• Journal of Life Science
• /
• v.25 no.2
• /
• pp.136-150
• /
• 2015

Pseudomonas syringae pathovar tabaci is a plant pathogenic bacterium that causes wildfire disease in tobacco plants. In P. syringae pv. tabaci, PsyI, a LuxI-type protein, acts as an AHL synthase, while primary and secondary sequence analysis of PsyR has revealed that it is a homolog of the LuxR-type transcriptional regulator that responds to AHL molecules. In this study, using phenotypic and genetic analyses in P. syringae pv. tabaci, we show the effect of PsyR protein as a quorum-sensing (QS) transcriptional regulator. Regulatory effects of PsyR on swarming motility and production of siderophores, tabtoxin, and N-acyl homoserine lactones were examined via phenotypic assays, and confirmed by quantitative real-time reverse transcription-polymerase chain reaction (qRT-PCR). Further qRT-PCR showed that PsyR regulates expression of these virulence genes in response to environmental signals. However, an upstream region of the gene was not bound with purified MBP-PsyR protein; rather, PsyR was only able to shift the upstream region of psyI. These results suggested that PsyR may be indirectly controlled via intermediate-regulatory systems and that auto-regulation by PsyR does not occur.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.3C
• /
• pp.95-104
• /
• 2012

Due to current interest in creation of urban space and urban landscape, more emphasis has been placed on underground space development. With increasing number of underground power cables and its importance, a study of backfill materials for pipe is now imperative. Backfill materials require outstanding thermal characteristics since breakdown of cable insulation can be caused if heat generated from transmission of underground power cables had not been effectively discharged through backfill materials. Also, coal ash, which are industrial by-products, is being produced in high volume every year. Among them, ponded ash (PA) is not recycled and instead, mostly buried. Therefore in this study, thermal conductivity test based on mixture ratio (PA, ponded ash : FA, fly ash) was performed to evaluate the thermal conductivity characteristics of CLSM (controlled low strength materials) with coal ash. The results indicate that the mixture ratio (PA, ponded ash : FA, fly ash) of 80:20, water contents of 28~30%, and cement contents of 7-11% showed the highest conductivity at 0.796~0.884W/mK and thus, considered optimal in terms of recycling ponded ash (PA) as well as for maximizing utilization as backfill materials for pipe in underground.

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.264-271
• /
• 2023

In this study, ASCO^Ⓡ SLES-430 surfactant was synthesized by adducting 3 moles of ethylene oxide and 1 mole of propylene oxide to lauryl alcohol followed by a sulfation process, and the structure of the synthesized ASCO^Ⓡ SLES-430 was elucidated by performing FT-IR, ¹H-NMR and ¹³C-NMR analyses. Interfacial properties such as critical micelle concentration, static surface tension, emulsification index, and contact angle were measured, and environmental compatibility indices such as oral toxicity and skin irritation were also estimated for ASCO^Ⓡ SLES-430. Both results were compared with ASCO^Ⓡ SLES-226 and ASCO^Ⓡ SLES-328 SLES surfactants possessing 2 moles and 3 moles of ethylene oxide, respectively. In particular, both foaming ability and foam stability were evaluated for ASCO^Ⓡ SLES-430 and compared with ASCO^Ⓡ SLES-226 and ASCO^Ⓡ SLES-328, which have been widely used in detergent products, in order to test the potential applicability of ASCO^Ⓡ SLES-430 in detergent product formulation for a small capacity built-in washing machine.

