본 연구에서는 평가도구의 구비조건을 갖춘 초등학교 고학년 학생의 과학탐구능력을 측정할 수 있는 과학탐구 능력 평가도구를 개발하고자 하였다. 평가도구를 구성하는 문항은 R&D 방법에 의해 개발되었으며, 2차례에 걸친 과학교육 전문가의 점검과 2번의 현장 검증을 통해 문항을 수정 보완하였다. 각 평가 문항은 교과 내용에 대한 지식이 없어도 해결할 수 있는 범교과적인 문항으로 제작하여 과학탐구능력의 하위 요소들을 측정하고자 하였다. SAPA 교육과정과 제7차 과학과 교육과정에서 제시한 과학탐구과정 요소를 근간으로 관찰, 분류, 측정, 예상, 추리,문제인식, 변인통제,자료해석,결론도출,실험설계의 10가지 하위 요소들을 선정하고 각 요소에 대한 조작적 정의와 평가 목표를 설정하였다. 물질과 에너지, 생명과 환경, 지구와 순환의 3가지 내용 영역의 소재를 중심으로 총 30문항을 개발하였다. 개발된 문항을 과학교육 전문가에게 2회 의뢰하여 타당도, 객관도, 문항의 명료성을 점검 받았으며 2번의 현장 검증을 통해 신뢰도, 변별도, 난이도를 검증하였다. 그 결과 타당도 91.6%, 신뢰도 지수 Cronbach ${\alpha}$-값 0.79, 객관도 93.3%, 변별도 지수 0.30, 난이도 지수 66.1%로 나타났다. 위와 같은 값들은 평가도구가 갖추어야 할 구비조건의 허용 범위내에 있는 것으로 보아 본 연구에서 개발한 과학탐구능력 평가도구는 양호한 것으로 볼 수 있다. 따라서 본 연구에서 개발한 과학탐구능력 평가도구는 초등학생들의 과학탐구능력 성취 수준의 진단, 과학과 교육과정과 교수 학습 자료 및 과학과 교수 학습 방법의 과학탐구능력 반영 수준을 평가하는 도구로도 이용될 수도 있을 것이다.
2015 개정 수학과 교육과정에서 강조하는 역량이 제대로 구현되기 위해서는 교과서의 역할이 매우 중요하다. 본 연구에서는 초등학교 5-6학년 수학 교과서에 수학 교과 역량이 어떻게 반영되어 있는지 분석하였다. 연구 결과, 교과서에는 의사소통을 강조하는 활동 및 문항의 비율이 가장 높았고 추론, 문제 해결, 창의·융합, 태도 및 실천, 정보 처리의 순으로 드러났다. 또한 역량별 하위 요소를 분석한 결과 특정 하위 요소가 강조되어 각 역량이 구현되었음을 알 수 있으며, 교과 역량 및 교과 역량의 하위 요소의 구현이 서로 관련되어 이루어진다는 것을 발견할 수 있다. 본 연구를 통하여 교과서를 통하여 교과 역량의 실행에 대한 시사점을 제공할 수 있기를 기대한다.
본 연구의 목적은 2002년도부터 2011년도까지 10년간의 가정과 '임용시험 문항'(이하 '총 문항'이라 칭함)을 대상으로 분야별 출제 비율 분석, 평가 내용 요소(이하 '평가 요소'라고 칭함)에 따른 문항 분석, 임용 상세화 기준 개발 이전과 이후의 분야별 평가 내용 요소를 분석하는데 있다. 연구 결과를 요약하면 다음과 같다. 첫째, 가정과교육학 분야의 분석 결과 총 문항 중 30.9%의 비중을 차지했으며, 최근에는 35%의 출제 비율을 보이고 있다. 평가 요소별 출제 비율을 보면 '가정과 교수 학습 방법의 실제'(33.2%)가 가장 높았으며, '가정과교육의 본질'(3.2%)은 가장 낮았다. 둘째, 식생활 분야의 분석 결과 총 문항 중 17.5%의 비중을 차지했으며, 최근에는 15%의 출제 비율을 보이고 있다. 평가 요소별 출제 비율을 보면 '조리원리 실습'(26.1%)이 가장 높았으며, '식생활 문화'(3.7%)는 가장 낮았다. 셋째, 의생활의 분야의 분석 결과, 총 문항 중 15%의 비중을 차지했으며 최근에는 12.5%의 출제 비율을 보이고 있다. 평가 요소별 출제비율을 보면 '의복 관리'(25.1%)와 '의복 및 생활용품 제작'(25.1%)이 가장 높았으며, '의복의 선택과 자기표현'(3.0%)은 가장 낮았다. 넷째, 주생활 분야의 분석 결과, 총 문항 중 11%의 비중을 차지했으며 최근에는 12.5%의 출제 비율을 보이고 있다. 평가 요소별로는 '주거생활문화의 이해'(22.5%)가 가장 높고, '주거실내디자인의 이해'(10.7%)는 가장 낮았다. 다섯째, 소비생활 분야의 분석 결과, 총 문항 중 12.4%의 비중을 차지했고, 최근에는 12.5%의 출제 비율을 보이고 있다. 평가 요소별 출제 비율을 보면 '가정자원관리'(34%)가 가장 높았으며, '생애설계와 가정복지'(0%)에서는 전혀 출제되지 않았다. 여섯째, 가족생활 분야의 분석 결과 총 문항 중 13.3%의 비중을 차지했고, 최근에는 12.5%의 출제 비율을 보이고 있다. 평가 요소별 출제 비율은 '가족에 대한 이해와 가족의 변화'(23.8%)가 가장 높았고, '결혼과 가족발달'(2%)은 가장 낮았다. 마지막으로, 전반적으로 임용 상세화 기준의 개발은 가정과 중등 임용 시험의 평가 영역별 내용 요소의 균등화와 다양화의 문제를 다소 완화하였다.
