• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.5
• /
• pp.587-592
• /
• 1999

The combined effects of radius ratio and roughness pitch ratio on the turbulent fluid flow characteristics of the fully developed flow in the annullar tubes with rib-roughened core walls were determined for Reynolds number ranging from 12,000 to 66,000. To understand the underlying physical phenomena responsible for friction factor enhancement, measurements of velocity profiles and zero shear stress and maximum velocity positions were combined to propose the friction factor correlation. Friction factors were found to be a function of the roughness pitch ratio and radius ratio.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.8
• /
• pp.1-6
• /
• 2011

In this paper, another analytical approach for dual-hop amplify-and-forward(AF) relay systems is proposed over Rayleigh fading channels. Previous approaches derived the moment generating function(MGF) by using the cumulative distribution function(CDF) or probability density function(PDF) of the received signal-to-noise ratio(SNR) for source-relay-destination(S-R-D) link. Then, the average symbol error rate is expressed based on derived MGFs. In this paper, another new approach is proposed. It means that the MGF is directly derived by utilizing PDFs of both source-relay(S-R) and relay-destination(R-D) links. Additionary, the newly derived MGF is compared and analyzed with previous ones. Furthermore, simulation results are presented to validate the accuracy of proposed analytical expression. Based on this, it is confirmed that the proposed analytical approach can be a another solution for dual-hop AF relay systems.

• Clinical and Experimental Pediatrics
• /
• v.58 no.6
• /
• pp.218-223
• /
• 2015

Purpose: Idiopathic scoliosis is a structural lateral curvature of the spine of unknown etiology. The relationship between degree of spine curvature and cardiopulmonary function has not yet been investigated. The purpose of this study was to determine the association between scoliosis and cardiopulmonary characteristics. Methods: Ninety children who underwent preoperative pulmonary or cardiac evaluation at a single spine institution over 41 months were included. They were divided into the thoracic-dominant scoliosis (group A, n=78) and lumbar-dominant scoliosis (group B, n=12) groups. Scoliosis severity was evaluated using the Cobb method. In each group, relationships between Cobb angles and cardiopulmonary markers such as forced vital capacity (FVC), forced expiratory volume in one second ($FEV_1$), $FEV_1$/FVC, left ventricular ejection fraction, pulmonary artery flow velocity, and tissue Doppler velocities (E/E', E'/A') were analyzed by correlation analysis linear regression. Results: In group A, 72 patients (92.3%) underwent pulmonary function tests (PFTs), and 41 (52.6%) underwent echocardiography. In group B, 9 patients (75.0%) underwent PFT and 8 (66.7%) underwent echocardiography. Cobb angles showed a significant negative correlation with FVC and $FEV_1$ in group A (both P<0.05), but no such correlation in group B, and a significant negative correlation with mitral E/A ratio (P<0.05) and tissue Doppler E'/A' (P<0.05) in group A, with a positive correlation with mitral E/A ratio (P<0.05) in group B. Conclusion: Pulmonary and cardiac function was significantly correlated with the degree of scoliosis in patients with thoracic-dominant scoliosis. Myocardial diastolic function might be impaired in patients with the most severe scoliosis.

• Korean Journal of Clinical Pharmacy
• /
• v.34 no.2
• /
• pp.118-125
• /
• 2024

Background: Numerous studies have consistently demonstrated that depression can be associated with cognitive function decline, primarily focusing on older adults due to the neurodegenerative characteristics of dementia. With persistent depression frequently reported in patients with early-onset or young-onset dementia, this study aimed to assess the impact of depression, specifically the changes in depressive symptoms over time, on the risk of cognitive function decline in middle-aged adults in Korea. Methods: This retrospective study utilized data from the first four waves (2006-2012) of the Korean Longitudinal Study of Aging (KLoSA), focusing on middle-aged adults with normal cognitive function at baseline. Changes in depressive symptoms were categorized into four groups based on the CES-D score, and their association with cognitive function decline was evaluated using a multivariate logistic regression model. Results: Of the initial 10,254 participants, 3,400 were included in the analysis. Depressive status, particularly newly onset (adjusted odds ratio [aOR] 1.96; 95% confidence interval [CI] 1.32-2.93) and persistent depression groups (aOR 5.59; 95% CI 2.90-10.78), were significantly associated with cognitive function decline. In contrast, recovery from depressive symptoms was not significantly associated with cognitive function decline (p=0.809). Conclusions: Our study showed a significant association between changes in depressive symptoms and cognitive function decline in middle-aged Korean adults. This suggests that management of depressive symptoms could be crucial for the prevention of cognitive function decline in this population.