• Journal of Animal Environmental Science
• /
• v.9 no.2
• /
• pp.93-102
• /
• 2003

This study designed and constructed an experimental column far adhesion efficiency test and conducted experiment to investigate the offensive odor adhesion efficiency of filter bed materials. The offensive odor adhesion experiment was conducted using mixture of high physical adhesion efficiency material, and the fixity of deodorization microorganism of selected filter bed material was tested using ammonia exclude microorganism A4-­2 and sulfur oxidation microorganism S5­-5.2 those were cultured at the Agricultural Chemical Department of Chungnam National University, and deodorization efficiency of selected filter bed material mixture was tested. Following are summary of these tests results. 1. Amount of elimination of the offensive odor gas of ammonia and hydrogen sulfide per unit volume was 0.054 and 0.016$\ell/\textrm{cm}^3$ in rice hull, 0.01 and 0.004 $\ell/\textrm{cm}^3$ in rice straw 0.158 and 0.01 $\ell/\textrm{cm}^3$ in coconut, 0.014 and 0.02$\ell/\textrm{cm}^3$ perlite, 0.004 and 0.003$\ell/\textrm{cm}^3$ in high road ball, and 0.112 and 0.015 $\ell/\textrm{cm}^3$ in chaff of pine, respectively. 2. Amount of elimination of offensive odor gas of ammonia and hydrogen sulfide per unit volume was 0.045 and 0.014$\ell/\textrm{cm}^3$ in mixture 1, 0.079 and 0.016$\ell/\textrm{cm}^3$ in mixture 2, 0.123 and 0.017 $\ell/\textrm{cm}^3$ in mixture 3, 0.031 and 0.015$\ell/\textrm{cm}^3$ in mixture 4, 0.055 and 0.016$\ell/\textrm{cm}^3$ in mixture 5, and 0.111 and 0.020$\ell/\textrm{cm}^3$ in mixture 6, respectively. 3. The offensive odor elimination microorganism inoculated to mixture of chaff of pine(70%) and perlite(30%) showed the elimination efficiency of 99.06% and 96.61% against the ammonia and hydrogen sulfide, respectively, during 24 hours period.

• Korean Journal of Environmental Biology
• /
• v.34 no.4
• /
• pp.353-360
• /
• 2016

Effect of heavy metals(Cd, Cu, Zn) on the survival and population growth rates(PGR) of marine rotifer, Brachionus plicatilis were examined. B. plicatilis were exposed to Cd, Cu and Zn for 24 h to determine their survival and 72 h to determine their PGR. Survival rates in the control groups were greater than 90%. They were decreased with increasing concentrations of Cd, Cu and Zn. Survival rates were reduced in a concentration-dependent manner. Significant reduction in survival rates after exposure to Cd, Cu and Zn at concentration greater than 40.00, 0.13 and $10.00mg\;L^{-1}$, respectively. PGR in the control groups were greater than 0.50. They were decreased with increasing concentrations of heavy metals. PGR were reduced in a concentration-dependent manner. Significant reduction in PGR after exposure to Cd, Cu and Zn occurred at concentration greater than 12.5, 0.06 and $1.00mg\;L^{-1}$, respectively. The order of heavy metal toxicity based on PGR was Cu>Zn>Cd, with $EC_{50}$ (50% Effective Concentration) values of 0.12, 6.15 and $21.41mg\;L^{-1}$, respectively. The lowest-observed-effective-concentrations(LOEC) of PGR after exposure to Cd, Cu and Zn were 12.50, 0.06 and $1.00mg\;L^{-1}$, respectively. The No-observed-effective-concentrations(NOEC) of PGR after exposure to Cd, Cu and Zn were 6.25, 0.03 and $0.01mg\;L^{-1}$, respectively, in marine ecosystems have toxic effects on PGR of B. plicatilis. These results suggest that the PGR of B. plicatilis are useful tool to assess the effect of heavy metals on primary consumers in marine natural ecosystems.

