• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.3
• /
• pp.153-165
• /
• 2023

The purpose of this study is to propose effective scenarios for green areas in apartment complexes that can improve the connection between green spaces considering wind flow, thermal comfort, and mitigation of the urban heat island effect. The study site was an apartment complex in Godeok-dong, Gangdong-gu, Seoul, Korea. The site selection was based on comparing temperatures and discomfort index data collected from June to August 2020. Initially, the thermal and wind environment of the current site was analyzed. Based on the findings, three scenarios were proposed, taking into account both green patches and corridor elements: Scenario 1 (green patch), Scenario 2 (green corridor), and Scenario 3 (green patch & corridor). Subsequently, each scenario's wind speed, wind flow, and thermal comfort were analyzed using ENVI-met to compare their effectiveness in mitigating the urban heat island effect. The study results demonstrated that green patches contributed to increased wind speed and improved wind flow, leading to a reduction of 31..20% in the predicted mean vote (PMV) and 68.59% in the predicted percentage of dissatisfied (PET). On the other hand, green corridors facilitated the connection of wind paths and further increased wind speed compared to green patches. They proved to be more effective than green patches in mitigating the urban heat island, resulting in a reduction of 92.47% in PMV and 90.14% in PET. The combination of green patches and green corridors demonstrated the greatest increase in wind speed and strong connectivity within the apartment complex, resulting in a reduction of 95.75% in PMV and 95.35% in PET. However, patches in narrow areas were found to be more effective in improving thermal comfort than green corridors. Therefore, to effectively mitigate the urban heat island effect, enhancing green areas by incorporating green corridors in conjunction with green patches is recommended. This study can serve as fundamental data for planning green areas to mitigate future urban heat island effects in apartment complexes. Additionally, it can be considered a method to improve urban resilience in response to the challenges posed by the urban heat island effect.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.69 no.1
• /
• pp.49-60
• /
• 2024

A region can be divided into cultivation zones based on homogeneity in weather variables that have the greatest influence on crop growth and yield. This study classified the cultivation zone of soybean using weather indices as a prior study to classify the agroclimatic zone of soybean. Meteorological factors affecting soybeans were determined through correlation analysis over a 10 year period (from 2013 to 2022) using data from the Miryang and Suwon regions collected from the soybean yield trial database of the Rural Development Administration, Korea and the meteorological database of the Korea Meteorological Administration. The correlation between growth characteristics and the minimum temperature, daily temperature range, and precipitation were high during the vegetative growth stages. Moreover, the correlation between yield components and the maximum temperature, daily temperature range, and precipitation were high during the reproductive growth stages. As a result of k-means clustering, soybean cultivation zones were divided into three zones. Zone 1 was the central inland region and southern Gyeonggi-do; Zone 2 was the southern part of the west coast, the southern part of the east coast, and the South Sea; and Zone 3 included parts of eastern Gyeonggi-do, Gangwon-do, and areas with high altitudes. Zone 1, which has a wide latitude range, was further subdivided into three cultivation zones. The results of this study may provide useful information for estimating agrometeorological characteristics and predicting the success of soybean cultivation in South Korea.

• Journal of Venture Innovation
• /
• v.7 no.3
• /
• pp.45-63
• /
• 2024

The success of a company in the market is linked to the value it delivers to its customers. However, that value is not always constant. As the environment changes, so do customer experiences and requirements, and eventually the value they seek also evolves. Thus, a timely, clear, and effective value proposition, along with the associated benefits, becomes the functional, psychological, and economic foundation of a business. Therefore, the customer value proposition is crucial in terms of Product-Market Fit (PMF), establishing competitive differentiation, and delivering consistent messaging. Despite this, the most widely known and utilized model related to the Customer Value Proposition (CVP) in general businesses is the Value Proposition Canvas (VPC) by Osterwalder and Pigneur. Apart from that, there are only a few other models used by scholars and experts. In this paper, I selected the VPC model, which is widely used by business practitioners globally, and two other major CVP models well-known to experts. I conducted a detailed analysis of these models and derived the essential elements and key features of a customer value proposition. These were then combined with the Lean Startup methodology, which is frequently used for innovation today, to design an integrated CVP model that startups can easily utilize. The framework proposed in this study is a comprehensive CVP model that incorporates the strengths, weaknesses, characteristics, and commonalities of the three existing CVP models. It is designed to flexibly adapt depending on the business direction or strategic characteristics of the company by comprehensively considering all circumstances of the entire company or a specific product/service. Additionally, it systematically manages the contents of customers' wants & needs, strategic focus, and growth horizons, even after application. The Integrative-Lean CVP Model, designed for easy use by startups, is expected to help them with limited funding and marketing capabilities identify value proposition elements for timely PMF, fostering the creation of a new startup ecosystem.

