• Wind and Structures
• /
• 제18권2호
• /
• pp.117-134
• /
• 2014

It is believed that offshore wind farms may satisfy an increasing portion of the energy demand in the next years. This paper presents a comparative study of the fatigue performances of tripod and jacket steel support structures for offshore wind turbines in waters of intermediate depth (20-50 m). A reference site at a water depth of 45 m in the North Atlantic Ocean is considered. The tripod and jacket support structures are conceived according to typical current design. The fatigue behavior is assessed in the time domain under combined stochastic wind and wave loading and the results are compared in terms of a lifetime damage equivalent load.

• 환경영향평가
• /
• 제15권3호
• /
• pp.193-206
• /
• 2006

Recently, high ozone episode occurred frequently in Korea. Moreover ozone episode occurred not only in the city but also in background area where local anthropogenic sources are not important. It analyzed frequency exceeding 100ppb ozone at air quality monitoring stations in Seoul and rural area during 1995-2004. This paper reports on the use of the Community Multiscale Air Quality (CMAQ) modelling system to predict hourly ozone levels. Domain resolutions of 30km, 10km, 3.333km (innermost) have been employed for this study. Summer periods in June 2004 have been simulated and the predicted results have been compared to data for metropolitan and rural air quality monitoring stations. The model performance has been evaluated with measured data through a range of statistical measures. Although, the CMAQ model reproduces the ozone temporal spatial trends it was not able to simulate the peak magnitudes consistently.

• Environmental Analysis Health and Toxicology
• /
• 제17권1호
• /
• pp.73-80
• /
• 2002

Pyruvate dehydrogenase phosphatase (PDP)와 kinase는 당대사시 해당과정에서의 대사 산물인 pyruvate를 acetyl CoA로 만들어 구연산 회로로 진입시켜 주는 효소인 pyruvate dehydrogenase complex (PDC)의 활성을 조절하는 중요한 효소이다. PDP의 catalytic subunit는 PDC의 dihydrolipoamide acetyltransferase (E2), PDP regulatory subunit (PDPr), 그리고 칼슘 결합 도메인 등으로 구성되어 있는 것으로 추측되어지고 있다. 본 연구에서는 그 구조와 기능과의 상관관계를 알아보기 위해 PDPc를 E. coli JM101에서 발현시켜 순수 정제 후 단백분해 효소를 이용한 제한적 가수분해 방법을 이용해 그 구조와 기능과의 상관관계에 대해 연구하고자 하였다 정제된 PDPc는 trypsin, chymotrypsin, Arg-C 그리고 elastase를 이용하여 3$0^{\circ}C$ 그리고 pH 7.0에서 제한적으로 분해시켰으며 각 분해산물의 아미노 말단의 아미노산 배열을 분석하였다. 그 결과 PDPc는 trypsin, chymotrypsin, elastase에 의해 N-terminal의 50 kD과 C-terminal의 10 kD의 두개의 분해산물을 만들었으며, Arg-C에 의해 50kD의 분해산물은 약 35kD와 15kD으로 더 가수분해가 되었다. 이러한 결과로 볼 때 PDPc는 앞에서 추측한데로 세개의 주요한 기능적 도메인으로 이루어져 있음을 알 수 있었다 또한 C-terminal의 10kD은 PDPc의 활성에는 영향을 주지 않는 것으로 밝혀졌으나 다른 도메인의 기능은 더 연구가 되어져야 할 것으로 생각된다.

• 한국환경교육학회지:환경교육
• /
• 제21권4호
• /
• pp.79-93
• /
• 2008

The purpose of this study was to develop an instrument for measuring elementary school students' environmental literacy. The process of instrument development was four phases. The first two phases involved defining the domain of the construct, writing an initial pool of 55 items, and reviewing the items for revision and deletion. These steps were taken to provide the evidence of content-related validity, and to reduce a number of items. The third phase was, through item analysis, to determine the most appropriate items for the environmental literacy for the elementary school students. For the forth phases, the fifth and sixth students in elementary school participated in this survey. To examine the reliability and validity of environmental literacy for the elementary school students, internal consistency estimate, and factor analysis were used. The results of this study were summarized as follows; Firstly, thorough factor analysis, we developed Environmental Literacy Instrument for the elementary school students, consisted of total 41 items (knowledge 8 items, emotion 11 items, skill 10 items, and behavior 13 items); Secondly, Cronbach's alpha was .783 for knowledge, .832 for emotion, .866 for skill and 8.61 for behavior.

• Wind and Structures
• /
• 제31권5호
• /
• pp.403-418
• /
• 2020

To investigate the effects of central buckles on the dynamic behavior and flutter stability of long-span suspension bridges, four different connection options between the main cable and the girder near the mid-span position of the Aizhai Bridge were studied. Based on the flutter derivatives obtained from wind tunnel tests, formulations of self-excited forces in the time domain were obtained using a nonlinear least square fitting method and a time-domain flutter analysis was realized. Subsequently, the influences of the central buckles on the critical flutter velocity, flutter frequency, and three-dimensional flutter states of the bridge were investigated. The results show that the central buckles can significantly increase the frequency of the longitudinal floating mode of the bridge and have greater influence on the frequencies of the asymmetric lateral bending mode and asymmetric torsion mode than on that of the symmetric ones. As such, the central buckles have small impact on the critical flutter velocity due to that the flutter mode of the Aizhai Bridge was essentially the symmetric torsion mode coupled with the symmetric vertical mode. However, the central buckles have certain impact on the flutter mode and the three-dimensional flutter states of the bridge. In addition, it is found that the phenomenon of complex beat vibrations (called intermittent flutter phenomenon) appeared in the flutter state of the bridge when the structural damping is 0 or very low.