• Journal of Animal Environmental Science
• /
• v.16 no.1
• /
• pp.41-50
• /
• 2010

The goal of this study was to develop a suitable ventilation system for high-rise hog building (HRHB) for growing-fattening with combined slatted floor pen in second story and in situ manure management system in Korea. The HRHB was constructed as 29m long, 9m wide and 7.6m high for outer dimension with an indoor height of 3.1m and 2.4 for lower and upper floor, respectively. Ventilation systems for each treatment were installed in separated rooms of HRHB. The ventilation types installed in each room were following 3 types: ventilation type 1 (V1), where air was pulled through a circular duct inlet and exhausted by fans; ventilation type 2 (V2), where air was pulled through eave inlet (side ceiling inlet) and exhausted by fans; and ventilation type 3 (V3), where air was pulled through baffled ceiling inlet and exhausted by fans. For each ventilation system, investigated air velocity under minimum, medium and maximum ventilation ratio and air flow pattern inside. The results were as follows; For air flow pattern from top to bottom, V1 showed a homogeneous vertical type, V2 showed a bilateral symmetry type and V3 showed an vertical umbrella type. Under minimum ventilation ratio, air velocity in upper floor (80cm above the slated floor) was similar for V1, V2, and V3. Under maximum ventilation ratio, air velocity in upper floor was undeviating for V1 (0.10~0.26m/s) and varied for V2 (0.12~0.63m/s) while those for V3 was relatively slow and less varied (0.07~0.15m/s). In conclusion, Duct inlet type (V1) can be applied to the development of a new HRHB with additional evaluations such as field test hog feeding.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.4
• /
• pp.342-352
• /
• 2020

Objectives: The characteristics of research workers are different from those working in the manufacturing industry. Furthermore, the reagents used change according to the research due to the characteristics of the laboratory, and the amounts used vary. In addition, since the working time changes almost every day, it is difficult to adjust the time according to exposure standards. There are also difficulties in setting standards as in the manufacturing industry since laboratory environments and the types of experiments performed are all different. For these reasons, the measurement of the working environment of research workers is not realistically carried out within the legal framework, there is a concern that the accuracy of measurement results may be degraded, and there are difficulties in securing data. The exposure evaluation based on an eight-hour time-weighted average used for measuring the working environment to be studied in this study may not be appropriate, but it was judged and consequently applied as the most suitable method among the recognized test methods. Methods: The investigation of the use of chemical substances in the research laboratory, which is the subject of this study, was conducted in the order of carrying out work environment measurement, sample analysis, and result analysis. In the case of the use of chemical substances, after organizing the substances to be measured in the working environment, the research workers were asked to write down the status, frequency, and period of use. Work environment measurement and sample analysis were conducted by a recognized test method, and the results were compared with the exposure standards (TWA: time weighted average value) for chemical substances and physical factors. Results: For the substances subject to work environment measurement, the department of chemical engineering was the most exposed, followed by the department of chemistry. This can lead to exposure to a variety of chemicals in departmental laboratories that primarily deal with chemicals, including acetone, hydrogen peroxide, nitric acid, sodium hydroxide, and normal hexane. Hydrogen chloride was measured higher than the average level of domestic work environment measurements. This can suggest that researchers in research activities should also be managed within the work environment measurement system. As a result of a comparison between the professional science and technology service industry and the education service industry, which are the most similar business types to university research laboratories among the domestic work environment measurements provided by the Korea Safety and Health Agency, acetone, dichloromethane, hydrogen peroxide, sodium hydroxide, nitric acid, normal hexane, and hydrogen chloride are items that appear higher than the average level. This can also be expressed as a basis for supporting management within the work environment measurement system. Conclusions: In the case of research activity workers' work environment measurement and management, specific details can be presented as follows. When changing projects and research, work environment measurement is carried out, and work environment measurement targets and methods are determined by the measurement and analysis method determined by the Ministry of Employment and Labor. The measurement results and exposure standards apply exposure standards for chemical substances and physical factors by the Ministry of Employment and Labor. Implementation costs include safety management expenses and submission of improvement plans when exposure standards are exceeded. The results of this study were presented only for the measurement of the working environment among the minimum health management measures for research workers, but it is necessary to prepare a system to improve the level of safety and health.

