• Journal of KIISE
• /
• v.43 no.11
• /
• pp.1233-1244
• /
• 2016

In the IoT network environments for LLNs(Low power and Lossy networks), IPv6 Routing Protocol for Low Power and Lossy networks(RPL) has been proposed by IETF(Internet Engineering Task Force). The goal of RPL is to create a directed acyclic graph, without loops. As recommended by the IETF standard, RPL route recovery mechanisms in the event of a failure of a node should avoid loop, loop detection, DIO Poisoning. In this process, route recovery time and control message might be increased in the sub-tree because of the repeated route search. In this paper, we suggested RPL route recovery method to solve the routing overhead problem in the sub-tree during a loss of a link in the RPL routing protocol based on IoT wireless networks. The proposed method improved local repair process by utilizing a route that could not be selected as the preferred existing parents. This reduced the traffic control packet, especially in the disconnected node's sub tree. It also resulted in a quick recovery. Our simulation results showed that the proposed RPL local repair reduced the recovery time and the traffic of control packets of RPL. According to our experiment results, the proposed method improved the recovery performance of RPL.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.310-318
• /
• 2018

Recently, the importance of big data analysis is increasing as a large amount of data is generated by various devices connected to the Internet with the advent of Internet of Things (IoT). Especially, it is necessary to analyze various large-scale IoT streaming sensor data generated in real time and provide various services through new meaningful prediction. This paper proposes a real-time indoor PM10 concentration prediction LSTM model based on streaming data generated from IoT sensor using AWS. We also construct a real-time indoor PM10 concentration prediction service based on the proposed model. Data used in the paper is streaming data collected from the PM10 IoT sensor for 24 hours. This time series data is converted into sequence data consisting of 30 consecutive values from time series data for use as input data of LSTM. The LSTM model is learned through a sliding window process of moving to the immediately adjacent dataset. In order to improve the performance of the model, incremental learning method is applied to the streaming data collected every 24 hours. The linear regression and recurrent neural networks (RNN) models are compared to evaluate the performance of LSTM model. Experimental results show that the proposed LSTM prediction model has 700% improvement over linear regression and 140% improvement over RNN model for its performance level.

• Journal of KIISE
• /
• v.43 no.4
• /
• pp.460-469
• /
• 2016

Internet of Things (IoT) is an environment where various devices are connected to each other via a wired/wireless network and where the devices gather, process, exchange, and share information. Some of the most important types of IoT devices are mobile IoT devices such as smartphones. These devices provide various high-performance services to users but cannot be supplied with power all the time; therefore, power management appropriate to a given IoT environment is necessary. Power management of mobile IoT devices involves complex relationships between various entities such as application processors (APs), HW modules inside/outside AP, Operating System (OS), platforms, and applications; a method is therefore needed to systematically analyze and manage these relationships. In addition, variabilities related to power management such as various policies, operational environments, and algorithms need to be analyzed and applied to power management development. In this paper, engineering principles and a method based on them are presented in order to address these challenges and support systematic development of IoT device power management. Power management of connected helmet systems was used to validate the feasibility of the proposed method.

• Journal of Digital Contents Society
• /
• v.12 no.4
• /
• pp.429-436
• /
• 2011

Various documents, images, videos and other materials on the web has been increasing rapidly. Efficient search of those things has become an important topic. From keyword-based search, internet search has been transformed to semantic search which finds the implications and the relations between data elements. Many annotation processing systems manipulating the metadata for semantic search have been proposed. However, annotation data generated by different methods and forms are difficult to process integrated search between those systems. In this study, in order to resolve this problem, we categorized levels of many annotation documents, and we proposed the method to measure the similarity between the annotation documents. Similarity measure between annotation documents can be used for searching similar or related documents, images, and videos regardless of the forms of the source data.

• Convergence Security Journal
• /
• v.23 no.1
• /
• pp.45-54
• /
• 2023

Recently, with the development of the Internet of Things, research on protocols that can easily connect devices without a UI to the network has been steadily conducted. To this end, the Wi-Fi Alliance announced Wi-Fi Easy Connect, which can connect to a network using a QR code. However, since Wi-Fi Easy Connect requires a large amount of computation for safety, it is difficult to apply to low-power and miniaturized IoT devices. In addition, Wi-Fi Easy Connect considering scalability is designed to operate in a wired environment, but problems such as duplicate encryption occur because it does not consider a security environment like TLS. Therefore, in this paper, we analyze the Wi-Fi Easy Connect protocol and propose a protocol that can operate efficiently in the TLS environment. It was confirmed that the proposed protocol satisfies the existing security requirements and at the same time reduces about 67% of ECC scalar multiplication operations with a large amount of computation.