• Journal of the Korean earth science society
• /
• v.29 no.2
• /
• pp.189-203
• /
• 2008

Microcomputer Based Laboratory (MBL), by offering accurate and effective data collection and real-time graphs, enables students to reduce experiment time and, thereby, have deeper discussions concerning experimental results. This helps to emphasis the essential aspect of scientific inquiry; the process communication. Therefore, this study examined secondary school earth science MBL lessons with regards to the five basic aspects of scientific inquiry: "Asking", "Evidencing", "Explaining", "Evaluating" and "Communicating". It then investigated the level of argumentative communication between the students and teachers and also among the students themselves. For this study, three classroom activities were observed and videotaped, and teaching materials, textbooks and students' notes were collected. The transcribed data were analyzed from the perspective of scientific inquiry level and argument frames. The results showed that the scientific inquiry levels of the three classes were similar, except for the "Communicating" aspect, which appeared in only one episode. "Asking" was carried out by the teacher and then students were directed to collect certain data in the "Evidencing" stage. Furthermore, students were given possible ways to use evidence to formulate explanations and connections through the "Explaining" and "Evaluating" stages. In the argumentation analysis, most argumentative communication was identified as being associated with a given procedure, rather than with any scientific phenomena. In only one episode, did "Communicating" relate directly to any scientific phenomena. It can be concluded, that although MEL places emphasis on communication for authentic scientific inquiry, the environment required for such inquiry and argumentative communication can not be easily created in the classroom. Therefore, in order for authentic inquiry to take place in the MBL classroom, teachers should provide students with the opportunity to develop meaningful argumentation and scaffolding abilities.

• Korean Journal of Ecology and Environment
• /
• v.39 no.3 s.117
• /
• pp.320-330
• /
• 2006

An integrated health of a lotic ecosystem, Cho River, was evaluated by various approaches such as conventional water quality analysis, physical assessments of Qualitative Habitat Evaluation Index (QHEI), and the bioassay of Index of Biological Integrity (IBI) durin August${\sim}$September 2005. The IBI model used in the study was based on original multivariate metric model and then modified the metric attributes of the model for the regional application. Physical habitat health, based on the QHEI, was estimated using eleven metrics. During the study, values of IBI model averaged 36, which was judged as 'fair' to 'good' conditions. Spatial variations in the model values were evident: the headwater site (S1) was estimated as 48, indicating an 'excellent' condition, and the other sites were estimated 32${\sim}$38, 'good' condition. Values of the QHEI in the all sites averaged 148, which is judged as a good condition. The QHEI values varied from 120 (fair condition) to 199 (excellent condition) depending on the location of the stream. Site 5 (S5) was estimated as 'fair${\sim}$good' condition, while Site 7 (S7) was estimated as 'excellent' condition. The biological health, based on the IBI, reflected the habitat health. However, chemical conditions in terms of pH, turbidity, electric conductivity, dissolved oxygen (DO) did not make a difference in the biological health because of minor chemical differences among the locations.

• Journal of Korea Multimedia Society
• /
• v.14 no.1
• /
• pp.54-75
• /
• 2011

PoC(Push-to-talk Over Cellular) is an integrated technology of group voice calls, video calls and internet based multimedia services. If a PoC user can not participate in the PoC session for various reasons such as an emergency situation, lack of battery capacity, then the user can use the PoC Box which has a similar functionality to the MM Box in the MMS(Multimedia Messaging Service). The RTSP(Real-Time Streaming Protocol) method is recommended to be used when there is a transmission session between the PoC box and a terminal. Since the existing VOD service uses a wired network, the packet size of RTSP-based VOD service is huge, however, the PoC service has wireless communication environments which have general characteristics to be used in RTSP method. Packet loss in a wired communication environments is relatively less than that in wireless communication environment, therefore, a buffering latency occurs in PoC service due to a play-out delay which means an asynchronous play of audio & video contents. Those problems make a user to be difficult to find the information they want when the media contents are played-out. In this paper, the following techniques and methods were proposed and their performance and superiority were verified through testing: cross-over dual reception buffering technique, advance partition multi-reception buffering technique, and on-demand multi-reception buffering technique, which are designed for effective picking up of information in media content being transmitted in short amount of time using RTSP when a user searches for media, as well as for reduction in playback delay; and same-priority packetization transmission method and priority-based packetization transmission method, which are media data packetization methods for transmission. From the simulation of functional evaluation, we could find that the proposed multiple receiving buffering and packetizing methods are superior, with respect to the media retrieval inclination, to the existing single receiving buffering method by 6-9 points from the viewpoint of effectiveness and excellence. Among them, especially, on-demand multiple receiving buffering technology with same-priority packetization transmission method is able to manage the media search inclination promptly to the requests of users by showing superiority of 3-24 points above compared to other combination methods. In addition, users could find the information they want much quickly since large amount of informations are received in a focused media retrieval period within a short time.