• 한국해양공학회지
• /
• 제32권5호
• /
• pp.333-340
• /
• 2018

This paper addresses the concept of the representative mean position, which was devised to improve the numerical efficiency of a time domain fatigue analysis of a mooring chain. To investigate the influence of an artificial offset of the floater on the fatigue of the mooring chain, a parametric study was performed on the moored FPSO under various combinations of offsets and environmental conditions. Tension time histories were calculated using the de-coupled analysis method, and fatigue damages were calculated to determine the influence of the offset. The parametric study was extended to a more realistic case to determine the actual effect of the representative mean position, where a comparison was made between the two different analysis results, one using the representative mean position and the other one using the actual mean position. It was confirmed that the application of the representative mean position guaranteed the conservatism of the fatigue damage with the enhanced numerical efficiency in the time domain fatigue analysis.

• Steel and Composite Structures
• /
• 제28권4호
• /
• pp.509-516
• /
• 2018

The differential quadrature (DQ) and teaching-learning based optimization (TLBO) methods are coupled to introduce a hybrid numerical method for maximizing fundamental natural frequency of laminated composite skew plates. The fiber(s) orientations are selected as design variable(s). The first-order shear deformation theory (FSDT) is used to obtain the governing equations of the plate. The equations of motion and the related boundary conditions are discretized in space domain by employing the DQ method. The discretized equations are transferred from the time domain into the frequency domain to obtain the fundamental natural frequency. Then, the DQ solution is coupled with the TLBO method to find the maximum frequency of the plate and its related optimum stacking sequences of the laminate. Convergence and applicability of the proposed method are shown and the optimum fundamental frequency parameter of the plates with different skew angle, boundary conditions, number of layers and aspect ratio are obtained. The obtained results can be used as a benchmark for further studies.

• 한국멀티미디어학회논문지
• /
• 제10권6호
• /
• pp.754-759
• /
• 2007

Methodology of ontology building based on Web resources will not only reduce significantly the ontology construction period, but also enhance the quality of the ontology. Remarkable progress has been achieved in this regard, but they encounter similar difficulties, such as the Web data extraction and knowledge acquisition. This paper researches on the characteristics of ontology construction data, including dynamics, largeness, variation and openness and other features, and the fundamental issue of ontology construction - formalized representation method. Then, the key technologies used in and the difficulties with ontology construction are summarized. A software Model-OntoMaker (Ontology Maker) is designed. The model is innovative in two regards: (1) the improvement of generality: the meta learning machine will dynamically pick appropriate ontology learning methodologies for data of different domains, thus optimizing the results; (2) the merged processing of (semi-) structural and non-structural data. In addition, as known to all wetland researchers, information sharing is vital to wetland exploitation and protection, while wetland ontology construction is the basic task for information sharing. OntoMaker constructs the wetland ontologies, and the model in this work can also be referred to other environmental domains.

• Bulletin of the Korean Chemical Society
• /
• 제28권2호
• /
• pp.207-210
• /
• 2007

To identify structural or functional common subunit(s) in the CP1 (editing) domains of class Ia tRNA synthetases, five available structures were compared and analyzed. Through the sequence alignments and structural overlapping of the CP1 domains, three conserved regions were identified near the amino acid binding site in the editing domain. Structural overlapping of the three subunits clearly showed the existence of three common structural subunits in all of the five editing RS structures. Based on the established experimental results and our modeling results, it is proposed that subunits 1 and 3 accommodate the incoming amino acid binding, while subunit 2 contributes to the interactions with the adenosine ring of the A76 to stabilize the overall tRNA binding. Since these subunits are critical for the editing reaction, we expect that these key structures should be conserved through the most class Ia editing RSs.

• 대한토목학회논문집
• /
• 제12권4호
• /
• pp.33-47
• /
• 1992

본 논문에서는 케이블로 지지된 프리스트레스트 콘크리트(PC) 뼈대의 시공중의 각 단계를 고려하고 콘크리트와 PC 강재, 케이블 재료의 시간의존적 특성 및 재료의 비선형성과 케이블의 색 및 구조물의 처짐에 의한 기하학적 비선형성도 고려하는 해석방법을 제시했다. 구조물의 비선형거동을 해석하기 위한 운동방정식은 Updated Lagrangian 방식을 이용하여 유도하고 시간의존적인 거동올 해석하기 위해서 시간영역을 시간단계로 나누어 순차적으로 적분했다. 시공중의 각 단계를 표현하기 위해 계속적인 구조계의 변화를 고려했다. 본 논문에서 제시한 해석방법에 근거하여 컴퓨터 프로그램 CFRAME을 개발하고 예제들을 통하여 해석방법의 정당성을 보였다.