• Geomechanics and Engineering
• /
• v.22 no.4
• /
• pp.339-348
• /
• 2020

The uncertain geotechnical properties of frozen soil are important evidence for the design, operation and maintenance of the frozen ground. The complex geological, environmental and physical effects can lead to the spatial variations of the frozen soil, and the uncertain mechanical properties are the key factors for the uncertain analysis of frozen soil engineering. In this study, the elastic modulus, strength and Poisson ratio of warm frozen soil were measured, and the statistical characteristics under different temperature conditions are obtained. The autocorrelation distance (ACD) and autocorrelation function (ACF) of uncertain mechanical properties are estimated by random field (RF) method. The results show that the mean elastic modulus and mean strength decrease with the increase of temperature while the mean Poisson ratio increases with the increase of temperature. The average values of the ACD for the elastic modulus, strength and Poisson ratio are 0.64m, 0.53m and 0.48m, respectively. The standard deviation of the ACD for the elastic modulus, strength and Poisson ratio are 0.03m, 0.07m and 0.03m, respectively. The ACFs of elastic modulus, strength and Poisson ratio decrease with the increase of ratio of local average distance and scale of fluctuation. The ACF of uncertain mechanical properties is different when the temperature is different. This study can improve our understanding of the spatial autocorrelation variations of uncertain geotechnical properties and provide a basis and reference for the uncertain settlement analysis of frozen soil foundation.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.239-244
• /
• 1999

Radial immersion ratio is an important factor to determine the threshold in face milling and should be estimated in process for automatic force regulation. In this paper, presented is a method of on-line estimation of radial immersion ratio using cutting force. When a tooth finishes sweeping, sudden drop of cutting forces occurs. These force drops are equal to the cutting forces that act on a single tooth at the swept angle of cut and can be acquired from cutting force signals in feed and cross-feed directions. The ratio of cutting forces in feed and cross-feed directions acting on the single tooth at the swept angle of cut is a function of the swept angle of cut and the ratio of radial to tangential cutting force. In the research, it is found that the ratio of radial to tangential cutting force is not affected by cutting conditions and axial rake angle. Therefore, the ratio of radial to tangential cutting force determined by just one preliminary experiment can be used regardless of the cutting conditions. Using the measured cutting forces and predetermined ratio, the redial immersion ratio is estimated. various experiments show that the radial immersion ratio can be estimated by the proposed method very well.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.553-558
• /
• 2001

To find the effective combinations of blowing ratio and injection angle for a straight slot film cooling, film cooling characteristics was investigated using both flow visualization experiment and numerical simulation. Injection angles from $15^{\circ}\;to\;50^{\circ}$ and blowing ratios from 0.2 to 3.0 were selected for the simulation. Comparison between experimental and numerical results shows a good agreement, for the case of the injection angle of $30^{\circ}$ and blowing ratio ranging from 0.55 to 2.0. Film cooling effectiveness was found to be an increasing function of blowing ratio. The effects of injection angle became prominent as the blowing ratio increases. An interesting phenomenon was found for the injection angle of $15^{\circ}$ : the lowest film cooling effectiveness for the blowing ratio smaller than 1.0, but the highest film cooling effectiveness for the blowing ratio greater than 2.0 within wide range of downstream region. There exist optimum injection angles corresponding to maximum film cooling effectiveness : injection angle of $25^{\circ}$ for the blowing ratio from 0.2 to 2.0, and injection angle of $15^{\circ}$ for the blowing ratio of 3.0. Present study provides a design combination among film cooling effectiveness, blowing ratio, and injection angle.

