• Journal of Oral Medicine and Pain
• /
• v.33 no.3
• /
• pp.257-267
• /
• 2008

The mentophysical disease causes diseases in digestive, respiratory, circulating systems, including chronic pain, through combined reactions from different individual characteristics, mental stress and temperamental factors. The most common symptom related to orofacial area is pain and the contributive factors include biological, behavioral, environmental, social, emotional, recognitive factors. These factors affect the course of the symptom according to individual's character and human nature. In pain, sleep acts as a contributive factor, and pain could bring about sleep disturbance and vice versa. Deterioration of sleep quality would act as a factor that aggravates mental stress. Therefore, relatively accurate and simple mental examinations and sleep quality test should be carried out for the patients with symptoms related to orofacial area. This study evaluated the mental state in relation to the sleep quality which could affect orofacial pain. The number of poor sleeper was 18 in male subjects, and 1 in female subjects and PSQI global index was higher in male($6.11{\pm}2.38$) than female($4.67{\pm}2.18$). SCL-90-R index showed no sex difference. Poor sleeper showed significantly high value in SOM, O-C, I-S, ANX, PHOB, PSY, GSI, PST. When SCL-90-R T scores were compared according to sleep quality, higher the subjective sleep quality score, O-C and I-S showed significant increase. As sleep disturbances score increased, PAR, PSY, PST showed statistically significant increase. In comparison of SCL-90-R T score according to daytime dysfunction, statistically significant increase in DEP, ANX, HOS, PHOB, PAR, GSI was observed. Therefore, the quality of sleep and psychological status have a high correlation. This is likely to influence chronic pain in the orofacial field. As a result, clinicians treating orofacial pain should evaluate the sleep quality and psychological status of the patient. Further studies of larger sample sizes including various age, occupation, and pain groups are necessary in order to apply the results to clinical practice.

• Korean Journal of Remote Sensing
• /
• v.31 no.5
• /
• pp.449-459
• /
• 2015

The conventional National Forest Inventory(NFI)-based forest carbon stock estimation method is suitable for national-scale estimation, but is not for regional-scale estimation due to the lack of NFI plots. In this study, for the purpose of regional-scale carbon stock estimation, we created grid-based forest carbon stock maps using spatial ancillary data and two types of up-scaling methods. Chungnam province was chosen to represent the study area and for which the $5^{th}$ NFI (2006~2009) data was collected. The first method (method 1) selects forest type map as ancillary data and uses regression model for forest carbon stock estimation, whereas the second method (method 2) uses satellite imagery and k-Nearest Neighbor(k-NN) algorithm. Additionally, in order to consider uncertainty effects, the final AGB carbon stock maps were generated by performing 200 iterative processes with Monte Carlo simulation. As a result, compared to the NFI-based estimation(21,136,911 tonC), the total carbon stock was over-estimated by method 1(22,948,151 tonC), but was under-estimated by method 2(19,750,315 tonC). In the paired T-test with 186 independent data, the average carbon stock estimation by the NFI-based method was statistically different from method2(p<0.01), but was not different from method1(p>0.01). In particular, by means of Monte Carlo simulation, it was found that the smoothing effect of k-NN algorithm and mis-registration error between NFI plots and satellite image can lead to large uncertainty in carbon stock estimation. Although method 1 was found suitable for carbon stock estimation of forest stands that feature heterogeneous trees in Korea, satellite-based method is still in demand to provide periodic estimates of un-investigated, large forest area. In these respects, future work will focus on spatial and temporal extent of study area and robust carbon stock estimation with various satellite images and estimation methods.

• Journal of Animal Science and Technology
• /
• v.53 no.4
• /
• pp.283-288
• /
• 2011