• Korean Journal of Environmental Biology
• /
• v.21 no.1
• /
• pp.72-76
• /
• 2003

We investigated the effects of molting-hormone insecticide tebufenozide on fourth larvae of the midge C. flaviplumuon in growth development from fourth-instar to adult. Fourth-instar larvae were exposed test concentrations were chosen control, 10 $\mu\textrm{g}$$L^{-1}$, 30 $\mu\textrm{g}$$L^{-1}$, 60 $\mu\textrm{g}$$L^{-1}$ and 100$\mu\textrm{g}$$L^{-1}$. In control and 10 $\mu\textrm{g}$$L^{-1}$, 10~20% individuals succeed adults while low emergence rates were observed surplus 30 $\mu\textrm{g}$$L^{-1}$. Death larvae appeared a various day along the concentration. We observed the converged day: control, 10 $\mu\textrm{g}$$L^{-1}$, 30 $\mu\textrm{g}$$L^{-1}$ and 60~100 $\mu\textrm{g}$$L^{-1}$ were day 4 to day 18, day 13 to day 16, day 9 to day 17 and day 9 to day 15, respectively. Therefore we concerned a tendency that exposure concentration was high, death period was short. Also, due to molting hormone disruption, development of midge was postponed relatively low concentration such as 10 $\mu\textrm{g}$$L^{-1}$. The converged days of pupa stage revealed control, 10 $\mu\textrm{g}$$L^{-1}$, 30 $\mu\textrm{g}$$L^{-1}$ and 60~100$\mu\textrm{g}$$L^{-1}$ were day 11~15, day 16~20, day 9~15 and day 5~9, respectively. About 10% individuals grow up the pupa-stage in 60~100 $\mu\textrm{g}$$L^{-1}$ condition. Sex ratio of the emerged adults was not different in this study. Death pupae frequently appeared in day 13~16 in control, day 6~23 in 10 $\mu\textrm{g}$$L^{-1}$, day 13~16 in 30 $\mu\textrm{g}$$L^{-1}$ and day 6~16 in 60~100 $\mu\textrm{g}$$L^{-1}$.

• The Journal of Korean Society for School & Community Health Education
• /
• v.14 no.3
• /
• pp.27-40
• /
• 2013

Objectives: This study was conducted at a request for cooperation through an analysis of the effect of toothbrushing facilities at a public health center in Seongdong-gu. Also, with the aim of furnishing basic data to the proposal of a program for improving the ability of school aged children in managing oral cavities and developing a correct toothbrushing habit, the study conducted an investigation of how toothbrushing facilities affect change in the oral environment management ability and behavior of oral health care. Methods: From among elementary schools located in Seongdong-gu, Seoul the study selected A Elementary School where toothbrushing facilities were established and have been operated since 2008, B Elementary School in an adjacent region within the jurisdiction of Seongdong-gu where the demographic environment was similar among schools where toothbrushing facilities were newly established in 2012, and C Elementary School without toothbrushing facilities. Then the study was aimed at first grade students of the schools and an investigation was carried out from April to December 2012. Through a dental checkup, the study evaluated the teeth and periodontal health conditions, and a test of the oral environment management ability was undertaken three times. Regarding change of oral health care behavior, the study carried out a self-recording survey. Results: 1. Concerning decayed and filled tooth(dft) and decayed and filled surface (dfs), A Elementary School where toothbrushing facilities have been established and operated from the past showed a relatively lower decayed, missing, and filled teeth index than B Elementary School where toothbrushing facilities were established in 2012 or C Elementary School without toothbrushing facilities; however, there was no significant difference (p>0.05). For CPI, there was no significant difference by school; however, in looking into the difference between boy students and girl students, Code (0) was discovered higher in boy students whereas Code (1) was shown higher in girl students. 2. In the PHP index test in accordance with the existence of toothbrushing facilities before the installation of toothbrushing facilities, for A Elementary School where toothbrushing facilities have been established and operated from the past, the school recorded 4.28 points whereas B Elementary School where the facilities were established in 2012 recorded 3.51 points. Meanwhile C Elementary School without the facilities posted 4.30 points. Therefore there was a statistically significant difference according to the existence of toothbrushing facilities (p<0.05). 3. In a comparison of teeth health care behavior according to the existence of toothbrushing facilities, the number of answers that the respondent did not brush their teeth after lunch over the past one week was higher in B Elementary School and C Elementary School where there were no toothbrushing facilities. Regarding the average number of brushing after lunch for one week, it was discovered higher in A Elementary School (p<0.01). 4. In change of teeth health care behavior before and after the establishment of toothbrushing facilities, the case of answering that the respondents did not brush their teeth after lunch for one week increased more after establishment than before establishment. Also the average number of teeth brushings after lunch for one week decreased further after the establishment of toothbrushing facilities; however, it did not show a significant difference (p>0.05). One of the reasons that they do not brush their teeth, "the lack of a place", decreased significantly after establishment than before establishment (p<0.05), whereas the answer, "because their friends do not brush their tooth" increased greatly after establishment than before establishment; however, there was no significant difference (p>0.05). 5. In the comparison of the degree of knowledge about dental health according to the existence of toothbrushing facilities, the degree of knowledge about dental health was shown significantly higher in A Elementary School with toothbrushing facilities than in B Elementary School and C Elementary School where there were no toothbrushing facilities (p<0.01). Conclusions: Given the above results, it is difficult to attract change in behavior only with an environmental improvement; therefore, it is deemed necessary to develop an educational program that will help children to make a habit of oral health care not only through a school but also through a related policy and financial support of government organizations as well as the construction of the basis of a systematic and consistent cooperative system with relevant organizations.