The purpose of this study is to analyze and interpret the ponds appeared in the Korean traditional temples. Summarized findings are as follows: First, it appeared that the location of ponds of the Korean traditional temples is, in general, in both the entry space and transitional space of temple. And it is considered that such configurations of the location of ponds were done intentionally in order that the ponds should have a significance as same as the concept that a natural mountain stream separates the sacred place and the secular world. Second, since the size of the ponds appeared in the temples are considered to be what is transformed from the original one, it is hard to understand the real size. However, it is judged that since ponds we see at present played an element of the total space of a temple it is deemed that no significant change of the size of ponds have happened if the size of the structure a temple itself has ever changed. Third, it appeared that the forms of the temple's ponds are diversified in a square, oval, egg-shaped one, round shape(circle), natural shape, etc. and it is identified that most of the ponds inspected for this study appeared to be in shapes of an oval, egg-shaped one, and round shape which take a typical curve. Fourth, regarding the temples whose origins are from the Baekje dynasty or Shilla dynasty among the objects of this case study, there appear some uniform styles for each temple respectively. For example, in both the Junglim Temple's twin pond(定林寺 雙池) and the Mireuk Temple's twin pond(彌勒寺 雙池) which were built in the Baekje dynasty appears a twin-pond in a square shape, and in the Bulkuk temple(佛國寺), Haein temple(海印寺), Tongdo temple(通度寺), etc. which were built in the Silla dynasty appears the ponds in an egg-shape one. Fifth, regarding the function of the ponds appeared in the temples, the ponds are characterized with a lotus pond(蓮池), reflecting pond(影池), and pond complex(蓮 . 影池). In consideration of the 20 ponds in the 15 places of this study's object, there are 8 lotus ponds(蓮池), 6 reflecting ponds(影池), and 6 ponds complex(蓮 . 影池).
One of the methods that are used to compare and verify the supporting performance of the spacer grids developed is the vibration characteristic test. A modal test in this paper is performed for a dummy rod 3,847 mm tall supported by eight New Doublet (ND) spacer grids. For the vibration test in air, nine accelerometers, one displacement sensor and one shaker are used for acquiring signals, and an I-DEAS TDAS software Is employed for analyzing the signals. Also, a finite element (FE) analysis is performed by a beam-spring simple model and a contact model simulating the contact phenomenon between the rod and the ND spring. And then, the results of the modal testing are compared with those of the FE analysis. The natural frequencies as well as the mode shapes obtained by the experiment have a greater similarity to the results by the contact model than the previous beam-spring model. In audition, for grasping whether or not the modal parameters are influenced by where shaking spot is, two kinds of tests are performed : one is for the shaker attached at the fourth span (center), the other is for the shaker at the fifth span that is one span nearer to the bottom of the rod. The latter shows higher MAC than the former Finally, the vibration displacements are measured in the range of 0.l12∼0.214 mm for the excitation force of 0.25∼0.75 N.
One of the methods that are used to compare and verify the supporting performance of the spacer grids developed is the vibration characteristic test. A modal test in this paper is performed for a dummy rod 3,847mm tall supported by eight New Doublet (ND) spacer grids. For the vibration test in air, nine accelerometers, one displacement sensor and one shaker are used for acquiring signals, and an I-DEAS TDAS software is employed for analyzing the signals. Also, a finite element (FE) analysis is performed by a beam-spring simple model and a contact model simulating the contact phenomenon between the rod and the fm spring. And then, the result of the FE analysis is compared with that of the modal test. The natural frequencies as well as the mode shapes calculated by the proposed contact models have a greater similarity to the test results than those by the previous beam-spring model. In addition, for grasping whether or not the modal parameters are influenced by where shaking spot is, two kinds of tests are performed; one is for the shaker attached at the fourth span (center), the other is for the shaker at the fifth span that is one span nearer to the bottom of the rod. The latter shows higher MAC than the former. Finally, the vibration displacements are measured in the range of 0.112-0.214mm for the excitation force of 0.25-0.75 N.
