• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 컴퓨터소사이어티 추계학술대회논문집
• /
• pp.243-246
• /
• 2003

In this paper, we propose a new digital audio watermarking technique with the wavelet transform. The watermark is embedded by eliminating unnecessary information of audio signal based on human auditory system (HAS). This algorithm is an audio watermarking method, which does not require any original audio information in watermark extraction process. In this paper, the masking effect is used for audio watermarking, that is, post-tempera] masking effect. We construct the window with the synchronization signal and we extract the best frame in the window by using the zero-crossing rate (ZCR) and the energy of the audio signal. The watermark may be extracted by using the correlation of the watermark signal and the portion of the frame. Experimental results show good robustness against MPEG1-layer3 compression and other common signal processing manipulations. All the attacks are made after the D/A/D conversion.

• 수산해양교육연구
• /
• 제25권2호
• /
• pp.341-348
• /
• 2013

The auditory thresholds for 7 specimens of the sharp toothed eel Muraensox cinerus were measured at 5 frequencies by heartbeat conditioning method using pure tones coupled with a delayed electric shock. The audible range of the sharp toothed eel extended from 80Hz to 300Hz with the best sensitivity around 80Hz and 100Hz. In addition, the auditory thresholds over 200Hz increased rapidly. The mean auditory thresholds of the sharp toothed eel at the test frequencies of 80Hz, 100Hz, 200Hz and 300Hz were 87dB, 86dB, 105dB and 126dB, respectively. Auditory masking was determined for the sharp toothed eel by using masking stimuli with the spectrum level range of about 70~80dB (0dB re $1{\mu}Pa/\sqrt{Hz}$). According to white noise level, the auditory thresholds increased as compared with thresholds in a quiet background noise. The noise spectrum level at the start of masking was distributed at the range of about 64dB within 80~100Hz. Critical ratio ranged from minimum 24dB to maximum 40dB at test frequencies of 80Hz~200Hz.

• 융합신호처리학회논문지
• /
• 제2권4호
• /
• pp.53-58
• /
• 2001

이동전화망을 위한 신뢰성 높은 객관적 통화품질평가 척도개발을 위하여 Bark Spectral Distortion Perceptual Speech Quality Measure의 성능을 분석하여 이 척도들을 실제 환경에서 수집된 음성 데이터에 대해서 실험한 결과, 성능의 저하가 나타났다. 본 논문에서는 인간의 심리음향학적 특성인 마스킹을 적용하는 방안을 제안하여 그 유효성을 실험으로 확인하였다. 이때, masking threshold 계산에 tone 신호를 사용하기 때문에 음성신호에 대하여 계산할 경우 문제점이 있을 수 있으므로 scaling 을 적용하는 새로이 제안하였다. 디지털 이동통신망에서 수집된 음성 데이터에 대한 성능평가 결과, 기존의 척도들 보다 더 높은 성능을 보임을 확인하였다.

• 정보처리학회논문지B
• /
• 제11B권2호
• /
• pp.125-132
• /
• 2004

본 논문에서는 DCT 변환 영역에서 인간 시각의 민감도에 따른 워터마크의 삽입과 원 DCT 계수의 왜곡을 최소화시키는 워터마크의 삽입방법을 제안한다. 제안한 방법은 JPEG 영상 압축에 적합한 인간 시각 시스템에 따라 블록을 재정렬하여 인간 시각에 둔감한 블록에 보다 강한 워터마크를 삽입시킨다. 또한 블록 내에서는 원 DCT 계수의 왜곡을 최소화시키는 워터마크를 삽입함으로서 높은 압축율에서도 비가시성과 견고성을 향상시킨다. 실험을 통하여 제안한 방법이 기존의 워터마킹 방법과 비교하여 높은 화질을 유지하면서 높은 압축율 에서도 견고성이 우수함을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.421-426
• /
• 2009

This paper presents vibration analysis of maskless exposure module in Printed Circuit Board (PCB) manufacturing system. In order to complete exposure process in PCB, masking type module has been widely used in electronics industries. However, masking process confronts some limitations of application due to higher production cost for masking as well as lower printing resolution. Therefore, maskless exposure module is started to be in the spotlight for flexible production system to meet the needs of fabrication in variable patterns at low cost. Since maskless exposure process adopts direct patterning to PCB, vibration problems become more critical compared to conventional masking type process. Moreover, movements of exposure engine as well as stage generate vibration sources in the system. Thus, it is imperative to analyze the vibration characteristics for the maskless exposure module to improve the quality and accuracy of PCB. In this study, vibration analysis using the Finite Element Analysis is conducted to identify the critical structural parts deteriorating vibration performance. Also, Experimental investigations are conducted by single/dual encoder measurement process under the operating module speed. Measurement points of vibration are selected by three places, which are base of stage, exposure engine and top of stage, to check the effect of vibration from the exposure engine. Comparisons between analysis results and experimental measurement are conducted to confirm the accuracy of analysis results including the developed FE model. Finally, this studies show feasibility of optimal design using the developed FE analysis model.