This study was conducted to study the environment effects on live weight, carcass weight, dressing percentage, eye muscle area, backfat thickness, and marbling score, which are the carcass traits of Hanwoo, based on the estimates and all the possible regression for the selection of variable and significance test for 231,382 heads that underwent the carcass measurements. The average and standard deviation for the live weight, carcass weight, dressing percentage, eye muscle area, backfat thickness, and marbling score were 654.79${\pm}$91.61 kg, 362.30${\pm}$67.15 kg, 59.52${\pm}$0.03%, 81.79${\pm}$12.21 $cm^2$, 11.39${\pm}$5.40 mm, 4.38${\pm}$2.29, respectively. The live weight, carcass weight, dressing percentage, eye muscle area, backfat thickness, and marbling score for cow were 532.79${\pm}$78.38 kg, 313.40${\pm}$44.90 kg, 56.50${\pm}$0.03%, 75.24${\pm}$10.69 $cm^2$, 11.82${\pm}$5.10 mm, 4.30${\pm}$2.06, respectively, while for bull were 619.74${\pm}$93.27 kg, 376.89${\pm}$48.62 kg, 58.61${\pm}$0.02%, 85.61${\pm}$10.46 $cm^2$, 5.64${\pm}$2.71 mm, 1.41${\pm}$0.83, respectively, and for steer were 681.78${\pm}$70.72 kg, 415.23${\pm}$49.43 kg, 60.19${\pm}$0.02%, 88.29${\pm}$10.27 $cm^2$, 12.71${\pm}$5.23 mm, 5.42${\pm}$1.99, respectively. In the environmental variables selection based on the variables selection method, the examination by carcass traits suggested that the most appropriate model could be determined when five variables were selected for the live weight, carcass weight, dressing percentage, eye muscle area, and four variables for backfat thickness, and marbling score. When they were considered at a time altogether based on multiple traits, it was deemed to be desirable to insert all five variables into the variables for analysis. In addition, high significance was found by carcass traits.

• Management & Information Systems Review
• /
• v.37 no.3
• /
• pp.1-25
• /
• 2018

This research performed the empirical test for the effects of learning transfer on perceived usefulness, perceived ease of use, self-efficacy and work environment using 390 employees who have experienced e-learning in domestic and foreign companies. Analyzed the mediating effects of self-efficacy and work environment in addition to direct effect of each factor on learning transfer. The results showed that perceived usefulness and perceived ease-of-use of e-learning learner had a positive(＋) effect on self-efficacy and a positive influence on supervisor and peer support and organizational climate. Self-efficacy showed a positive effect on learning transfer, and supervisor support, peer support and organizational climate had a positive influence on learning transfer as well. Perceived usefulness also had a positive effect on learning transfer. However, perceived ease-of-use had no significant effect on learning transfer. As a result of the mediating effect analysis, self-efficacy and work environment were analyzed to have mediating effects between perceived usefulness, perceived ease of use, and learning transfer. The implications of this study are as follows. First, this study designed a new research model that reflects factors influencing the effect of learning transfer on acceptance of e-learning that is common in corporate education. It has derived a research model of perceived usefulness and perceived ease-of-use, which were used as mediating variables for external characteristics factors, as independent variables, using self-efficacy and work environment as mediating variables, which were studied as external factors. Second, most of the studies on technology acceptance model and learning transfer are conducted in a single country. The reliability was enhanced by testing the study models using different samples from 26 countries. Third, perceived usefulness and ease-of-use in existing studies have been considered as key determinants of acceptance intention and learning transfer. This study explored the mediating effects of learner and environmental factors on the accepted information technology and strengthened and supplemented the path of learning transfer of perceived usefulness and ease-of-use. In addition, based on the sample analysis of various countries used in this study, it is expected that future international comparative studies will be possible.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.1
• /
• pp.59-67
• /
• 1995

Blood lead assay by $D_2$ lamp background correction method of atomic absorption spectrophotometer(AAS) with wavelength of 283.3 nm is most popular in occupational health practice in Korea. On the other hand, $D_2$ lamp background correction method with wavelength of 217.0 nm is also often used in general chemical analysis for lead assay in general purpose. But both methods have some weakness of background correction which brought direct effect on the results of analysis. Recently blood lead assay with polarized Zeeman effect of AAS was introduced and is now preferred in many laboratory than $D_2$ correction method in blood lead analysis. But still AAS with $D_2$ lamp are widely used in the field of occupational health in Korea. This study compared blood lead assay data with $D_2$ correction methods(283.3 and 217.0 nm) and with that of polarized Zeeman effect correction method to evaluate the validity of 02 correction methods. The results obtained were as follows; 1. Taking the value of polarized Zeeman effect method as reference value of 1.00, the mean relative value of $D_2$ correction method with wavelength of 217.0 nm was 0.92 and that with wavelength of 283.3 nm was 0.90 respectively in the analysis of blood lead whose value were below $20.0{\mu}g/dl$(p<0.001). Both mean values were statistically smaller than polarized Zeeman effect correction method. But in the analysis of blood whose value were between 20.0 to $20.0{\mu}g/dl$, the mean relative value of $D_2$ correction method was 0.96 in both wavelength and did not differ from polarized Zeeman effect method(p<0.001). There was no difference of blood lead between $D_2$ correction method and polarized Zeeman effect method in the analysis of blood lead whose value were over $40.0{\mu}g/dl$. 2. The variations of background correction value in polarized Zeeman effect method were not changed by increase of blood lead, but those in $D_2$ correction methods were increased by the increase of blood lead. While then relative standard deviation(RSD) of data measured by Zeeman effect method were decreased by the increase of blood lead, those by $D_2$ methods were nol differed by the increase of blood lead.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.3
• /
• pp.241-252
• /
• 2016

