologram can be generated with a depth and a RGB image. We proposed a new system to capture RGB and depth images and to convert them to digital holograms. First a new cold mirror was designed and produced. It has the different transmittance ratio against various wave length and can provide the same view and focal point to the cameras. After correcting various distortions with the camera system, the different resolution between depth and RGB images was adjusted. The interested object was extracted by using the depth information. Finally a digital hologram was generated with the computer generated hologram (CGH) algorithm. All algorithms were implemented with C/C++/CUDA and integrated in LabView environment. A hologram was calculated in the general-purpose computing on graphics processing unit (GPGPU) for high-speed operation. We identified that the visual quality of the hologram produced by the proposed system is better than the previous one.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.493-500
• /
• 2019

In this study, sensitivity analysis of sediment transport scaling factors in Delft3D-Morphology was performed to examine the effect those parameters on simulation results of cross-shore profile changes. For numerical experiments, one-year wave time series data which were observed in 2018 on the Maengbang coast in Gangwon prefecture were applied as external force. Bathymetric data observed in January and October of the same year were used as initial bathymetric data and annual bathymetric change data, respectively. The simulation performance of the model was evaluated based on the Brier Skill Score index for each part by dividing an arbitrary cross section within the calculation domain into the onshore and offshore parts. As a result, it was found thet the f_BED variable has a slight effect on the simulation results. The f_BEDW and f_SUSW variables show good simulation performance in onshore part when the value less than 0.5 is applied and vice versa. Among the experimental conditions, the optimal combinations of variables are f_BED = 1.0, f_BEDW = 1.0, f_SUSW = 0.1 for the onshore region and f_BED = 1.0, f_BEDW = 1.0, f_SUSW = 0.5 for the offshore region. However, since these combinations were derived based on the observation data on Maengbang beach in 2018, users should be careful when applying those results to other areas.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.34-42
• /
• 2017

Since existing nonintrusive appliance load monitoring (NIALM) studies assume that voltage fluctuations are negligible for load identification, and do not affect the identification results, the power factor or harmonic signals associated with voltage are generally not considered parameters for load identification, which limits the application of NIALM in the Smart Home sector. Experiments in this paper indicate that the parameters related to voltage and the characteristics of harmonics should be used to improve the accuracy and reliability of the load monitoring system. Therefore, in this paper, we propose an improved NIALM method that can efficiently analyze the types of household appliances and electrical energy usage in a home network environment. The proposed method is able to analyze the energy usage pattern by analyzing operation characteristics inherent to household appliances using harmonic characteristics of some household appliances as recognition parameters. Through the proposed method, we expect to be able to provide services to the smart grid electric power demand management market and increase the energy efficiency of home appliances actually operating in a home network.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.6
• /
• pp.289-299
• /
• 2020

The purpose of this study was to confirm the effect of mindfulness education on perceived stress, mindfulness, psychological well-being, and brain waves. The study used a repeated-measures design to examine 42 female university students currently enrolled in mindfulness courses. Subjects participated in the mindfulness course once a week for eight weeks, 50 minutes per session. The main outcome variables, such as perceived stress, mindfulness, and psychological well-being, were measured with a structured questionnaire and brain waves were measured with an electroencephalograph. The same variables were then measured after the completion of the eight-week course. The results demonstrate that perceived stress significantly decreased from 1.85±0.39 to 1.66±0.39 points (t=3.44, p=.001), while, on the other hand, mindfulness increased from 3.10±0.26 points to 3.19±0.32 points (t =-2.78, p=.008). There was also a significant difference in the level of autonomy, a subcategory of psychological well-being (t=-2.70, p=.010). In addition, EEG indicated significant changes in the frequencies of Theta channel 19 and Rapid Alpha channels 7 and 10. These results suggest that further studies are needed to elucidate the effects of mindfulness education through the modification of mindfulness course plans, diversification of teaching methods, and improvement in the educational environment.

• Journal of Conservation Science
• /
• v.28 no.3
• /
• pp.235-245
• /
• 2012

Nondestructive deterioration diagnosis has been carried out for the former ore dressing plant of the Yongwha mine in Yeongyang (Registered Cultural Property No. 255). Deterioration rates about organic contaminant and soil of the upper part (7 to 13 layer) indicate higher than the lower part (1 to 6 layer) of the ore dressing plants. By contrast, deterioration rates such as crack, break out and discoloration of the lower part indicate very higher than the upper part. It is estimated that the plants of the lower part that mechanical and chemical process had been done for flotation were damaged severely by physicochemical weathering with reaction of concrete and chemical solution. As results of ultrasonic velocity measurement, average p-wave velocity of plants were measured 2,462m/s (compressive strength $529kgf/cm^2$). As for the analytical results of surface contaminants and soil compositions using P-XRF, they were identical with major elements (Cu, Zn, Pb, Fe and As) of ore minerals from the Yongwha mine. Therefore, the ore dressing plant should be treated by phytoremediation with conservation because heavy metals could impinged upon plants and natural environment.