• Journal of the Korean Society of School Health
• /
• v.12 no.2
• /
• pp.207-215
• /
• 1999

The objectives of this study are to explain the use of media materials in school health education with other related factors in elementary, middle, and high schools in Korea. The data were collected by questionnaires from June to September in 1998. The number of subjects were 294 school nurses. The PC-SAS program was used for statistical analysis such as percent distribution, chi-squared test, spearman correlation test, and logistic regression. The use of media materials in health education has become extremely common. Unfortunately, much of the early materials were of poor production quality, reflected low levels of interest, and generally did little to enhance health education programming. A recent trend in media materials is a move away from the fact filled production to a more affective, process-oriented approach. There is an obvious need for health educators to use high-quality, polished productions in order to counteract the same levels of quality used by commercial agencies that often promote "unhealthy" lifestyles. Health educators need to be aware of the advantages and disadvantages of the various forms of media. Selecting media materials should be based on more than cost, availability, and personal preference. Selection should be based on the goal of achieving behavioral objectives formulated before the review process begins. The decision to use no media materials rather than something of dubious quality usually be the right decision. Poor-quality, outdated, or boring materials will usually have a detrimental effect on the presentation. Media materials should be viewed as vehicles to enhance learning, not products that will stand in isolation. Process of materials is an essential part of the educational process. The major results were as follows : 1. The elementary schools used the materials more frequently. But the production rate of media materials was not enough. The budget was too small for a wide use of media materials in school health education. These findings suggest that all schools have to increase the budget of health education programs. 2. Computers offer an incredibly diverse set of possibilities for use in health education, ranging from complicated statistical analysis to elementary-school-level health education games. But the use rate of this material was not high. The development of related software is essential. Health educators would be well advised to develop a basic operating knowledge of media equipment. 3. In this study, the most effective materials were films in elementary school and videotapes in middle and high school. Film tends to be a more emotive medium than videotape. The difficulties of media selection involved the small amount of extant educational materials. Media selection is a multifaceted process and should be based on a combination of sound principles. 4. The review of material use following student levels showed that the more the contents were various, the more the use rate was high. 5. Health education videotapes and overhead projectors proved the most plentiful and widest media tools. The information depicted was more likely to be current. As a means to display both text and graphic information, this instructional medium has proven to be both effective and enduring. 6. An analysis of how effective the quality of school nurse and school use of media materials shows a result that is not complete (p=0.1113). But, the budget of health education is a significant variable. The increase of the budget therefore is essential to effective use of media materials. From these results it is recommended that various media materials be developed and be wide used.