• Tunnel and Underground Space
• /
• v.28 no.1
• /
• pp.59-71
• /
• 2018

Since the generalized Hoek-Brown (GHB) function predicts the strength of the jointed rock mass in a systematic manner by use of GSI index, it is widely used in rock engineering practices. In this study, a series of 2D elasto-plastic FE analysis, which adopts the GHB criterion as a yield function, was carried out to investigate the radial convergence characteristics of circular tunnel excavated in the GHB rock mass. The effect of the plastic potential function on the elasto-plastic displacement was also examined. In the analysis, the wide range of both the $K(={\sigma}_h/{\sigma}_v)$ and GSI values are considered. For each K value, the variation of the ratio of sidewall displacement to roof displacement was calculated with varying GSI values and the obtained displacement patterns were analysed. The calculation results show that the displacement ratio significantly depends not only on the K value but also on the range of GSI value. In particular, for lower range of GSI value, the displacement ratio pattern calculated in the elasto-plastic regime is opposite to that predicted by the elasticity theory. In addition, the variation of the radial displacement ratio with GSI value for different types of plastic potential function showed similar trend.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.21 no.2
• /
• pp.55-65
• /
• 2015

Purpose: Korea is increasing in the demand for medical services due to rapid economic growth and population aging in modern society. Thus, the importance has been emphasized for the health promotion in the community and the publicity and substantiality of public health centers. However, the environment is insufficient, compared to required functions and developed services as a urban public health center. The purpose of this study is to analysis the plane type and area composition of public health centers in Busan and to identify the property of their spatial configuration Methods: Eight public health centers in Busan, were classified, which had been selected as a medical tourism city. Subsequently, space requirements were analyzed, facilities were typed, vertical, horizontal spaces were reviewed, and area ratios by business function were calculated. Results: A review of the property of spatial configuration and an analysis of the area ratio revealed the three findings. 1)The horizontal analysis found various types: a single type, a multi-type, a radial type, and a circular type, 2)The vertical analysis showed that since a care function (general practice), and a task function (maternal and child health) were concentrated in lower level spaces, the lobby and core were closed located for providing quick medical services. 3)The analysis of the area ratio in public health centers in terms of their function indicated that each public health center' programs had the greatest influence on the area. Implications: This study attempted to present spatial structural problems and improvements for city public health center by identifying their state and classify their functions and types and by calculating the ratio of their area configuration according to the spatial composition. It was thus aimed to presenting implications in establish public functions and roles by activating business through in connection with the number of municipalities in many ways, such as regional health. medical welfare, etc. to improve the health of local residents, and by providing differentiated programs in accordance with local characteristics.

• The Journal of Korean Physical Therapy
• /
• v.25 no.6
• /
• pp.374-378
• /
• 2013

Purpose: Human body have biological rhythmic pattern in a day, which is affected by internal and external environmental factors. We investigated whether respiratory function was fluctuated according to the influence of time-of-day (around at 9 am, 1 pm, and 6 pm) in health subjects, using pulmonary function test (PFT). Methods: Eighteen healthy volunteers (8 men, mean ages; $22.4{\pm}1.6$, mean heights; $166.61{\pm}9.60$, mean weight; $59.3{\pm}10.3$) were recruited. Pulmonary function test (PFT) was measured at three time points in day, around 9 am, 1 pm, and 6 pm in calm research room with condition of under 55dB noise level, using a spirometer (Vmax 229, SensorMecis, USA). Forced vital capacity (FVC), forced expiratory volume at one second (FEV1), FVC/FEV1, and peak expiratory flow (PEF) were acquired. Results: In comparison of raw value of PFT among three time points, subjects showed generally better respiratory function at 9 am, than at other points, although no significance was found. In comparison of distribution of ranking for respiratory function in each individual, only PEF showed significant difference. In general, distributional ratio of subjects who showed best performance of respiratory function in a day was high. Conclusion: These findings showed that circadian rhythm by diurnal pattern was not detected on respiratory function throughout all day. But, best performance on respiratory function was observed mostly in the morning, although statistical significance did not exist.