The study analyzed the heat losses and the building energy efficiency grade by the energy simulation using the ENERGY# and ECO2 programs for the three types of Standard design of rural houses. It was calculated the energy efficiency rating by the ECO2 program for the rural housing standard design, and the energy demand and the energy consumption by each factor were compared and analyzed. And it analyzed energy consumption by element of each house by ENERGY # program. As a result, first in the evaluation of the energy efficiency grade of buildings by the ECO2 program, the rating for primary energy requirement for the housing newly built by the standard design of rural house is expected to range from 2 to 4 with 189.3 to $238.7kWh/m^2.a$. Second, the energy loss of each part of standard design of rural housing occurs in the order of ventilation 39%, window 33%, outer wall 14%, roof 9%, bottom 5%, and energy loss through ventilation and window occurs more than 70%. Third, the most beneficial effects on the energy efficiency grade is obtained the lowest grade of all three types by 2 when the lowering of the window and door heat transmission rate and the lowering of the light density, and the heat exchange ventilation device is not installed. Fourth, in the standard design of rural housing, the energy demand is occupied by heating > hot water > lighting order, and the order of the weight is changed in order of heating > lighting > ventilation > hot water. Fifth, building energy efficiency assessment system needs to establish policy for fixing rural housing energy as a practical device to ensure energy performance and quality.
In this study, the structural deflection analysis of robot manipulator for removing nuclear fuel rod from nuclear reactor vessel is performed by using general purpose finite element code (ANSYS). The structural deflection analysis results reported in this study is very required for the accurate design of robot system. The structural deflection analysis for the manipulator's structural status at which the gripper grasps and draws up the nuclear fuel rod is done, For this beginning structural status of robot manipulator's removing motion, the reaction forces at each joint have static maximum values as reported in the reference(6), and so these forces may cause the maximum deflection of robot structure. The structural deflection analysis is performed for selected four working cases of the proposed structural model and results on deformation, stress for the manipulator's solid body and the deflection at the end of robot manipulator's gripper are calculated. And further, the same analysis is performed for the slenderer manipulator with cross section reduced by one-fifth of each side length of proposed model. The analysis is performed not only for the nuclear fuel rod with weight load of 300kg but also for nuclear fuel rods with weight loads of 100kg, 200kg, 400kg and 500kg. The static structural deflection analysis results show that the deflection value increases as the load increases and the largest value (corresponding to the weight load of 500kg in case 1) is much smaller than the gap distance between nuclear fuel rods. but the largest value for the slenderer manipulator is almost as large as the gap distance, Hence, conclusively, the proposed manipulator's structural model is acceptably safe for mechanical design of robot system.
This study examined that the black dress is the one of having aesthetic value as well as symbolism while delivering specific image, from the perspective of color, which is essential element in forming design of the Stage Costume. This study carried out the theoretical research of centering on the literature consideration and the empirical research of centering on a case side by side. It analyzed the works and design based on the clothing, which had been performed in Korea with a revival version of Musical 'Chicago'. Aesthetic characteristics in more than two are being shown in one dress. If so, the following are the results that considered on aesthetics characteristics in black, which were shown in Stage Costume of Musical 'Chicago', which is increasing the theme consciousness through Stage Costume, which is simple and sexy black. First, as emotion of coming to stay in agony and sadness on the basic fact called death, the Stage Costume in black led to being shown sorrow of implying death, fear and murder. Second, the dignity, which corresponds to noble beauty in the aesthetic category, expresses dignity and elegance with flat material in black, and is revealed the aspect of expressing fashion, which emphasized spirit rather than body. Third, as the aesthetic characteristic of causing sexual desire, the sensuality was shown, which has the aspect of being expressed through exposure, concealment and emphasis. Fourth, it was expressed with androgyny, which evokes androgynous image. Fifth, black in Musical 'Chicago' formed the whole mood with a sense of weight by arranging the whole feeling with color in similar tone, thereby having been indicated the harmony of being formed with theme, which is aimed to be indicated in drama.
This study aimed to develop fashion designs by applying the PO (Provocative Operation) method as a 3D virtual clothing program and to derive the PO application method in fashion design. The first T-shirt design was presented as an existing thinking method, and the second design was developed by applying escape, reversal, exaggeration, distortion, and hopeful thinking techniques, which are techniques for 'provocation' of the PO method, to the first design. Thus, 18 T-shirt designs were developed as 3D virtual clothing, with 3 sets of 6 designs, including the 1st and 2nd designs. The method of using the 'provocation' techniques of the PO method in the development of fashion design derived from this was as follows. First, the 'escape' technique was designed in such a way that a part of the detail or structure was deleted, or a part of the structure or expression element of another item was applied. Second, the 'inversion' technique was expressed by inverting the position or shape of a detail or structure up, down, left, and right; fitting the structural detail or reversing the shape; or converting the structure and form. Third, the 'exaggeration' technique exaggerated the size, length, and volume of a structure's form or detail. Fourth, the 'distortion' technique was expressed as a distortion of lines or shapes or a visual distortion using the Trompe l'oeil technique. Fifth, the 'hopeful thinking' technique was developed and expressed from the idea of an hypothetical 'if' it was absurd, irrational, and unrealistic.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.