• Journal of Navigation and Port Research
• /
• v.33 no.5
• /
• pp.315-321
• /
• 2009

The Very Large Marine Structure has been widely used new method of ocean space instead of method for reclamation Therefore, VLFS is proposed to coincide on such request. It can be established regardless of nature of soil and height of water, and stream of flow exists under the floating structure, there is seldom effect in natural environment. Fuertherrnore, it can do easily to do assembly and taking to pieces due to expansion or removal. Based on the regulation by class, VLFS have to possess more than enough structural strength against severe wave loading induced by green sea condition Therefore, There are performed structural simulation as well as experimental test about expected loading scenario in order to examine the safety of structure. Up to now, various examinations based on the strength limit value of the main structural material have been done based on the elasticity response analysis. However, there is little finding about the collapse behavior and the safety when the load that exceeds the collapse of the material acts. In the present study, we investigated the collapse behavior based on the ultimate limit state calculated by FE-analysis.

• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.255-258
• /
• 2000

본 연구는 육성돈에 있어 인분해효소인 phytase의 첨가가 환경친화성사료개발을 위한 기초자료로 사용하기 위해 영양소 이용률을 측정하였다. 대조구는 옥수수-대두박의 육성돈 사료이고, 처리구는 대조구 사료에 Phytase의 첨가 수준을 500 unit 및 1,000 unit을 첨가한 구로 3×3 Latin Square 방법으로 실시하였다. 건물과 질소에 대한 소화율에서는 각 처리구간에 유의적인 차이가 없었다(P>0.05). 회분, 칼슘 및 인의 소화율의 경우 phytase 첨가구가 대조구에 비해 높은 수준을 보였다(P<0.05). 돼지가 섭취한 인의 양은 phytase 첨가구가 대조구에 비해 증가하였다. 또한 인의 흡수량에서 phytase 첨가구가 대조구에 비해 높았다(P<0.05) 분과 뇨의 총 인 배설량은 유의적인 차이를 나타내지 않았다. 칼슘의 섭취량은 처리구가 대조구에 비해 높았다. 칼슘의 분 배설량은 각 처리구간에 별 다른 차이를 보이지 않았으나(P>0.05), 뇨의 배설량은 처리구가 대조구보다 적은 양이 배설되었다. 소화된 아미노산 중 cystine, isoleucine, tyrosine, phenylalanine은 처리구가 대조구에 비해 소화율이 현저히 증가된 것을 알 수 있었다(P<0.05). Asparagine, threonine, serine, methionine, leucine의 경우 phytase를 500 unit 첨가한 구가 높은 소화율을 나타내었다(P<0.05). 한편 lysine, histidine, arginine 등의 다른 아미노산은 처리구가 대조구보다 약간의 소화율 증가를 보였으나 통계적 유의차는 나타나지 않았다(P>0.05). 결론적으로 인분해효소 phytase를 사료내 첨가하므로서 분중 영양소를 줄일 수 있는 환경친화성 사료를 개발 가능하다고 사료된다. 체결홈이 형성된 체결부를 갖는 안경집과 이것에 결합되는 체결구가 마련되어 개폐되는 커버가 형성된 케이스로 구성된다.로 금형설계 및 제작기간을 단축하고자 한다.ere demonstrated in rats after i.c.v., intraperitoneally and orally administration, respectively. The antiepileptical effects by the combination of compounds from ginseng; were compared with the iuluence of Rg1, Rb1, Rc and with the well known antiepileptical drugs such as carbamazepine, valproic acid. The base for the research is obtained by using the WAG/Rij strain (Luijtelaar, Coenen, Kuznetcova), an excellent genetic model for human generalized absence epilepsy. The improving action of gensinosides was effectively demonstrated on the model of electrical kindling of amygdala of WAG/Rij rats with genetically determined absences, and the influences of ginsenosides on the slow wave discharges have also been being investigated. The different characteristics of a kindling process exerted in the sex-dif