In this paper, in order to test the possibility of applying K feldspar $pIR-IRSL_{290}$ signal(read out at $290^{\circ}C$) to date old terrace sediments(up to ~ 200 ka, MIS 7) in Korea, we investigated luminescence properties of $pIR-IRSL_{290}$ signals in K feldspar extracts from 27 marine and fluvial terrace sediment samples, and these were compared with those of quartz OSL and conventional K feldspar $IRSL_{50}$ (readout at $50^{\circ}C$) signals. The averaged $2D_0$ value of K feldspar $pIR-IRSL_{290}$ growth curves was ~ 700 Gy, which is consistent with that of $IRSL_{50}$ signal, and this is 3 times higher than that for quartz OSL (~ 250 Gy) on average. Where possible, K feldspar $pIR-IRSL_{290}$ ages were compared with quartz OSL and conventional $IRSL_{50}$ ages. Our preliminary K feldspar $pIR-IRSL_{290}$ ages were older than quartz OSL ages by about 200%, while fading rate-corrected conventional $IRSL_{50}$ ages are in good agreement with those based on quartz OSL. This seems to indicate the possibility of K-feldspar $pIR-IRSL_{290}$ age overestimation due to the presence of unbleachable $pIR-IRSL_{290}$ signals, even with a prolonged exposure to sunlight. Both quartz OSL and K-feldspar $pIR-IRSL_{290}$ signals for the samples from Noeum fluvial terrace and Gusan fault site were all in dose saturation level, thus unable to estimate the formation ages of the sediments. However, $2D_0$ values derived from the dose response growth curves strongly indicate that the Noeum fluvial terrace sediments have formed before 109-140 ka, while the fluvial sediments from Gusan fault were desposited before 100-105 ka. Further, this seems to suggest that the previous quartz OSL ages of ~40-50 ka for Gusan fault sediments should be the underestimated ones due to dose saturation problem.

• Korean Journal of Ecology and Environment
• /
• v.56 no.1
• /
• pp.45-56
• /
• 2023

In stream ecosystem assessment, RIVPACS, which makes a simple but clear evaluation based on macroinvertebrate community, is widely used. In this study, a preliminary study was conducted to develop a RIVPACS-type model suitable for Korean streams nationwide. Reference streams were classified into two types(upstream and downstream), and a prediction model for macroinvertebrates was developed based on each family. A model for upstream was divided into 7 (train): 3 (test), and that for downstream was made using a leave-one-out method. Variables for the models were selected by non-metric multidimensional scaling, and seven variables were chosen, including elevation, slope, annual average temperature, stream width, forest ratio in land use, riffle ratio in hydrological characteristics, and boulder ratio in substrate composition. Stream order classified 3,224 sites as upstream and downstream, and community compositions of sites were predicted. The prediction was conducted for 30 macroinvertebrate families. Expected (E) and observed fauna (O) were compared using an ASPT biotic index, which is computed by dividing the BMWPK score into the number of families in a community. EQR values (i.e. O/E) for ASPT were used to assess stream condition. Lastly, we compared EQR to BMI, an index that is commonly used in the assessment. In the results, the average observed ASPT was 4.82 (±2.04 SD) and the expected one was 6.30 (±0.79 SD), and the expected ASPT was higher than the observed one. In the comparison between EQR and BMI index, EQR generally showed a higher value than the BMI index.