• The Journal of Bigdata
• /
• v.8 no.1
• /
• pp.1-10
• /
• 2023

This paper presents the design process of an agricultural data sharing platform intended to address major challenges faced by the domestic agricultural industry. The platform was designed with a user interface that prioritizes user requirements for ease of use and offers various analysis techniques to provide growth prediction for field environment, growth, management, and control data. Additionally, the platform supports File to DB and DB to DB linkage methods to ensure seamless linkage between the platform and farmhouses. The UI design process utilized HTML/CSS-based languages, JavaScript, and React to provide a comprehensive user experience from platform login to data upload, analysis, and detailed inquiry visualization. The study is expected to contribute to the development of Korean smart farm models and provide reliable data sets to agricultural industry sites and researchers.

• Journal of Platform Technology
• /
• v.9 no.4
• /
• pp.79-89
• /
• 2021

In this paper, the fine dust (PM10) and ultrafine dust (PM2.5) measurement platforms are designed to be mobile and fixed using oneM2M, the international standard for IoT. The fine dust measurement platform is composed and designed with a fine dust measurement device, agent, oneM2M platform, oneM2M IPE, and monitoring system. The main difference between mobile and fixed is that the mobile uses the MQTT protocol for interconnection between devices and services without blind spots based on LTE connection, and the fixed uses the LoRaWAN protocol with low power and wide communication range. Not only fine dust, but also temperature, humidity, atmospheric pressure, volatile organic compounds (VOC), carbon monoxide (CO), sulfur dioxide (SO2), nitrogen dioxide (NO2), and noise data related to daily life were collected. The collected sensor values were managed using the common API provided by oneM2M through the agent and oneM2M IPE, and it was designed into four resource types: AE and container. Six functions of operability, flexibility, convenience, safety, reusability, and scalability were analyzed through the fine dust measurement platform design.

• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.151-159
• /
• 2010

Currently, by using the Internet, We can do varius things such as Web surfing, email, on-line shopping, stock trading on your home or office. However, as being out of the concept of security from the beginning, it is the big social issues that malicious user intrudes into the system through the network, on purpose to steal personal information or to paralyze system. In addition, network intrusion by ordinary people using network attack tools is bringing about big worries, so that the need for effective and powerful intrusion detection system becomes very important issue in our Internet environment. However, it is very difficult to prevent this attack perfectly. In this paper we proposed the algorithm for the detection of DoS attacks, and developed attack detection tools. Through learning in a normal state on Step 1, we calculate thresholds, the number of packets that are coming to each port, the median and the average utilization of each port on Step 2. And we propose values to determine how to attack detection on Step 3. By programing proposed attack detection algorithm and by testing the results, we can see that the difference between the median of packet mounts for unit interval and the average utilization of each port number is effective in detecting attacks. Also, without the need to look into the network data, we can easily be implemented by only using the number of packets to detect attacks.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.1-5
• /
• 2015

Recently, RF energy harvesting technology is a promising technology for small-size IoT(Internet of Things) devices such as sensor to resolve battery scarcity problem. When applied to existing cognitive radio networks, this technology can be expected to increase network throughput through the increase of cognitive user's operating time. This paper proposes a optimal channel-selection policy for RF energy harvesting CR networks model where cognitive users in harvesting zone harvest ambient RF energy from transmission by nearby active primary users and the others in non-harvesting zone choose the channel and communicate with their receiver. We consider that primary users and secondary users are distributed as Poisson point processes and contact with their intended receivers at fixed distances. Finally we can derive the optimal frame duration, transmission power and density of secondary user from the proposed model that can maximize the secondary users's throughput under the given several conditions and suggest future directions of research.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.2
• /
• pp.173-178
• /
• 2019

Recently, the types and amount of data generated, collected, and measured in IoT such as smart home, security, and factory are increasing. The technologies for IoT service include sensor devices to measure desired data, embedded software to control the devices such as signal processing, wireless network protocol to transmit and receive the measured data, and big data and AI-based analysis. In this paper, we focused on developing a gateway for interfacing heterogeneous sensor network protocols that are used in various IoT devices and propose a heterogeneous network interface IoT gateway. We utilized a OpenWrt-based wireless routers and used 6LoWAN stack for IP-based communication via BLE and IEEE 802.15.4 adapters. We developed a software to convert Z-Wave and LoRa packets into IP packet using our Python-based middleware. We expect the IoT gateway to be used as an effective device for collecting IoT big data.