• 한국소음진동공학회논문집
• /
• 제19권12호
• /
• pp.1322-1328
• /
• 2009

This paper presents vibration analysis of maskless exposure module in printed circuit board(PCB) manufacturing system. In order to complete exposure process in PCB, masking type module has been widely used in electronics industries. However, masking process confronts some limitations of application due to higher production cost for masking as well as lower printing resolution. Therefore, maskless exposure module is started to be in the spotlight for flexible production system to meet the needs of fabrication in variable patterns at low cost. Since maskless exposure process adopts direct patterning to PCB, vibration problems become more critical compared to conventional masking type process. Moreover, movements of exposure engine as well as stage generate vibration sources in the system. Thus, it is imperative to analyze the vibration characteristics for the maskless exposure module to improve the quality and accuracy of PCB. In this study, vibration analysis using the finite element analysis is conducted to identify the critical structural parts deteriorating vibration performance. Also, Experimental investigations are conducted by single/dual encoder measurement process under the operating module speed. Measurement points of vibration are selected by three places, which are base of stage, exposure engine and top of stage, to check the effect of vibration from the exposure engine. Comparisons between analysis results and experimental measurement are conducted to confirm the accuracy of analysis results including the developed FE model. Finally, this studies show feasibility of optimal design using the developed FE analysis model.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.25-28
• /
• 2006

We propose a new method of masking cloud-affected pixels in satellite ocean color imageries such as of GLI. Those pixels, mostly found around cloud pixels or in scattered cloud area, have anomalous features in either in chlorophyll-a estimate or in water reflectance. This artifact is most likely caused by residual error of inter-band registration correction. Our method is to check the pixel-wise 'soundness' of the spectral water reflectance Rw retrieved after the atmospheric correction. First, we define two spectral ratio between water reflectance, IRR1 and IRR2, each defined as RW(B1)/RW (B3) RW (B3) and as RW (B2)/RW(B4) respectively, where $B1{\sim}B4$ stand for 4 consecutive visible bands. We show that an almost linear relation holds over log-scaled IRR1 and IRR2 for shipmeasured RW data of SeaBAM in situ data set and for GLI cloud-free Level 2 sub-scenes. The method we propose is to utilize this nature, identifying those pixels that show significant discrepancy from that relationship. We apply this method to ADEOS-II/GLI ocean color data to evaluate the performance over Level-2 data, which includes different water types such as case 1, turbid case 2 and coccolithophore bloom waters.

• 정보보호학회논문지
• /
• 제33권5호
• /
• pp.761-773
• /
• 2023

본 논문에서는 딥러닝 분야에서 사용되는 신경망 모델, 그중에서도 다중 계층 퍼셉트론 모델에 사용되는 지수함수 기반의 활성화 함수를 근사 함수로 대체하고, 근사 함수에 마스킹을 적용함으로써 신경망 모델의 추론 과정의 전력 분석 저항성을 높이는 방법을 제안한다. 이미 학습된 값을 사용하여 연산하는 인공 신경망의 추론 과정은 그 특성상 가중치나 편향 등의 내부 정보가 부채널 공격에 노출될 위험성이 있다. 다만 신경망 모델의 활성화 함수 계층에서는 매우 다양한 함수를 사용하고, 특히 지수함수 기반의 활성화 함수에는 마스킹 기법 등 통상적인 부채널 대응기법을 적용하기가 어렵다. 따라서 본 연구에서는 지수함수 기반의 활성화 함수를 단순한 형태로 근사하여도 모델의 치명적인 성능 저하가 일어나지 않음을 보이고, 근사 함수에 마스킹을 적용함으로써 전력 분석으로부터 안전한 순방향 신경망 모델을 제안하고자 한다.

• Communications for Statistical Applications and Methods
• /
• 제1권1호
• /
• pp.33-40
• /
• 1994

The conditional expectation of a random variable in a multivariate normal random vector is a multiple linear regression on its predecessors. Using this fact, the least median of squares estimation method developed in a multiple linear regression is adapted to a multivariate data to identify influential observations. The resulting method clearly detect outliers and it avoids the masking effect.

• 정보보호학회논문지
• /
• 제30권1호
• /
• pp.1-15
• /
• 2020

화이트 박스 암호에 대한 부채널 분석 맥락의 공격인 차분 계산 분석(Differential computation analysis, DCA) 공격이 제안됨에 따라, 이에 대응하기 위해 Lee 등의 대응기법과 같이 테이블 인코딩 기반 마스킹 화이트 박스 암호가 제안되었다. 마스킹 화이트 박스 암호에 대한 기존 고차 DCA는 테이블 인코딩 기반의 마스킹 구현 구조를 고려하지 못하여 Lee 등이 제안한 대응 기술에는 적용이 불가능하였다. 본 논문에서는 테이블 인코딩 기반 마스킹 구현에도 적용할 수 있는 새로운 고차 DCA 기법을 제안하고, Lee 등이 제안한 마스킹 화이트 박스 암호의 비밀키 정보를 실제로 찾음으로써 그 유효성을 증명하였다.