• Resources Recycling
• /
• v.17 no.2
• /
• pp.55-62
• /
• 2008

Amount of waste is always generated in industrialization process and it is gradually increasing. Domestic and industrial waste in 2003 increased by 9.5 percent than that of the last year(2002), whereas the amount of construction waste increased largely by 21 percent. Recently construction waste of total waste accounts for nearly 50 percent, waste concrete and Ascon from the construction waste takes up to 73 percent. Furthermore, amount of natural materials are gradually decreasing, that is, they are not sufficient any more. Owing to these reasons, the importance of recycling construction waste has been emphasized. The use of recycling aggregate makes the disposal of construction waste easier as well as protects environment from gathering raw aggregate. Also, it has the alternative effect economizing the insufficient new natural aggregate. This study employs the cost-benefit model to analyze the economic effect of construction waste recycling of Ascon which takes relatively high part of the total waste. The cost-comparison between raw aggregate and recycling aggregate were analyzed. With the model, the economic effect of Ascon recycling in 2003 and 2004 in capital area of Korea were analysed. Cost comparison between raw aggregate and recycling aggregate were also carried out. The result showed that the economic effect of Ascon recycling increased to 0.0808 for 2004 as compared 0.0694 for 2003. We could not conclude using above data, but this result shows that the economic benefit of Ascon recycling of construction waste has increased.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.8
• /
• pp.950-955
• /
• 2007

Non-point source control system which had been designed only for oil-water separation in the fields of oil refinery and garage was upgraded in this research for the removal of runoff pollutants in impervious urban area. Pollutants including oil from driveway and bridge were eliminated by two types of pathway in the system. One is the coalescence mechanism that the oil droplets in the runoff come into contact with each other in the spiral buoyant media surface and form larger coalesced droplets of oil that are carried upstream to the oil layer. The other is the precipitation that solids in runoff were settled by gravity in the system. In this research, coalescing characteristics of oil and water separation were investigated through image analyses, and efficiencies of the non-point source control system were evaluated using dust in driveway and waste engine oil. Media made of high density and high molecular weight polyethylene was indeterminate helical shape and had sleek surface by analysing SEM photographs and BET. Surface area and specific gravity of media which were measured directly were 1,428 $mm^2$ and 45.3 $kg/m^3$ respectively. From the image analyses of the oil droplets photographs which were taken by using microscope, it was proved clearly that the coalescence was the main pathway in the removal of oil from the runoff. Finally, the performances of the non-point source control system filled up with the media were suspended solid $86.6\sim95.2%$, $COD_{Cr}$, $87.3\sim95.4%$, n-Hexane extractable materials $71.8\sim94.8%$ respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.12
• /
• pp.792-800
• /
• 2012

The study was performed to simulate the reduction efficiency of suspended solids (SS) for cultivated land located at riverine area at the Namhan River and the Bukhan River watershed sites (site A, B, C) under the rainfall conditions using HUFF & SCS UH-based VFS Design module of Web GIS-based VFSMOD System. The study indicates that the field 5% sloped, located at Bukhan River watershed (site A), requires at least 0.5 m width of Vegetative Filter Strip (VFS) to reduce 70% of SS while the field 10% sloped requires the at least 1.0~1.5 m width of VFS to reduce 70% SS, under the condition 106.2 mm of rainfall event and bell pepper or corn of crops. Against the conditions 95.1 mm of rainfall event and sweet potato or soy bean of crops, the field 5% sloped, located at Namhan River watershed (site B) requires at least 0.5 m width of VFS to reduce 70% of SS while the field 10% sloped requires at least 1.0 m width of VFS to reduce 50% SS. The crops sweet potato and soy bean are cultivated in the site C, located at Namhan River watershed, 1 m of VFS is capable of 64.0% and 62.0% of SS reduction against 102.6 mm and 151.2 mm rainfall conditions respectively, for the 5% sloped field. The result supports that VFS is one of most potential methods to reduce SS from cultivated area, which is environment-friendly hydrologic structure. The VFS design, however, needs to be simulated before its installation in the field, the simulation needs to consider not only various characteristics of the field but also different conditions affecting the VFS, using a model capable to consider a lot of factors.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.2
• /
• pp.223-233
• /
• 2013

The purpose of this study was to analyze the dietary habits and perception of vegetable intake of elementary students in Gwangju and Jeonnam Gokseong county. Data collection was conducted from 5th and 6th grade students of elementary schools in Gwangju and Jeonnam Gokseong county using a structured questionnaire survey. The SPSS program was used for statistics processing and data analysis. The chi-square test was also conducted. In terms of dietary intake habits, female students consumed their meals slower than male students. Information on dietary habits and nutrition was commonly obtained from family, including the mother or father who commonly prepared meals at home. Snacks were commonly consumed less than twice daily, with the Gwangju area having a higher frequency of snacks than the Jeonnam area. Elementary students indicated that vegetables were their least favorite food, with female students having a higher interest in vegetables than male students. The pattern and perception of vegetable intake came when the students (that did not eat vegetables) were lectured by their parents on the nutritive value of vegetables. Most students understood the important nutritional ingredients of vegetables. In the case of an interest in vegetables, the Gwangju area showed significantly more comprehension than the Jeonnam area on the definition and role of dietary fiber, the dental benefits of dietary fiber, and the identification of the environment-friendly certification mark.