• Journal of Nutrition and Health
• /
• v.48 no.5
• /
• pp.407-418
• /
• 2015

Purpose: Given that the indicators related to chronic diseases are important to evaluating goals of the national health policy, the aim of this study was to develop dietary behavior items available in the Korea National Health and Nutrition Examination Survey. Methods: The dietary behavior items were developed based on the literature reviews, need assessment of the field, expert focus-group interviews, and expert advisory meeting. Questions for each dietary behavior item were developed by reflecting on environmental, personal, and behavior factors of the ecological frame and then revised through expert focus-group interview and expert advisory meeting. The understanding and reliability of the developed questionnaire were assessed by cognitive interview and test-retest reliability. Results: The developed items were sodium and salt intake, added and simple sugar intake, enough time to consume a meal for all ages, caffeine drinks and fresh/healthy food intake for children and adolescents, and limited dietary intake, fresh/healthy food intake for seniors. In most questions except some questions on sodium and salt intake, subjects understood over 70% and consistency of responses based on the kappa values was acceptable. Conclusion: Developed dietary behavior items are expected to be useful for evidence-based nutrition policy, interventions and research targeting dietary patterns through investigating and monitoring dietary behavior patterns.

• Journal of Korean Society of Transportation
• /
• v.19 no.4
• /
• pp.35-47
• /
• 2001

Traffic represents one of the largest sources of primary air pollutants in urban area. As a consequence. numerous abatement strategies are being pursued to decrease the ambient concentration of pollutants. A characteristic of most of the these strategies is a requirement for accurate data on both the quantity and spatial distribution of emissions to air in the form of an atmospheric emission inventory database. In the case of traffic pollution, such an inventory must be compiled using activity statistics and emission factors for vehicle types. The majority of inventories are compiled using passive data from either surveys or transportation models and by their very nature tend to be out-of-date by the time they are compiled. The study of current trends are towards integrating urban traffic control systems and assessments of the environmental effects of motor vehicles. In this study, a methodology of motor vehicle emission calculation by using real-time traffic data was studied. A methodology for estimating emissions of CO at a test area in Seoul. Traffic data, which are required on a street-by-street basis, is obtained from induction loops of traffic control system. It was calculated speed-related mass of CO emission from traffic tail pipe of data from traffic system, and parameters are considered, volume, composition, average velocity, link length. And, the result was compared with that of a method of emission calculation by VKT(Vehicle Kilometer Travelled) of vehicles of category.

• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.567-573
• /
• 2010

Research was initiated to investigate early establishment characteristics and germination pattern of fine-textured fescues (FF). Six varieties from Chewings fescue ($Festuca$ $rubra$ L. ssp. $commutata$ Gaud., CF), creeping red fescue ($F.$ $rubra$ L. ssp. $rubra$ Gaud., CRF), hard fescue ($F.$ $ovina$ ssp. $longifolia$ Thuill., HF) and sheep fescue ($F.$ $ovina$ L., SF) were evaluated in the study. An alternative environmental condition requiring a FF germination test by International Seed Testing Association (ISTA) was applied in the experiment, consisting of 8-hr light at $25^{\circ}C$ and 16-hr dark at $15^{\circ}C$ (ISTA conditions). Daily and cumulative germination patterns were measured and analyzed on a daily basis. Significant differences were observed in germination pattern, days to the first germination, days to 50% germination, days to 60% germination, and germination rate. The final germination percentage was variable with species and varieties, being 40.25 to 82.00% at the end of study. There were considerable variations in early germination characteristics and germination pattern among FF species. The first germination in all entries except HF was initiated between 5 and 6 DAS (days after seeding) under ISTA conditions, while HF between 6 and 7 DAS, being 1 day later. It was 8 to 10 DAS in days to the 50% germination, which was 2 to 4 days after the first germination date. Days to the 60% germination were 9.10 to 14.80 DAS under ISTA conditions, being 5.70 days in differences among the entries. CF 'Jamestown II' and 'Shadow II' and HF 'Aurora Gold' were the fast varieties. The slowest one was HF 'Rescue 911'. Among FF species, turf establishment speed was becoming faster in CRF, SF, HF and CF in this order. Information on differences in germination characteristics and pattern from this study would be usefully applied for golf course design and construction, when established with FF.